| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * Boot support |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <linux/compiler.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| __maybe_unused |
| static void print_num(const char *name, ulong value) |
| { |
| printf("%-12s= 0x%08lX\n", name, value); |
| } |
| |
| __maybe_unused |
| static void print_eth(int idx) |
| { |
| char name[10], *val; |
| if (idx) |
| sprintf(name, "eth%iaddr", idx); |
| else |
| strcpy(name, "ethaddr"); |
| val = getenv(name); |
| if (!val) |
| val = "(not set)"; |
| printf("%-12s= %s\n", name, val); |
| } |
| |
| #ifndef CONFIG_DM_ETH |
| __maybe_unused |
| static void print_eths(void) |
| { |
| struct eth_device *dev; |
| int i = 0; |
| |
| do { |
| dev = eth_get_dev_by_index(i); |
| if (dev) { |
| printf("eth%dname = %s\n", i, dev->name); |
| print_eth(i); |
| i++; |
| } |
| } while (dev); |
| |
| printf("current eth = %s\n", eth_get_name()); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| } |
| #endif |
| |
| __maybe_unused |
| static void print_lnum(const char *name, unsigned long long value) |
| { |
| printf("%-12s= 0x%.8llX\n", name, value); |
| } |
| |
| __maybe_unused |
| static void print_mhz(const char *name, unsigned long hz) |
| { |
| char buf[32]; |
| |
| printf("%-12s= %6s MHz\n", name, strmhz(buf, hz)); |
| } |
| |
| #if defined(CONFIG_PPC) |
| void __weak board_detail(void) |
| { |
| /* Please define boot_detail() for your platform */ |
| } |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| #ifdef DEBUG |
| print_num("bd address", (ulong)bd); |
| #endif |
| print_num("memstart", bd->bi_memstart); |
| print_lnum("memsize", bd->bi_memsize); |
| print_num("flashstart", bd->bi_flashstart); |
| print_num("flashsize", bd->bi_flashsize); |
| print_num("flashoffset", bd->bi_flashoffset); |
| print_num("sramstart", bd->bi_sramstart); |
| print_num("sramsize", bd->bi_sramsize); |
| #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || \ |
| defined(CONFIG_MPC8260) || defined(CONFIG_E500) |
| print_num("immr_base", bd->bi_immr_base); |
| #endif |
| print_num("bootflags", bd->bi_bootflags); |
| #if defined(CONFIG_405EP) || \ |
| defined(CONFIG_405GP) || \ |
| defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ |
| defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ |
| defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ |
| defined(CONFIG_XILINX_405) |
| print_mhz("procfreq", bd->bi_procfreq); |
| print_mhz("plb_busfreq", bd->bi_plb_busfreq); |
| #if defined(CONFIG_405EP) || defined(CONFIG_405GP) || \ |
| defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ |
| defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ |
| defined(CONFIG_440SPE) || defined(CONFIG_XILINX_405) |
| print_mhz("pci_busfreq", bd->bi_pci_busfreq); |
| #endif |
| #else /* ! CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ |
| #if defined(CONFIG_CPM2) |
| print_mhz("vco", bd->bi_vco); |
| print_mhz("sccfreq", bd->bi_sccfreq); |
| print_mhz("brgfreq", bd->bi_brgfreq); |
| #endif |
| print_mhz("intfreq", bd->bi_intfreq); |
| #if defined(CONFIG_CPM2) |
| print_mhz("cpmfreq", bd->bi_cpmfreq); |
| #endif |
| print_mhz("busfreq", bd->bi_busfreq); |
| #endif /* CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ |
| |
| #ifdef CONFIG_ENABLE_36BIT_PHYS |
| #ifdef CONFIG_PHYS_64BIT |
| puts("addressing = 36-bit\n"); |
| #else |
| puts("addressing = 32-bit\n"); |
| #endif |
| #endif |
| |
| print_eth(0); |
| #if defined(CONFIG_HAS_ETH1) |
| print_eth(1); |
| #endif |
| #if defined(CONFIG_HAS_ETH2) |
| print_eth(2); |
| #endif |
| #if defined(CONFIG_HAS_ETH3) |
| print_eth(3); |
| #endif |
| #if defined(CONFIG_HAS_ETH4) |
| print_eth(4); |
| #endif |
| #if defined(CONFIG_HAS_ETH5) |
| print_eth(5); |
| #endif |
| |
| printf("IP addr = %s\n", getenv("ipaddr")); |
| printf("baudrate = %6u bps\n", gd->baudrate); |
| print_num("relocaddr", gd->relocaddr); |
| board_detail(); |
| return 0; |
| } |
| |
| #elif defined(CONFIG_NIOS2) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int i; |
| bd_t *bd = gd->bd; |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { |
| print_num("DRAM bank", i); |
| print_num("-> start", bd->bi_dram[i].start); |
| print_num("-> size", bd->bi_dram[i].size); |
| } |
| |
| print_num("flash start", (ulong)bd->bi_flashstart); |
| print_num("flash size", (ulong)bd->bi_flashsize); |
| print_num("flash offset", (ulong)bd->bi_flashoffset); |
| |
| #if defined(CONFIG_SYS_SRAM_BASE) |
| print_num ("sram start", (ulong)bd->bi_sramstart); |
| print_num ("sram size", (ulong)bd->bi_sramsize); |
| #endif |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_MICROBLAZE) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| int i; |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { |
| print_num("DRAM bank", i); |
| print_num("-> start", bd->bi_dram[i].start); |
| print_num("-> size", bd->bi_dram[i].size); |
| } |
| |
| print_num("flash start ", (ulong)bd->bi_flashstart); |
| print_num("flash size ", (ulong)bd->bi_flashsize); |
| print_num("flash offset ", (ulong)bd->bi_flashoffset); |
| #if defined(CONFIG_SYS_SRAM_BASE) |
| print_num("sram start ", (ulong)bd->bi_sramstart); |
| print_num("sram size ", (ulong)bd->bi_sramsize); |
| #endif |
| #if defined(CONFIG_CMD_NET) |
| print_eths(); |
| #endif |
| printf("baudrate = %u bps\n", gd->baudrate); |
| print_num("relocaddr", gd->relocaddr); |
| print_num("reloc off", gd->reloc_off); |
| print_num("fdt_blob", (ulong)gd->fdt_blob); |
| print_num("new_fdt", (ulong)gd->new_fdt); |
| print_num("fdt_size", (ulong)gd->fdt_size); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_SPARC) |
| |
| int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| #ifdef DEBUG |
| print_num("bd address ", (ulong) bd); |
| #endif |
| print_num("memstart ", bd->bi_memstart); |
| print_lnum("memsize ", bd->bi_memsize); |
| print_num("flashstart ", bd->bi_flashstart); |
| print_num("CONFIG_SYS_MONITOR_BASE ", CONFIG_SYS_MONITOR_BASE); |
| print_num("CONFIG_ENV_ADDR ", CONFIG_ENV_ADDR); |
| printf("CONFIG_SYS_RELOC_MONITOR_BASE = 0x%x (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_LEN); |
| printf("CONFIG_SYS_MALLOC_BASE = 0x%x (%d)\n", CONFIG_SYS_MALLOC_BASE, |
| CONFIG_SYS_MALLOC_LEN); |
| printf("CONFIG_SYS_INIT_SP_OFFSET = 0x%x (%d)\n", CONFIG_SYS_INIT_SP_OFFSET, |
| CONFIG_SYS_STACK_SIZE); |
| printf("CONFIG_SYS_PROM_OFFSET = 0x%x (%d)\n", CONFIG_SYS_PROM_OFFSET, |
| CONFIG_SYS_PROM_SIZE); |
| printf("CONFIG_SYS_GBL_DATA_OFFSET = 0x%x (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET, |
| GENERATED_GBL_DATA_SIZE); |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| printf("baudrate = %6u bps\n", gd->baudrate); |
| return 0; |
| } |
| |
| #elif defined(CONFIG_M68K) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| print_num("memstart", (ulong)bd->bi_memstart); |
| print_lnum("memsize", (u64)bd->bi_memsize); |
| print_num("flashstart", (ulong)bd->bi_flashstart); |
| print_num("flashsize", (ulong)bd->bi_flashsize); |
| print_num("flashoffset", (ulong)bd->bi_flashoffset); |
| #if defined(CONFIG_SYS_INIT_RAM_ADDR) |
| print_num("sramstart", (ulong)bd->bi_sramstart); |
| print_num("sramsize", (ulong)bd->bi_sramsize); |
| #endif |
| #if defined(CONFIG_SYS_MBAR) |
| print_num("mbar", bd->bi_mbar_base); |
| #endif |
| print_mhz("cpufreq", bd->bi_intfreq); |
| print_mhz("busfreq", bd->bi_busfreq); |
| #ifdef CONFIG_PCI |
| print_mhz("pcifreq", bd->bi_pcifreq); |
| #endif |
| #ifdef CONFIG_EXTRA_CLOCK |
| print_mhz("flbfreq", bd->bi_flbfreq); |
| print_mhz("inpfreq", bd->bi_inpfreq); |
| print_mhz("vcofreq", bd->bi_vcofreq); |
| #endif |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| #if defined(CONFIG_HAS_ETH1) |
| print_eth(1); |
| #endif |
| #if defined(CONFIG_HAS_ETH2) |
| print_eth(2); |
| #endif |
| #if defined(CONFIG_HAS_ETH3) |
| print_eth(3); |
| #endif |
| |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_BLACKFIN) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| printf("U-Boot = %s\n", bd->bi_r_version); |
| printf("CPU = %s\n", bd->bi_cpu); |
| printf("Board = %s\n", bd->bi_board_name); |
| print_mhz("VCO", bd->bi_vco); |
| print_mhz("CCLK", bd->bi_cclk); |
| print_mhz("SCLK", bd->bi_sclk); |
| |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| print_num("memstart", (ulong)bd->bi_memstart); |
| print_lnum("memsize", (u64)bd->bi_memsize); |
| print_num("flashstart", (ulong)bd->bi_flashstart); |
| print_num("flashsize", (ulong)bd->bi_flashsize); |
| print_num("flashoffset", (ulong)bd->bi_flashoffset); |
| |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_MIPS) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| print_num("memstart", (ulong)bd->bi_memstart); |
| print_lnum("memsize", (u64)bd->bi_memsize); |
| print_num("flashstart", (ulong)bd->bi_flashstart); |
| print_num("flashsize", (ulong)bd->bi_flashsize); |
| print_num("flashoffset", (ulong)bd->bi_flashoffset); |
| |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_AVR32) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| print_num("memstart", (ulong)bd->bi_dram[0].start); |
| print_lnum("memsize", (u64)bd->bi_dram[0].size); |
| print_num("flashstart", (ulong)bd->bi_flashstart); |
| print_num("flashsize", (ulong)bd->bi_flashsize); |
| print_num("flashoffset", (ulong)bd->bi_flashoffset); |
| |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_ARM) |
| |
| static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| int i; |
| bd_t *bd = gd->bd; |
| |
| print_num("arch_number", bd->bi_arch_number); |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { |
| print_num("DRAM bank", i); |
| print_num("-> start", bd->bi_dram[i].start); |
| print_num("-> size", bd->bi_dram[i].size); |
| } |
| |
| #ifdef CONFIG_SYS_MEM_RESERVE_SECURE |
| if (gd->secure_ram & MEM_RESERVE_SECURE_SECURED) { |
| print_num("Secure ram", |
| gd->secure_ram & MEM_RESERVE_SECURE_ADDR_MASK); |
| } |
| #endif |
| #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH) |
| print_eths(); |
| #endif |
| printf("baudrate = %u bps\n", gd->baudrate); |
| #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) |
| print_num("TLB addr", gd->arch.tlb_addr); |
| #endif |
| print_num("relocaddr", gd->relocaddr); |
| print_num("reloc off", gd->reloc_off); |
| print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ |
| print_num("sp start ", gd->start_addr_sp); |
| #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) |
| print_num("FB base ", gd->fb_base); |
| #endif |
| /* |
| * TODO: Currently only support for davinci SOC's is added. |
| * Remove this check once all the board implement this. |
| */ |
| #ifdef CONFIG_CLOCKS |
| printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq); |
| printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq); |
| printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq); |
| #endif |
| #ifdef CONFIG_BOARD_TYPES |
| printf("Board Type = %ld\n", gd->board_type); |
| #endif |
| return 0; |
| } |
| |
| #elif defined(CONFIG_SH) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| print_num("mem start ", (ulong)bd->bi_memstart); |
| print_lnum("mem size ", (u64)bd->bi_memsize); |
| print_num("flash start ", (ulong)bd->bi_flashstart); |
| print_num("flash size ", (ulong)bd->bi_flashsize); |
| print_num("flash offset ", (ulong)bd->bi_flashoffset); |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| printf("baudrate = %u bps\n", gd->baudrate); |
| return 0; |
| } |
| |
| #elif defined(CONFIG_X86) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int i; |
| bd_t *bd = gd->bd; |
| |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| print_num("bi_memstart", bd->bi_memstart); |
| print_num("bi_memsize", bd->bi_memsize); |
| print_num("bi_flashstart", bd->bi_flashstart); |
| print_num("bi_flashsize", bd->bi_flashsize); |
| print_num("bi_flashoffset", bd->bi_flashoffset); |
| print_num("bi_sramstart", bd->bi_sramstart); |
| print_num("bi_sramsize", bd->bi_sramsize); |
| print_num("bi_bootflags", bd->bi_bootflags); |
| print_mhz("cpufreq", bd->bi_intfreq); |
| print_mhz("busfreq", bd->bi_busfreq); |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { |
| print_num("DRAM bank", i); |
| print_num("-> start", bd->bi_dram[i].start); |
| print_num("-> size", bd->bi_dram[i].size); |
| } |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| print_mhz("ethspeed", bd->bi_ethspeed); |
| #endif |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_SANDBOX) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int i; |
| bd_t *bd = gd->bd; |
| |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { |
| print_num("DRAM bank", i); |
| print_num("-> start", bd->bi_dram[i].start); |
| print_num("-> size", bd->bi_dram[i].size); |
| } |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) |
| print_num("FB base ", gd->fb_base); |
| #endif |
| return 0; |
| } |
| |
| #elif defined(CONFIG_NDS32) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int i; |
| bd_t *bd = gd->bd; |
| |
| print_num("arch_number", bd->bi_arch_number); |
| print_num("boot_params", (ulong)bd->bi_boot_params); |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { |
| print_num("DRAM bank", i); |
| print_num("-> start", bd->bi_dram[i].start); |
| print_num("-> size", bd->bi_dram[i].size); |
| } |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_OPENRISC) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| print_num("mem start", (ulong)bd->bi_memstart); |
| print_lnum("mem size", (u64)bd->bi_memsize); |
| print_num("flash start", (ulong)bd->bi_flashstart); |
| print_num("flash size", (ulong)bd->bi_flashsize); |
| print_num("flash offset", (ulong)bd->bi_flashoffset); |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| |
| printf("baudrate = %u bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #elif defined(CONFIG_ARC) |
| |
| int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bd_t *bd = gd->bd; |
| |
| print_num("mem start", bd->bi_memstart); |
| print_lnum("mem size", bd->bi_memsize); |
| |
| #if defined(CONFIG_CMD_NET) |
| print_eth(0); |
| printf("ip_addr = %s\n", getenv("ipaddr")); |
| #endif |
| printf("baudrate = %d bps\n", gd->baudrate); |
| |
| return 0; |
| } |
| |
| #else |
| #error "a case for this architecture does not exist!" |
| #endif |
| |
| /* -------------------------------------------------------------------- */ |
| |
| U_BOOT_CMD( |
| bdinfo, 1, 1, do_bdinfo, |
| "print Board Info structure", |
| "" |
| ); |