| /* |
| * Copyright (C) 2009 BuS Elektronik GmbH & Co. KG |
| * Jens Scharsig (esw@bus-elektronik.de) |
| * |
| * (C) Copyright 2003 |
| * Author : Hamid Ikdoumi (Atmel) |
| |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #ifndef CONFIG_AT91_LEGACY |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/at91_emac.h> |
| #include <asm/arch/at91_pmc.h> |
| #include <asm/arch/at91_pio.h> |
| #else |
| /* remove next 5 lines, if all RM9200 boards convert to at91 arch */ |
| #include <asm/arch-at91/at91rm9200.h> |
| #include <asm/arch-at91/hardware.h> |
| #include <asm/arch-at91/at91_emac.h> |
| #include <asm/arch-at91/at91_pmc.h> |
| #include <asm/arch-at91/at91_pio.h> |
| #endif |
| #include <net.h> |
| #include <netdev.h> |
| #include <malloc.h> |
| #include <miiphy.h> |
| #include <linux/mii.h> |
| |
| #undef MII_DEBUG |
| #undef ET_DEBUG |
| |
| #if (CONFIG_SYS_RX_ETH_BUFFER > 1024) |
| #error AT91 EMAC supports max 1024 RX buffers. \ |
| Please decrease the CONFIG_SYS_RX_ETH_BUFFER value |
| #endif |
| |
| #ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR |
| #define CONFIG_DRIVER_AT91EMAC_PHYADDR 0 |
| #endif |
| |
| /* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */ |
| #if (AT91C_MASTER_CLOCK > 80000000) |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_64 |
| #elif (AT91C_MASTER_CLOCK > 40000000) |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_32 |
| #elif (AT91C_MASTER_CLOCK > 20000000) |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_16 |
| #else |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_8 |
| #endif |
| |
| #ifdef ET_DEBUG |
| #define DEBUG_AT91EMAC(...) printf(__VA_ARGS__); |
| #else |
| #define DEBUG_AT91EMAC(...) |
| #endif |
| |
| #ifdef MII_DEBUG |
| #define DEBUG_AT91PHY(...) printf(__VA_ARGS__); |
| #else |
| #define DEBUG_AT91PHY(...) |
| #endif |
| |
| #ifndef CONFIG_DRIVER_AT91EMAC_QUIET |
| #define VERBOSEP(...) printf(__VA_ARGS__); |
| #else |
| #define VERBOSEP(...) |
| #endif |
| |
| #define RBF_ADDR 0xfffffffc |
| #define RBF_OWNER (1<<0) |
| #define RBF_WRAP (1<<1) |
| #define RBF_BROADCAST (1<<31) |
| #define RBF_MULTICAST (1<<30) |
| #define RBF_UNICAST (1<<29) |
| #define RBF_EXTERNAL (1<<28) |
| #define RBF_UNKOWN (1<<27) |
| #define RBF_SIZE 0x07ff |
| #define RBF_LOCAL4 (1<<26) |
| #define RBF_LOCAL3 (1<<25) |
| #define RBF_LOCAL2 (1<<24) |
| #define RBF_LOCAL1 (1<<23) |
| |
| #define RBF_FRAMEMAX CONFIG_SYS_RX_ETH_BUFFER |
| #define RBF_FRAMELEN 0x600 |
| |
| typedef struct { |
| unsigned long addr, size; |
| } rbf_t; |
| |
| typedef struct { |
| rbf_t rbfdt[RBF_FRAMEMAX]; |
| unsigned long rbindex; |
| } emac_device; |
| |
| void at91emac_EnableMDIO(at91_emac_t *at91mac) |
| { |
| /* Mac CTRL reg set for MDIO enable */ |
| writel(readl(&at91mac->ctl) | AT91_EMAC_CTL_MPE, &at91mac->ctl); |
| } |
| |
| void at91emac_DisableMDIO(at91_emac_t *at91mac) |
| { |
| /* Mac CTRL reg set for MDIO disable */ |
| writel(readl(&at91mac->ctl) & ~AT91_EMAC_CTL_MPE, &at91mac->ctl); |
| } |
| |
| int at91emac_read(at91_emac_t *at91mac, unsigned char addr, |
| unsigned char reg, unsigned short *value) |
| { |
| at91emac_EnableMDIO(at91mac); |
| |
| writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R | |
| AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 | |
| AT91_EMAC_MAN_PHYA(addr), |
| &at91mac->man); |
| udelay(10000); |
| *value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK; |
| |
| at91emac_DisableMDIO(at91mac); |
| |
| DEBUG_AT91PHY("AT91PHY read %x REG(%d)=%x\n", at91mac, reg, *value) |
| |
| return 0; |
| } |
| |
| int at91emac_write(at91_emac_t *at91mac, unsigned char addr, |
| unsigned char reg, unsigned short value) |
| { |
| DEBUG_AT91PHY("AT91PHY write %x REG(%d)=%x\n", at91mac, reg, &value) |
| |
| at91emac_EnableMDIO(at91mac); |
| |
| writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_W | |
| AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 | |
| AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK), |
| &at91mac->man); |
| udelay(10000); |
| |
| at91emac_DisableMDIO(at91mac); |
| return 0; |
| } |
| |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) |
| |
| at91_emac_t *get_emacbase_by_name(char *devname) |
| { |
| struct eth_device *netdev; |
| |
| netdev = eth_get_dev_by_name(devname); |
| return (at91_emac_t *) netdev->iobase; |
| } |
| |
| int at91emac_mii_read(char *devname, unsigned char addr, |
| unsigned char reg, unsigned short *value) |
| { |
| at91_emac_t *emac; |
| |
| emac = get_emacbase_by_name(devname); |
| at91emac_read(emac , addr, reg, value); |
| return 0; |
| } |
| |
| |
| int at91emac_mii_write(char *devname, unsigned char addr, |
| unsigned char reg, unsigned short value) |
| { |
| at91_emac_t *emac; |
| |
| emac = get_emacbase_by_name(devname); |
| at91emac_write(emac, addr, reg, value); |
| return 0; |
| } |
| |
| #endif |
| |
| static int at91emac_phy_reset(struct eth_device *netdev) |
| { |
| int i; |
| u16 status, adv; |
| at91_emac_t *emac; |
| |
| emac = (at91_emac_t *) netdev->iobase; |
| |
| adv = ADVERTISE_CSMA | ADVERTISE_ALL; |
| at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_ADVERTISE, adv); |
| VERBOSEP("%s: Starting autonegotiation...\n", netdev->name); |
| at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR, |
| (BMCR_ANENABLE | BMCR_ANRESTART)); |
| |
| for (i = 0; i < 100000 / 100; i++) { |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_BMSR, &status); |
| if (status & BMSR_ANEGCOMPLETE) |
| break; |
| udelay(100); |
| } |
| |
| if (status & BMSR_ANEGCOMPLETE) { |
| VERBOSEP("%s: Autonegotiation complete\n", netdev->name); |
| } else { |
| printf("%s: Autonegotiation timed out (status=0x%04x)\n", |
| netdev->name, status); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int at91emac_phy_init(struct eth_device *netdev) |
| { |
| u16 phy_id, status, adv, lpa; |
| int media, speed, duplex; |
| int i; |
| at91_emac_t *emac; |
| |
| emac = (at91_emac_t *) netdev->iobase; |
| |
| /* Check if the PHY is up to snuff... */ |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_PHYSID1, &phy_id); |
| if (phy_id == 0xffff) { |
| printf("%s: No PHY present\n", netdev->name); |
| return 1; |
| } |
| |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_BMSR, &status); |
| |
| if (!(status & BMSR_LSTATUS)) { |
| /* Try to re-negotiate if we don't have link already. */ |
| if (at91emac_phy_reset(netdev)) |
| return 2; |
| |
| for (i = 0; i < 100000 / 100; i++) { |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_BMSR, &status); |
| if (status & BMSR_LSTATUS) |
| break; |
| udelay(100); |
| } |
| } |
| if (!(status & BMSR_LSTATUS)) { |
| VERBOSEP("%s: link down\n", netdev->name); |
| return 3; |
| } else { |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_ADVERTISE, &adv); |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, |
| MII_LPA, &lpa); |
| media = mii_nway_result(lpa & adv); |
| speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) |
| ? 1 : 0); |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; |
| VERBOSEP("%s: link up, %sMbps %s-duplex\n", |
| netdev->name, |
| speed ? "100" : "10", |
| duplex ? "full" : "half"); |
| } |
| return 0; |
| } |
| |
| int at91emac_UpdateLinkSpeed(at91_emac_t *emac) |
| { |
| unsigned short stat1; |
| |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1); |
| |
| if (!(stat1 & BMSR_LSTATUS)) /* link status up? */ |
| return 1; |
| |
| if (stat1 & BMSR_100FULL) { |
| /*set Emac for 100BaseTX and Full Duplex */ |
| writel(readl(&emac->cfg) | |
| AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD, |
| &emac->cfg); |
| return 0; |
| } |
| |
| if (stat1 & BMSR_10FULL) { |
| /*set MII for 10BaseT and Full Duplex */ |
| writel((readl(&emac->cfg) & |
| ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD) |
| ) | AT91_EMAC_CFG_FD, |
| &emac->cfg); |
| return 0; |
| } |
| |
| if (stat1 & BMSR_100HALF) { |
| /*set MII for 100BaseTX and Half Duplex */ |
| writel((readl(&emac->cfg) & |
| ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD) |
| ) | AT91_EMAC_CFG_SPD, |
| &emac->cfg); |
| return 0; |
| } |
| |
| if (stat1 & BMSR_10HALF) { |
| /*set MII for 10BaseT and Half Duplex */ |
| writel((readl(&emac->cfg) & |
| ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)), |
| &emac->cfg); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int at91emac_init(struct eth_device *netdev, bd_t *bd) |
| { |
| int i; |
| u32 value; |
| emac_device *dev; |
| at91_emac_t *emac; |
| at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; |
| at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; |
| |
| emac = (at91_emac_t *) netdev->iobase; |
| dev = (emac_device *) netdev->priv; |
| |
| /* PIO Disable Register */ |
| value = AT91_PMX_AA_EMDIO | AT91_PMX_AA_EMDC | |
| AT91_PMX_AA_ERXER | AT91_PMX_AA_ERX1 | |
| AT91_PMX_AA_ERX0 | AT91_PMX_AA_ECRS | |
| AT91_PMX_AA_ETX1 | AT91_PMX_AA_ETX0 | |
| AT91_PMX_AA_ETXEN | AT91_PMX_AA_EREFCK; |
| |
| writel(value, &pio->pioa.pdr); |
| writel(value, &pio->pioa.asr); |
| |
| #ifdef CONFIG_RMII |
| value = AT91_PMX_BA_ERXCK; |
| #else |
| value = AT91_PMX_BA_ERXCK | AT91_PMX_BA_ECOL | |
| AT91_PMX_BA_ERXDV | AT91_PMX_BA_ERX3 | |
| AT91_PMX_BA_ERX2 | AT91_PMX_BA_ETXER | |
| AT91_PMX_BA_ETX3 | AT91_PMX_BA_ETX2; |
| #endif |
| writel(value, &pio->piob.pdr); |
| writel(value, &pio->piob.bsr); |
| |
| writel(1 << AT91_ID_EMAC, &pmc->pcer); |
| writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); |
| |
| /* Init Ethernet buffers */ |
| for (i = 0; i < RBF_FRAMEMAX; i++) { |
| dev->rbfdt[i].addr = (unsigned long) NetRxPackets[i]; |
| dev->rbfdt[i].size = 0; |
| } |
| dev->rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP; |
| dev->rbindex = 0; |
| writel((u32) &(dev->rbfdt[0]), &emac->rbqp); |
| |
| writel(readl(&emac->rsr) & |
| ~(AT91_EMAC_RSR_OVR | AT91_EMAC_RSR_REC | AT91_EMAC_RSR_BNA), |
| &emac->rsr); |
| |
| value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC | |
| HCLK_DIV; |
| #ifdef CONFIG_RMII |
| value |= AT91_EMAC_CFG_RMII; |
| #endif |
| writel(value, &emac->cfg); |
| |
| writel(readl(&emac->ctl) | AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE, |
| &emac->ctl); |
| |
| if (!at91emac_phy_init(netdev)) { |
| at91emac_UpdateLinkSpeed(emac); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static void at91emac_halt(struct eth_device *netdev) |
| { |
| at91_emac_t *emac; |
| |
| emac = (at91_emac_t *) netdev->iobase; |
| writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE), |
| &emac->ctl); |
| DEBUG_AT91EMAC("halt MAC\n"); |
| } |
| |
| static int at91emac_send(struct eth_device *netdev, volatile void *packet, |
| int length) |
| { |
| at91_emac_t *emac; |
| |
| emac = (at91_emac_t *) netdev->iobase; |
| |
| while (!(readl(&emac->tsr) & AT91_EMAC_TSR_BNQ)) |
| ; |
| writel((u32) packet, &emac->tar); |
| writel(AT91_EMAC_TCR_LEN(length), &emac->tcr); |
| while (AT91_EMAC_TCR_LEN(readl(&emac->tcr))) |
| ; |
| DEBUG_AT91EMAC("Send %d \n", length); |
| writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr); |
| return 0; |
| } |
| |
| static int at91emac_recv(struct eth_device *netdev) |
| { |
| emac_device *dev; |
| at91_emac_t *emac; |
| rbf_t *rbfp; |
| int size; |
| |
| emac = (at91_emac_t *) netdev->iobase; |
| dev = (emac_device *) netdev->priv; |
| |
| rbfp = &dev->rbfdt[dev->rbindex]; |
| while (rbfp->addr & RBF_OWNER) { |
| size = rbfp->size & RBF_SIZE; |
| NetReceive(NetRxPackets[dev->rbindex], size); |
| |
| DEBUG_AT91EMAC("Recv[%d]: %d bytes @ %x \n", |
| dev->rbindex, size, rbfp->addr); |
| |
| rbfp->addr &= ~RBF_OWNER; |
| rbfp->size = 0; |
| if (dev->rbindex < (RBF_FRAMEMAX-1)) |
| dev->rbindex++; |
| else |
| dev->rbindex = 0; |
| |
| rbfp = &(dev->rbfdt[dev->rbindex]); |
| if (!(rbfp->addr & RBF_OWNER)) |
| writel(readl(&emac->rsr) | AT91_EMAC_RSR_REC, |
| &emac->rsr); |
| } |
| |
| if (readl(&emac->isr) & AT91_EMAC_IxR_RBNA) { |
| /* EMAC silicon bug 41.3.1 workaround 1 */ |
| writel(readl(&emac->ctl) & ~AT91_EMAC_CTL_RE, &emac->ctl); |
| writel(readl(&emac->ctl) | AT91_EMAC_CTL_RE, &emac->ctl); |
| dev->rbindex = 0; |
| printf("%s: reset receiver (EMAC dead lock bug)\n", |
| netdev->name); |
| } |
| return 0; |
| } |
| |
| static int at91emac_write_hwaddr(struct eth_device *netdev) |
| { |
| emac_device *dev; |
| at91_emac_t *emac; |
| at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; |
| emac = (at91_emac_t *) netdev->iobase; |
| dev = (emac_device *) netdev->priv; |
| |
| writel(1 << AT91_ID_EMAC, &pmc->pcer); |
| DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", |
| cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), |
| cpu_to_le32(*((u32 *)netdev->enetaddr))); |
| writel(cpu_to_le32(*((u32 *)netdev->enetaddr)), &emac->sa2l); |
| writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), &emac->sa2h); |
| DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", |
| readl(&emac->sa2h), readl(&emac->sa2l)); |
| return 0; |
| } |
| |
| int at91emac_register(bd_t *bis, unsigned long iobase) |
| { |
| emac_device *emac; |
| emac_device *emacfix; |
| struct eth_device *dev; |
| |
| if (iobase == 0) |
| iobase = AT91_EMAC_BASE; |
| emac = malloc(sizeof(*emac)+512); |
| if (emac == NULL) |
| return 1; |
| dev = malloc(sizeof(*dev)); |
| if (dev == NULL) { |
| free(emac); |
| return 1; |
| } |
| /* alignment as per Errata (64 bytes) is insufficient! */ |
| emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00); |
| memset(emacfix, 0, sizeof(emac_device)); |
| |
| memset(dev, 0, sizeof(*dev)); |
| #ifndef CONFIG_RMII |
| sprintf(dev->name, "AT91 EMAC"); |
| #else |
| sprintf(dev->name, "AT91 EMAC RMII"); |
| #endif |
| dev->iobase = iobase; |
| dev->priv = emacfix; |
| dev->init = at91emac_init; |
| dev->halt = at91emac_halt; |
| dev->send = at91emac_send; |
| dev->recv = at91emac_recv; |
| dev->write_hwaddr = at91emac_write_hwaddr; |
| |
| eth_register(dev); |
| |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) |
| miiphy_register(dev->name, at91emac_mii_read, at91emac_mii_write); |
| #endif |
| return 1; |
| } |