| /* |
| * (C) Copyright 2000 |
| * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /*************** DEFINES for Intel StrataFlash FLASH chip ********************/ |
| |
| /* Commands */ |
| #define ISF_CMD_RST 0xFF /* reset flash */ |
| #define ISF_CMD_RD_ID 0x90 /* read the id and lock bits */ |
| #define ISF_CMD_RD_QUERY 0x98 /* read device capabilities */ |
| #define ISF_CMD_RD_STAT 0x70 /* read the status register */ |
| #define ISF_CMD_CLR_STAT 0x50 /* clear the staus register */ |
| #define ISF_CMD_WR_BUF 0xE8 /* clear the staus register */ |
| #define ISF_CMD_PROG 0x40 /* program word command */ |
| #define ISF_CMD_ERASE1 0x20 /* 1st word for block erase */ |
| #define ISF_CMD_ERASE2 0xD0 /* 2nd word for block erase */ |
| #define ISF_CMD_ERASE_SUSP 0xB0 /* suspend block erase */ |
| #define ISF_CMD_LOCK 0x60 /* 1st word for all lock cmds */ |
| #define ISF_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */ |
| #define ISF_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */ |
| #define ISF_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */ |
| |
| /* status register bits */ |
| #define ISF_STAT_DPS 0x02 /* Device Protect Status */ |
| #define ISF_STAT_VPPS 0x08 /* VPP Status */ |
| #define ISF_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */ |
| #define ISF_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */ |
| #define ISF_STAT_ESS 0x40 /* Erase Suspend Status */ |
| #define ISF_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */ |
| |
| #define ISF_STAT_ERR (ISF_STAT_VPPS | ISF_STAT_DPS | \ |
| ISF_STAT_ECLBS | ISF_STAT_PSLBS) |
| |
| /* register addresses, valid only following an ISF_CMD_RD_ID command */ |
| #define ISF_REG_MAN_CODE 0x00 /* manufacturer code */ |
| #define ISF_REG_DEV_CODE 0x01 /* device code */ |
| #define ISF_REG_BLK_LCK 0x02 /* block lock configuration */ |
| #define ISF_REG_MST_LCK 0x03 /* master lock configuration */ |
| |
| /********************** DEFINES for Hymod Flash ******************************/ |
| |
| /* |
| * this code requires that the flash on any Hymod board appear as a bank |
| * of two (identical) 16bit Intel StrataFlash chips with 64Kword erase |
| * sectors (or blocks), running in x16 bit mode and connected side-by-side |
| * to make a 32-bit wide bus. |
| */ |
| |
| typedef unsigned long bank_word_t; |
| typedef bank_word_t bank_blk_t[64 * 1024]; |
| |
| #define BANK_FILL_WORD(b) (((bank_word_t)(b) << 16) | (bank_word_t)(b)) |
| |
| #ifdef EXAMPLE |
| |
| /* theoretically the following examples should also work */ |
| |
| /* one flash chip in x8 mode with 128Kword sectors and 8bit bus */ |
| typedef unsigned char bank_word_t; |
| typedef bank_word_t bank_blk_t[128 * 1024]; |
| #define BANK_FILL_WORD(b) ((bank_word_t)(b)) |
| |
| /* four flash chips in x16 mode with 32Kword sectors and 64bit bus */ |
| typedef unsigned long long bank_word_t; |
| typedef bank_word_t bank_blk_t[32 * 1024]; |
| #define BANK_FILL_WORD(b) ( \ |
| ((bank_word_t)(b) << 48) \ |
| ((bank_word_t)(b) << 32) \ |
| ((bank_word_t)(b) << 16) \ |
| ((bank_word_t)(b) << 0) \ |
| ) |
| |
| #endif /* EXAMPLE */ |
| |
| /* the sizes of these two types should probably be the same */ |
| typedef bank_word_t *bank_addr_t; |
| typedef unsigned long bank_size_t; |
| |
| /* align bank addresses and sizes to bank word boundaries */ |
| #define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ |
| & ~(sizeof (bank_word_t) - 1))) |
| #define BANK_SIZE_WORD_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_word_t) - 1) \ |
| & ~(sizeof (bank_word_t) - 1)) |
| |
| /* align bank addresses and sizes to bank block boundaries */ |
| #define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ |
| & ~(sizeof (bank_blk_t) - 1))) |
| #define BANK_SIZE_BLK_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_blk_t) - 1) \ |
| & ~(sizeof (bank_blk_t) - 1)) |
| |
| /* add an offset to a bank address */ |
| #define BANK_ADDR_OFFSET(a, o) ((bank_addr_t)((bank_size_t)(a) + \ |
| (bank_size_t)(o))) |
| |
| /* adjust a bank address to start of next word, block or bank */ |
| #define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \ |
| sizeof (bank_word_t)) |
| #define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \ |
| sizeof (bank_blk_t)) |
| |
| /* get bank address of register r given a bank base address a and block num b */ |
| #define BANK_ADDR_REG(a, b, r) BANK_ADDR_OFFSET(BANK_ADDR_OFFSET((a), \ |
| (bank_size_t)(b) * sizeof (bank_blk_t)), \ |
| (bank_size_t)(r) * sizeof (bank_word_t)) |
| |
| /* make a bank word value for each StrataFlash value */ |
| |
| /* Commands */ |
| #define BANK_CMD_RST BANK_FILL_WORD(ISF_CMD_RST) |
| #define BANK_CMD_RD_ID BANK_FILL_WORD(ISF_CMD_RD_ID) |
| #define BANK_CMD_RD_STAT BANK_FILL_WORD(ISF_CMD_RD_STAT) |
| #define BANK_CMD_CLR_STAT BANK_FILL_WORD(ISF_CMD_CLR_STAT) |
| #define BANK_CMD_ERASE1 BANK_FILL_WORD(ISF_CMD_ERASE1) |
| #define BANK_CMD_ERASE2 BANK_FILL_WORD(ISF_CMD_ERASE2) |
| #define BANK_CMD_PROG BANK_FILL_WORD(ISF_CMD_PROG) |
| #define BANK_CMD_LOCK BANK_FILL_WORD(ISF_CMD_LOCK) |
| #define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(ISF_CMD_SET_LOCK_BLK) |
| #define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(ISF_CMD_SET_LOCK_MSTR) |
| #define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(ISF_CMD_CLR_LOCK_BLK) |
| |
| /* status register bits */ |
| #define BANK_STAT_DPS BANK_FILL_WORD(ISF_STAT_DPS) |
| #define BANK_STAT_PSS BANK_FILL_WORD(ISF_STAT_PSS) |
| #define BANK_STAT_VPPS BANK_FILL_WORD(ISF_STAT_VPPS) |
| #define BANK_STAT_PSLBS BANK_FILL_WORD(ISF_STAT_PSLBS) |
| #define BANK_STAT_ECLBS BANK_FILL_WORD(ISF_STAT_ECLBS) |
| #define BANK_STAT_ESS BANK_FILL_WORD(ISF_STAT_ESS) |
| #define BANK_STAT_RDY BANK_FILL_WORD(ISF_STAT_RDY) |
| |
| #define BANK_STAT_ERR BANK_FILL_WORD(ISF_STAT_ERR) |
| |
| /* make a bank register address for each StrataFlash register address */ |
| |
| #define BANK_REG_MAN_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_MAN_CODE) |
| #define BANK_REG_DEV_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_DEV_CODE) |
| #define BANK_REG_BLK_LCK(a, b) BANK_ADDR_REG((a), (b), ISF_REG_BLK_LCK) |
| #define BANK_REG_MST_LCK(a) BANK_ADDR_REG((a), 0, ISF_REG_MST_LCK) |