| /* |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * Gary Jennejohn <garyj@denx.de> |
| * David Mueller <d.mueller@elsoft.ch> |
| * |
| * (C) Copyright 2008 |
| * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> |
| * |
| * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */ |
| #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ |
| #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ |
| |
| #define CONFIG_PERIPORT_REMAP |
| #define CONFIG_PERIPORT_BASE 0x70000000 |
| #define CONFIG_PERIPORT_SIZE 0x13 |
| |
| #define CONFIG_SYS_IRAM_BASE 0x0c000000 /* Internal SRAM base address */ |
| #define CONFIG_SYS_IRAM_SIZE 0x2000 /* 8 KB of internal SRAM memory */ |
| #define CONFIG_SYS_IRAM_END (CONFIG_SYS_IRAM_BASE + CONFIG_SYS_IRAM_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END - GENERATED_GBL_DATA_SIZE) |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x50000000 |
| |
| /* input clock of PLL: SMDK6400 has 12MHz input clock */ |
| #define CONFIG_SYS_CLK_FREQ 12000000 |
| |
| #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) |
| #define CONFIG_ENABLE_MMU |
| #endif |
| |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_INITRD_TAG |
| |
| /* |
| * Architecture magic and machine type |
| */ |
| #define CONFIG_MACH_TYPE 1270 |
| |
| #define CONFIG_DISPLAY_CPUINFO |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_CS8900 /* we have a CS8900 on-board */ |
| #define CONFIG_CS8900_BASE 0x18800300 |
| #define CONFIG_CS8900_BUS16 /* follow the Linux driver */ |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */ |
| |
| #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #endif |
| |
| #define CONFIG_CMDLINE_EDITING |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| /*********************************************************** |
| * Command definition |
| ***********************************************************/ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_REGINFO |
| #define CONFIG_CMD_LOADS |
| #define CONFIG_CMD_LOADB |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_CMD_NAND |
| #if defined(CONFIG_BOOT_ONENAND) |
| #define CONFIG_CMD_ONENAND |
| #endif |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_EXT2 |
| |
| #define CONFIG_BOOTDELAY 3 |
| |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| |
| #if (CONFIG_COMMANDS & CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */ |
| |
| #define CONFIG_SYS_HZ 1000 |
| |
| /* valid baudrates */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */ |
| |
| /********************************** |
| Support Clock Settings |
| ********************************** |
| Setting SYNC ASYNC |
| ---------------------------------- |
| 667_133_66 X O |
| 533_133_66 O O |
| 400_133_66 X O |
| 400_100_50 O O |
| **********************************/ |
| |
| /*#define CONFIG_CLK_667_133_66*/ |
| #define CONFIG_CLK_533_133_66 |
| /* |
| #define CONFIG_CLK_400_100_50 |
| #define CONFIG_CLK_400_133_66 |
| #define CONFIG_SYNC_MODE |
| */ |
| |
| /* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */ |
| |
| #define CONFIG_SYS_FLASH_BASE 0x10000000 |
| #define CONFIG_SYS_MONITOR_BASE 0x00000000 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| /* AM29LV160B has 35 sectors, AM29LV800B - 19 */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 40 |
| |
| #define CONFIG_AMD_LV800 |
| #define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */ |
| /* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */ |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| #define CONFIG_FLASH_CFI_LEGACY |
| #define CONFIG_SYS_FLASH_LEGACY_512Kx16 |
| |
| /* timeout values are in ticks */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ |
| |
| #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
| |
| /* |
| * SMDK6400 board specific data |
| */ |
| |
| #define CONFIG_IDENT_STRING " for SMDK6400" |
| |
| /* base address for uboot */ |
| #define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000) |
| /* total memory available to uboot */ |
| #define CONFIG_SYS_UBOOT_SIZE (1024 * 1024) |
| |
| /* Put environment copies after the end of U-Boot owned RAM */ |
| #define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) |
| |
| #ifdef CONFIG_ENABLE_MMU |
| #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 |
| #define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ |
| "bootm 0xc0018000" |
| #else |
| #define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \ |
| "bootm 0x50018000" |
| #endif |
| |
| /* NAND U-Boot load and start address */ |
| #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000) |
| |
| #define CONFIG_ENV_OFFSET 0x0040000 |
| |
| /* NAND configuration */ |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_BASE 0x70200010 |
| #define CONFIG_SYS_S3C_NAND_HWECC |
| |
| #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ |
| #define CONFIG_SYS_NAND_WP 1 |
| #define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */ |
| #define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */ |
| |
| #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */ |
| #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */ |
| |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */ |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */ |
| |
| /* NAND chip page size */ |
| #define CONFIG_SYS_NAND_PAGE_SIZE 2048 |
| /* NAND chip block size */ |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) |
| /* NAND chip page per block count */ |
| #define CONFIG_SYS_NAND_PAGE_COUNT 64 |
| /* Location of the bad-block label */ |
| #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 |
| /* Extra address cycle for > 128MiB */ |
| #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| |
| /* Size of the block protected by one OOB (Spare Area in Samsung terminology) */ |
| #define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE |
| /* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */ |
| #define CONFIG_SYS_NAND_ECCBYTES 4 |
| /* Size of a single OOB region */ |
| #define CONFIG_SYS_NAND_OOBSIZE 64 |
| /* ECC byte positions */ |
| #define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ |
| 48, 49, 50, 51, 52, 53, 54, 55, \ |
| 56, 57, 58, 59, 60, 61, 62, 63} |
| |
| /* Boot configuration (define only one of next 3) */ |
| #define CONFIG_BOOT_NAND |
| /* None of these are currently implemented. Left from the original Samsung |
| * version for reference |
| #define CONFIG_BOOT_NOR |
| #define CONFIG_BOOT_MOVINAND |
| #define CONFIG_BOOT_ONENAND |
| */ |
| |
| #define CONFIG_NAND |
| #define CONFIG_NAND_S3C64XX |
| /* Unimplemented or unsupported. See comment above. |
| #define CONFIG_ONENAND |
| #define CONFIG_MOVINAND |
| */ |
| |
| /* Settings as above boot configuration */ |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_BOOTARGS "console=ttySAC,115200" |
| |
| #if !defined(CONFIG_ENABLE_MMU) |
| #define CONFIG_CMD_USB 1 |
| #define CONFIG_USB_S3C64XX |
| #define CONFIG_USB_OHCI_NEW 1 |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000 |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400" |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 |
| |
| #define CONFIG_USB_STORAGE 1 |
| #endif |
| #define CONFIG_DOS_PARTITION 1 |
| |
| #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU) |
| # error "usb_ohci.c is currently broken with MMU enabled." |
| #endif |
| |
| #endif /* __CONFIG_H */ |