blob: 0ec22eb918f19b86673047d7ab7098e10b61afe1 [file] [log] [blame]
/*
* hardware.h
*
* hardware specific header
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __AM33XX_HARDWARE_H
#define __AM33XX_HARDWARE_H
/* Module base addresses */
#define LOW_LEVEL_SRAM_STACK 0x4030B7FC
#define UART0_BASE 0x44E09000
/* DM Timer base addresses */
#define DM_TIMER0_BASE 0x4802C000
#define DM_TIMER1_BASE 0x4802E000
#define DM_TIMER2_BASE 0x48040000
#define DM_TIMER3_BASE 0x48042000
#define DM_TIMER4_BASE 0x48044000
#define DM_TIMER5_BASE 0x48046000
#define DM_TIMER6_BASE 0x48048000
#define DM_TIMER7_BASE 0x4804A000
/* GPIO Base address */
#define GPIO0_BASE 0x48032000
#define GPIO1_BASE 0x4804C000
#define GPIO2_BASE 0x481AC000
/* BCH Error Location Module */
#define ELM_BASE 0x48080000
/* Watchdog Timer */
#define WDT_BASE 0x44E35000
/* Control Module Base Address */
#define CTRL_BASE 0x44E10000
/* PRCM Base Address */
#define PRCM_BASE 0x44E00000
/* EMIF Base address */
#define EMIF4_0_CFG_BASE 0x4C000000
#define EMIF4_1_CFG_BASE 0x4D000000
#define DMM_BASE 0x4E000000
/* PLL related registers */
#define CM_PER 0x44E00000
#define CM_WKUP 0x44E00400
#define CM_DPLL 0x44E00500
#define CM_DEVICE 0x44E00700
#define CM_CEFUSE 0x44E00A00
#define PRM_DEVICE 0x44E00F00
/* VTP Base address */
#define VTP0_CTRL_ADDR 0x44E10E0C
/* DDR Base address */
#define DDR_CTRL_ADDR 0x44E10E04
#define DDR_CONTROL_BASE_ADDR 0x44E11404
#define DDR_PHY_BASE_ADDR 0x44E12000
#define DDR_PHY_BASE_ADDR2 0x44E120A4
/* UART */
#define DEFAULT_UART_BASE UART0_BASE
#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400)
#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE
#endif /* __AM33XX_HARDWARE_H */