blob: 1e5a43f0e0226463420f4eaa461f666972b27373 [file] [log] [blame]
/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <linux/compiler.h>
#include <asm/fsl_errata.h>
#include <asm/processor.h>
#include "fsl_corenet_serdes.h"
#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
/*
* This work-around is implemented in PBI, so just check to see if the
* work-around was actually applied. To do this, we check for specific data
* at specific addresses in DCSR.
*
* Array offsets[] contains a list of offsets within DCSR. According to the
* erratum document, the value at each offset should be 2.
*/
static void check_erratum_a4849(uint32_t svr)
{
void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
unsigned int i;
#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
static const uint8_t offsets[] = {
0x50, 0x54, 0x58, 0x90, 0x94, 0x98
};
#endif
#ifdef CONFIG_PPC_P4080
static const uint8_t offsets[] = {
0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
};
#endif
uint32_t x108; /* The value that should be at offset 0x108 */
for (i = 0; i < ARRAY_SIZE(offsets); i++) {
if (in_be32(dcsr + offsets[i]) != 2) {
printf("Work-around for Erratum A004849 is not enabled\n");
return;
}
}
#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
x108 = 0x12;
#endif
#ifdef CONFIG_PPC_P4080
/*
* For P4080, the erratum document says that the value at offset 0x108
* should be 0x12 on rev2, or 0x1c on rev3.
*/
if (SVR_MAJ(svr) == 2)
x108 = 0x12;
if (SVR_MAJ(svr) == 3)
x108 = 0x1c;
#endif
if (in_be32(dcsr + 0x108) != x108) {
printf("Work-around for Erratum A004849 is not enabled\n");
return;
}
/* Everything matches, so the erratum work-around was applied */
printf("Work-around for Erratum A004849 enabled\n");
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
/*
* This work-around is implemented in PBI, so just check to see if the
* work-around was actually applied. To do this, we check for specific data
* at specific addresses in the SerDes register block.
*
* The work-around says that for each SerDes lane, write BnTTLCRy0 =
* 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
*/
static void check_erratum_a4580(uint32_t svr)
{
const serdes_corenet_t __iomem *srds_regs =
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
unsigned int lane;
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
if (serdes_lane_enabled(lane)) {
const struct serdes_lane __iomem *srds_lane =
&srds_regs->lane[serdes_get_lane_idx(lane)];
/*
* Verify that the values we were supposed to write in
* the PBI are actually there. Also, the lower 15
* bits of res4[3] should be the same as the upper 15
* bits of res4[1].
*/
if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
(in_be32(&srds_lane->res4[1]) != 0x880000) ||
(in_be32(&srds_lane->res4[3]) != 0x40000044)) {
printf("Work-around for Erratum A004580 is "
"not enabled\n");
return;
}
}
}
/* Everything matches, so the erratum work-around was applied */
printf("Work-around for Erratum A004580 enabled\n");
}
#endif
static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
extern int enable_cpu_a011_workaround;
#endif
__maybe_unused u32 svr = get_svr();
#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
if (IS_SVR_REV(svr, 1, 0)) {
switch (SVR_SOC_VER(svr)) {
case SVR_P1013:
case SVR_P1022:
puts("Work-around for Erratum SATA A001 enabled\n");
}
}
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
puts("Work-around for Erratum SERDES8 enabled\n");
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9)
puts("Work-around for Erratum SERDES9 enabled\n");
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES_A005)
puts("Work-around for Erratum SERDES-A005 enabled\n");
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
if (SVR_MAJ(svr) < 3)
puts("Work-around for Erratum CPU22 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
/*
* NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
* also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
* The SVR has been checked by cpu_init_r().
*/
if (enable_cpu_a011_workaround)
puts("Work-around for Erratum CPU-A011 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_CPU_A003999)
puts("Work-around for Erratum CPU-A003999 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_A003474)
puts("Work-around for Erratum DDR-A003473 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
puts("Work-around for DDR MSYNC_IN Erratum enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
puts("Work-around for Erratum ESDHC111 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
puts("Work-around for Erratum A004468 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
puts("Work-around for Erratum ESDHC135 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
if (SVR_MAJ(svr) < 3)
puts("Work-around for Erratum ESDHC13 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
puts("Work-around for Erratum ESDHC-A001 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
puts("Work-around for Erratum CPC-A002 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
puts("Work-around for Erratum CPC-A003 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001
puts("Work-around for Erratum ELBC-A001 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
puts("Work-around for Erratum DDR-A003 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
puts("Work-around for Erratum DDR115 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
puts("Work-around for Erratum DDR111 enabled\n");
puts("Work-around for Erratum DDR134 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769
puts("Work-around for Erratum IFC-A002769 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
puts("Work-around for Erratum P1010-A003549 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
puts("Work-around for Erratum IFC A-003399 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
puts("Work-around for Erratum NMG DDR120 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
puts("Work-around for Erratum NMG_LBC103 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
puts("Work-around for Erratum NMG ETSEC129 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
puts("Work-around for Erratum A004510 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
puts("Work-around for Erratum SRIO-A004034 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
puts("Work-around for Erratum A004934 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
if (IS_SVR_REV(svr, 1, 0))
puts("Work-around for Erratum A005871 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
/* This work-around is implemented in PBI, so just check for it */
check_erratum_a4849(svr);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
/* This work-around is implemented in PBI, so just check for it */
check_erratum_a4580(svr);
#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
puts("Work-around for Erratum PCIe-A003 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
puts("Work-around for Erratum USB14 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
puts("Work-around for Erratum A006593 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
if (has_erratum_a006379())
puts("Work-around for Erratum A006379 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
if (IS_SVR_REV(svr, 1, 0))
puts("Work-around for Erratum A003571 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
puts("Work-around for Erratum A-005812 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005125
puts("Work-around for Erratum A005125 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
(SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
puts("Work-around for Erratum I2C-A004447 enabled\n");
#endif
return 0;
}
U_BOOT_CMD(
errata, 1, 0, do_errata,
"Report errata workarounds",
""
);