| /* |
| * Copyright (C) Matrix Vision GmbH 2008 |
| * |
| * Matrix Vision mvBlueLYNX-M7 configuration file |
| * based on Freescale's MPC8349ITX. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <version.h> |
| |
| /* |
| * High Level Configuration Options |
| */ |
| #define CONFIG_E300 1 |
| #define CONFIG_MPC834x 1 |
| #define CONFIG_MPC8343 1 |
| |
| #define CONFIG_SYS_TEXT_BASE 0xFFF00000 |
| |
| #define CONFIG_SYS_IMMR 0xE0000000 |
| |
| #define CONFIG_PCI |
| #define CONFIG_PCI_INDIRECT_BRIDGE |
| #define CONFIG_PCI_SKIP_HOST_BRIDGE |
| #define CONFIG_TSEC_ENET |
| #define CONFIG_MPC8XXX_SPI |
| #define CONFIG_HARD_SPI |
| #define MVBLM7_MMC_CS 0x04000000 |
| #define CONFIG_MISC_INIT_R |
| |
| /* I2C */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_FSL |
| #define CONFIG_SYS_FSL_I2C_SPEED 100000 |
| #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 |
| #define CONFIG_SYS_FSL_I2C2_SPEED 100000 |
| #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 |
| |
| /* |
| * DDR Setup |
| */ |
| #undef CONFIG_SPD_EEPROM |
| |
| #define CONFIG_SYS_DDR_BASE 0x00000000 |
| #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE |
| #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE |
| #define CONFIG_SYS_83XX_DDR_USES_CS0 1 |
| #define CONFIG_SYS_MEMTEST_START (60<<20) |
| #define CONFIG_SYS_MEMTEST_END (70<<20) |
| #define CONFIG_VERY_BIG_RAM |
| |
| #define CONFIG_SYS_DDRCDR (DDRCDR_PZ_HIZ \ |
| | DDRCDR_NZ_HIZ \ |
| | DDRCDR_Q_DRN) |
| /* 0x22000001 */ |
| #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 |
| |
| #define CONFIG_SYS_DDR_SIZE 512 |
| |
| #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 |
| |
| #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f |
| |
| #define CONFIG_SYS_DDR_TIMING_0 0x00260802 |
| #define CONFIG_SYS_DDR_TIMING_1 0x3837c322 |
| #define CONFIG_SYS_DDR_TIMING_2 0x0f9848c6 |
| #define CONFIG_SYS_DDR_TIMING_3 0x00000000 |
| |
| #define CONFIG_SYS_DDR_SDRAM_CFG 0x43080008 |
| #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 |
| #define CONFIG_SYS_DDR_INTERVAL 0x02000100 |
| |
| #define CONFIG_SYS_DDR_MODE 0x04040242 |
| #define CONFIG_SYS_DDR_MODE2 0x00800000 |
| |
| /* Flash */ |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| |
| #define CONFIG_SYS_FLASH_BASE 0xFF800000 |
| #define CONFIG_SYS_FLASH_SIZE 8 |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 |
| |
| #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ |
| | BR_PS_16 \ |
| | BR_MS_GPCM \ |
| | BR_V) |
| #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ |
| | OR_UPM_XAM \ |
| | OR_GPCM_CSNT \ |
| | OR_GPCM_ACS_DIV2 \ |
| | OR_GPCM_XACS \ |
| | OR_GPCM_SCY_15 \ |
| | OR_GPCM_TRLX_SET \ |
| | OR_GPCM_EHTR_SET \ |
| | OR_GPCM_EAD) |
| #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) |
| |
| /* |
| * U-Boot memory configuration |
| */ |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| #undef CONFIG_SYS_RAMBOOT |
| |
| #define CONFIG_SYS_INIT_RAM_LOCK |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ |
| |
| #define CONFIG_SYS_GBL_DATA_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ |
| #define CONFIG_SYS_MONITOR_LEN (512 * 1024) |
| #define CONFIG_SYS_MALLOC_LEN (512 * 1024) |
| |
| /* |
| * Local Bus LCRR and LBCR regs |
| * LCRR: DLL bypass, Clock divider is 4 |
| * External Local Bus rate is |
| * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV |
| */ |
| #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP |
| #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 |
| #define CONFIG_SYS_LBC_LBCR 0x00000000 |
| |
| /* LB sdram refresh timer, about 6us */ |
| #define CONFIG_SYS_LBC_LSRT 0x32000000 |
| /* LB refresh timer prescal, 266MHz/32*/ |
| #define CONFIG_SYS_LBC_MRTPR 0x20000000 |
| |
| /* |
| * Serial Port |
| */ |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} |
| |
| #define CONFIG_CONSOLE ttyS0 |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) |
| #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) |
| |
| /* pass open firmware flat tree */ |
| #define CONFIG_OF_LIBFDT 1 |
| #define CONFIG_OF_BOARD_SETUP 1 |
| #define CONFIG_OF_STDOUT_VIA_ALIAS 1 |
| #define MV_DTB_NAME "mvblm7.dtb" |
| |
| /* |
| * PCI |
| */ |
| #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 |
| #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE |
| #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 |
| #define CONFIG_SYS_PCI1_MMIO_BASE \ |
| (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) |
| #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE |
| #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 |
| #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 |
| #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 |
| #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 |
| |
| #define CONFIG_NET_RETRY_COUNT 3 |
| |
| #define CONFIG_PCI_66M |
| #define CONFIG_83XX_CLKIN 66666667 |
| #define CONFIG_PCI_PNP |
| #define CONFIG_PCI_SCAN_SHOW |
| |
| /* TSEC */ |
| #define CONFIG_GMII |
| #define CONFIG_SYS_VSC8601_SKEWFIX |
| #define CONFIG_SYS_VSC8601_SKEW_TX 3 |
| #define CONFIG_SYS_VSC8601_SKEW_RX 3 |
| |
| #define CONFIG_TSEC1 |
| #define CONFIG_TSEC2 |
| |
| #define CONFIG_HAS_ETH0 |
| #define CONFIG_TSEC1_NAME "TSEC0" |
| #define CONFIG_FEC1_PHY_NORXERR |
| #define CONFIG_SYS_TSEC1_OFFSET 0x24000 |
| #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) |
| #define TSEC1_PHY_ADDR 0x10 |
| #define TSEC1_PHYIDX 0 |
| #define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) |
| |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_TSEC2_NAME "TSEC1" |
| #define CONFIG_FEC2_PHY_NORXERR |
| #define CONFIG_SYS_TSEC2_OFFSET 0x25000 |
| #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) |
| #define TSEC2_PHY_ADDR 0x11 |
| #define TSEC2_PHYIDX 0 |
| #define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) |
| |
| #define CONFIG_ETHPRIME "TSEC0" |
| |
| #define CONFIG_BOOTP_VENDOREX |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_DNS |
| #define CONFIG_BOOTP_DNS2 |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_NTPSERVER |
| #define CONFIG_BOOTP_RANDOM_DELAY |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_LIB_RAND |
| |
| /* USB */ |
| #define CONFIG_SYS_USB_HOST |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_FSL |
| #define CONFIG_HAS_FSL_DR_USB |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| |
| /* |
| * Environment |
| */ |
| #undef CONFIG_SYS_FLASH_PROTECTION |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_ADDR 0xFF800000 |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x2000 |
| #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE |
| |
| #define CONFIG_LOADS_ECHO |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_SDRAM |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_FPGA |
| #define CONFIG_CMD_FPGA_LOADMK |
| #define CONFIG_CMD_USB |
| #define CONFIG_DOS_PARTITION |
| |
| #undef CONFIG_WATCHDOG |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP |
| #define CONFIG_CMDLINE_EDITING |
| #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
| #define CONFIG_SYS_HUSH_PARSER |
| |
| /* default load address */ |
| #define CONFIG_SYS_LOAD_ADDR 0x2000000 |
| /* default location for tftp and bootm */ |
| #define CONFIG_LOADADDR 0x200000 |
| |
| #define CONFIG_SYS_PROMPT "mvBL-M7> " |
| #define CONFIG_SYS_CBSIZE 256 |
| |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 256 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| /* Initial Memory map for Linux*/ |
| #define CONFIG_SYS_BOOTMAPSZ (256 << 20) |
| |
| #define CONFIG_SYS_HRCW_LOW 0x0 |
| #define CONFIG_SYS_HRCW_HIGH 0x0 |
| |
| /* |
| * System performance |
| */ |
| #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ |
| #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ |
| #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ |
| #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ |
| |
| /* clocking */ |
| #define CONFIG_SYS_SCCR_ENCCM 0 |
| #define CONFIG_SYS_SCCR_USBMPHCM 0 |
| #define CONFIG_SYS_SCCR_USBDRCM 2 |
| #define CONFIG_SYS_SCCR_TSEC1CM 1 |
| #define CONFIG_SYS_SCCR_TSEC2CM 1 |
| |
| #define CONFIG_SYS_SICRH 0x1fef0003 |
| #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) |
| |
| #define CONFIG_SYS_HID0_INIT 0x000000000 |
| #define CONFIG_SYS_HID0_FINAL (CONFIG_SYS_HID0_INIT | \ |
| HID0_ENABLE_INSTRUCTION_CACHE) |
| |
| #define CONFIG_SYS_HID2 HID2_HBE |
| #define CONFIG_HIGH_BATS 1 |
| |
| /* DDR */ |
| #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ |
| | BATL_PP_RW \ |
| | BATL_MEMCOHERENCE) |
| #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ |
| | BATU_BL_256M \ |
| | BATU_VS \ |
| | BATU_VP) |
| |
| /* PCI */ |
| #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ |
| | BATL_PP_RW \ |
| | BATL_MEMCOHERENCE) |
| #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ |
| | BATU_BL_256M \ |
| | BATU_VS \ |
| | BATU_VP) |
| #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ |
| | BATL_PP_RW \ |
| | BATL_CACHEINHIBIT \ |
| | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ |
| | BATU_BL_256M \ |
| | BATU_VS \ |
| | BATU_VP) |
| |
| /* no PCI2 */ |
| #define CONFIG_SYS_IBAT3L 0 |
| #define CONFIG_SYS_IBAT3U 0 |
| #define CONFIG_SYS_IBAT4L 0 |
| #define CONFIG_SYS_IBAT4U 0 |
| |
| /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ |
| #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ |
| | BATL_PP_RW \ |
| | BATL_CACHEINHIBIT \ |
| | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ |
| | BATU_BL_256M \ |
| | BATU_VS \ |
| | BATU_VP) |
| |
| /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */ |
| #define CONFIG_SYS_IBAT6L (0xF0000000 \ |
| | BATL_PP_RW \ |
| | BATL_MEMCOHERENCE \ |
| | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_IBAT6U (0xF0000000 \ |
| | BATU_BL_256M \ |
| | BATU_VS \ |
| | BATU_VP) |
| #define CONFIG_SYS_IBAT7L 0 |
| #define CONFIG_SYS_IBAT7U 0 |
| |
| #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L |
| #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U |
| #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U |
| #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L |
| #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U |
| #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L |
| #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U |
| #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L |
| #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U |
| #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L |
| #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U |
| #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L |
| #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U |
| #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L |
| #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U |
| |
| /* |
| * Environment Configuration |
| */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_NETDEV eth0 |
| |
| /* Default path and filenames */ |
| #define CONFIG_BOOTDELAY 5 |
| #define CONFIG_AUTOBOOT_KEYED |
| #define CONFIG_AUTOBOOT_STOP_STR "s" |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| #define CONFIG_RESET_TO_RETRY 1000 |
| |
| #define MV_CI "mvBL-M7" |
| #define MV_VCI "mvBL-M7" |
| #define MV_FPGA_DATA 0xfff40000 |
| #define MV_FPGA_SIZE 0 |
| #define MV_KERNEL_ADDR 0xff810000 |
| #define MV_INITRD_ADDR 0xffb00000 |
| #define MV_SCRIPT_ADDR 0xff804000 |
| #define MV_SCRIPT_ADDR2 0xff806000 |
| #define MV_DTB_ADDR 0xff808000 |
| #define MV_INITRD_LENGTH 0x00400000 |
| |
| #define CONFIG_SHOW_BOOT_PROGRESS 1 |
| |
| #define MV_KERNEL_ADDR_RAM 0x00100000 |
| #define MV_DTB_ADDR_RAM 0x00600000 |
| #define MV_INITRD_ADDR_RAM 0x01000000 |
| |
| #define CONFIG_BOOTCOMMAND "if imi ${script_addr}; " \ |
| "then source ${script_addr}; " \ |
| "else source ${script_addr2}; " \ |
| "fi;" |
| #define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "console_nr=0\0" \ |
| "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" \ |
| "stdin=serial\0" \ |
| "stdout=serial\0" \ |
| "stderr=serial\0" \ |
| "fpga=0\0" \ |
| "fpgadata=" __stringify(MV_FPGA_DATA) "\0" \ |
| "fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0" \ |
| "script_addr=" __stringify(MV_SCRIPT_ADDR) "\0" \ |
| "script_addr2=" __stringify(MV_SCRIPT_ADDR2) "\0" \ |
| "mv_kernel_addr=" __stringify(MV_KERNEL_ADDR) "\0" \ |
| "mv_kernel_addr_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0" \ |
| "mv_initrd_addr=" __stringify(MV_INITRD_ADDR) "\0" \ |
| "mv_initrd_addr_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0" \ |
| "mv_initrd_length=" __stringify(MV_INITRD_LENGTH) "\0" \ |
| "mv_dtb_addr=" __stringify(MV_DTB_ADDR) "\0" \ |
| "mv_dtb_addr_ram=" __stringify(MV_DTB_ADDR_RAM) "\0" \ |
| "dtb_name=" __stringify(MV_DTB_NAME) "\0" \ |
| "mv_version=" U_BOOT_VERSION "\0" \ |
| "dhcp_client_id=" MV_CI "\0" \ |
| "dhcp_vendor-class-identifier=" MV_VCI "\0" \ |
| "netretry=no\0" \ |
| "use_static_ipaddr=no\0" \ |
| "static_ipaddr=192.168.90.10\0" \ |
| "static_netmask=255.255.255.0\0" \ |
| "static_gateway=0.0.0.0\0" \ |
| "initrd_name=uInitrd.mvBL-M7-rfs\0" \ |
| "zcip=no\0" \ |
| "netboot=yes\0" \ |
| "mvtest=Ff\0" \ |
| "tried_bootfromflash=no\0" \ |
| "tried_bootfromnet=no\0" \ |
| "bootfile=mvblm72625.boot\0" \ |
| "use_dhcp=yes\0" \ |
| "gev_start=yes\0" \ |
| "mvbcdma_debug=0\0" \ |
| "mvbcia_debug=0\0" \ |
| "propdev_debug=0\0" \ |
| "gevss_debug=0\0" \ |
| "watchdog=0\0" \ |
| "usb_dr_mode=host\0" \ |
| "sensor_cnt=2\0" \ |
| "" |
| |
| #define CONFIG_FPGA_COUNT 1 |
| #define CONFIG_FPGA |
| #define CONFIG_FPGA_ALTERA |
| #define CONFIG_FPGA_CYCLON2 |
| |
| #endif |