blob: bfe559f6e2cd4dba194c193cb4147bb75356d406 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+
*
* Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd.
* (http://www.friendlyarm.com)
*
* (C) Copyright 2016 Nexell
* Hyejung Kwon <cjscld15@nexell.co.kr>
*
* Copyright (C) 2019 Stefan Bosch <stefan_b@posteo.net>
*/
#ifndef __CONFIG_H__
#define __CONFIG_H__
#include <linux/sizes.h>
#include <asm/arch/nexell.h>
/*-----------------------------------------------------------------------
* System memory Configuration
*/
#define CFG_SYS_SDRAM_BASE 0x71000000
/*
* "(0x40000000 - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in
* u-boot nanopi2-v2016.01.
* This is not working anymore because boot_fdt_add_mem_rsv_regions() in
* common/image-fdt.c has been extended:
* Also reserved-memory sections are marked as unusable.
*
* In friendlyArm Ubuntu 16.04 source arch/arm/boot/dts/s5p4418.dtsi:
* reserved-memory {
* #address-cells = <1>;
* #size-cells = <1>;
* ranges;
*
* secure_memory@b0000000 {
* reg = <0xB0000000 0x1000000>;
* nop-map;
* };
* };
*
* arch_lmb_reserve() of arch/arm/lib/bootm.c:
* "Allocate space for command line and board info - ... below the current
* stack pointer."
* --> Memory allocated would overlap with "secure_memory@b0000000"
* --> lmb_add_region(rgn, base==0xb0000000, size==0x1000000) fails,
* boot output:
* ...
* Kernel image @ 0x71080000 [ 0x000000 - 0x60e628 ]
* ## Flattened Device Tree blob at 7a000000
* Booting using the fdt blob at 0x7a000000
* ERROR: reserving fdt memory region failed (addr=b0000000 size=1000000)
* Using Device Tree in place at 7a000000, end 7a00fbf0
*
* Starting kernel ...
* ...
*/
#define CFG_SYS_SDRAM_SIZE (0xb0000000 - CFG_SYS_SDRAM_BASE)
#define BMP_LOAD_ADDR 0x78000000
/* kernel load address */
#define INITRD_START 0x79000000
#define KERNEL_DTB_ADDR 0x7A000000
/*-----------------------------------------------------------------------
* High Level System Configuration
*/
/* decrementer freq: 1ms ticks */
/*-----------------------------------------------------------------------
* System initialize options (board_init_f)
*/
/* board_init_f->init_sequence, call arch_cpu_init */
/*-----------------------------------------------------------------------
* serial console configuration
*/
#define CONFIG_PL011_CLOCK 50000000
#define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \
(void *)PHY_BASEADDR_UART1, \
(void *)PHY_BASEADDR_UART2, \
(void *)PHY_BASEADDR_UART3}
/*-----------------------------------------------------------------------
* BACKLIGHT
*/
#ifndef CONFIG_S5P4418_ONEWIRE
#ifdef CONFIG_PWM_NX
/* fallback to pwm */
#define BACKLIGHT_CH 0
#define BACKLIGHT_DIV 0
#define BACKLIGHT_INV 0
#define BACKLIGHT_DUTY 50
#define BACKLIGHT_HZ 1000
#endif
#endif
/*-----------------------------------------------------------------------
* VIDEO
*/
#ifdef CONFIG_VIDEO_LOGO
#ifdef CONFIG_SPLASH_SCREEN
#define SPLASH_FILE logo.bmp
#endif
#endif
/*-----------------------------------------------------------------------
* ENV
*/
#define BLOADER_MMC \
"ext4load mmc ${rootdev}:${bootpart} "
#ifdef CONFIG_OF_BOARD_SETUP
#define EXTRA_ENV_DTB_RESERVE \
"dtb_reserve=" \
"if test -n \"$dtb_addr\"; then fdt addr $dtb_addr; fi\0"
#else
#define EXTRA_ENV_DTB_RESERVE \
"dtb_reserve=" \
"if test -n \"$fb_addr\"; then " \
"fdt addr $dtb_addr;" \
"fdt resize;" \
"fdt mk /reserved-memory display_reserved;" \
"fdt set /reserved-memory/display_reserved " \
"reg <$fb_addr 0x800000>;" \
"fi;\0"
#endif
#ifdef CONFIG_SPLASH_SCREEN
#define EXTRA_ENV_BOOT_LOGO \
"splashimage=" __stringify(BMP_LOAD_ADDR)"\0" \
"splashfile=" __stringify(SPLASH_FILE)"\0" \
"splashpos=m,m\0" \
"fb_addr=\0" \
EXTRA_ENV_DTB_RESERVE
#else
#define EXTRA_ENV_BOOT_LOGO EXTRA_ENV_DTB_RESERVE
#endif
#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
"rootpart=" __stringify(CONFIG_ROOT_PART) "\0" \
"bootpart=" __stringify(CONFIG_BOOT_PART) "\0" \
"kernel=zImage\0" \
"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"dtb_name=s5p4418-nanopi2-rev01.dtb\0" \
"dtb_addr=" __stringify(KERNEL_DTB_ADDR) "\0" \
"initrd_name=ramdisk.img\0" \
"initrd_addr=" __stringify(INITRD_START) "\0" \
"initrd_size=0x600000\0" \
"load_dtb=" \
BLOADER_MMC "${dtb_addr} ${dtb_name}; " \
"run dtb_reserve\0" \
"load_kernel=" \
BLOADER_MMC "${loadaddr} ${kernel}\0" \
"load_initrd=" \
BLOADER_MMC "${initrd_addr} ${initrd_name}; " \
"setenv initrd_size 0x${filesize}\0" \
"mmcboot=" \
"run load_kernel; run load_initrd; run load_dtb; " \
"bootz ${loadaddr} ${initrd_addr}:${initrd_size} " \
"${dtb_addr}\0" \
"bootcmd=run mmcboot\0" \
EXTRA_ENV_BOOT_LOGO
#endif /* __CONFIG_H__ */