| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00 |
| */ |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| #include <galileo/gt64260R.h> |
| #include <galileo/memory.h> |
| #include "intel_flash.h" |
| |
| |
| /*----------------------------------------------------------------------- |
| * Protection Flags: |
| */ |
| #define FLAG_PROTECT_SET 0x01 |
| #define FLAG_PROTECT_CLEAR 0x02 |
| |
| static void |
| bank_reset(flash_info_t *info, int sect) |
| { |
| bank_addr_t addrw, eaddrw; |
| |
| addrw = (bank_addr_t)info->start[sect]; |
| eaddrw = BANK_ADDR_NEXT_WORD(addrw); |
| |
| while (addrw < eaddrw) { |
| #ifdef FLASH_DEBUG |
| printf(" writing reset cmd to addr 0x%08lx\n", |
| (unsigned long)addrw); |
| #endif |
| *addrw = BANK_CMD_RST; |
| addrw++; |
| } |
| } |
| |
| static void |
| bank_erase_init(flash_info_t *info, int sect) |
| { |
| bank_addr_t addrw, saddrw, eaddrw; |
| int flag; |
| |
| #ifdef FLASH_DEBUG |
| printf("0x%08x BANK_CMD_PROG\n", BANK_CMD_PROG); |
| printf("0x%08x BANK_CMD_ERASE1\n", BANK_CMD_ERASE1); |
| printf("0x%08x BANK_CMD_ERASE2\n", BANK_CMD_ERASE2); |
| printf("0x%08x BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT); |
| printf("0x%08x BANK_CMD_RST\n", BANK_CMD_RST); |
| printf("0x%08x BANK_STAT_RDY\n", BANK_STAT_RDY); |
| printf("0x%08x BANK_STAT_ERR\n", BANK_STAT_ERR); |
| #endif |
| |
| saddrw = (bank_addr_t)info->start[sect]; |
| eaddrw = BANK_ADDR_NEXT_WORD(saddrw); |
| |
| #ifdef FLASH_DEBUG |
| printf("erasing sector %d, start addr = 0x%08lx " |
| "(bank next word addr = 0x%08lx)\n", sect, |
| (unsigned long)saddrw, (unsigned long)eaddrw); |
| #endif |
| |
| /* Disable intrs which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| for (addrw = saddrw; addrw < eaddrw; addrw++) { |
| #ifdef FLASH_DEBUG |
| printf(" writing erase cmd to addr 0x%08lx\n", |
| (unsigned long)addrw); |
| #endif |
| *addrw = BANK_CMD_ERASE1; |
| *addrw = BANK_CMD_ERASE2; |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| } |
| |
| static int |
| bank_erase_poll(flash_info_t *info, int sect) |
| { |
| bank_addr_t addrw, saddrw, eaddrw; |
| int sectdone, haderr; |
| |
| saddrw = (bank_addr_t)info->start[sect]; |
| eaddrw = BANK_ADDR_NEXT_WORD(saddrw); |
| |
| sectdone = 1; |
| haderr = 0; |
| |
| for (addrw = saddrw; addrw < eaddrw; addrw++) { |
| bank_word_t stat = *addrw; |
| |
| #ifdef FLASH_DEBUG |
| printf(" checking status at addr " |
| "0x%08x [0x%08x]\n", |
| (unsigned long)addrw, stat); |
| #endif |
| if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY) |
| sectdone = 0; |
| else if ((stat & BANK_STAT_ERR) != 0) { |
| printf(" failed on sector %d " |
| "(stat = 0x%08x) at " |
| "address 0x%p\n", |
| sect, stat, addrw); |
| *addrw = BANK_CMD_CLR_STAT; |
| haderr = 1; |
| } |
| } |
| |
| if (haderr) |
| return (-1); |
| else |
| return (sectdone); |
| } |
| |
| int |
| write_word_intel(bank_addr_t addr, bank_word_t value) |
| { |
| bank_word_t stat; |
| ulong start; |
| int flag, retval; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| *addr = BANK_CMD_PROG; |
| |
| *addr = value; |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| retval = 0; |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| do { |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| retval = 1; |
| goto done; |
| } |
| stat = *addr; |
| } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY); |
| |
| if ((stat & BANK_STAT_ERR) != 0) { |
| printf("flash program failed (stat = 0x%08lx) " |
| "at address 0x%08lx\n", (ulong)stat, (ulong)addr); |
| *addr = BANK_CMD_CLR_STAT; |
| retval = 3; |
| } |
| |
| done: |
| /* reset to read mode */ |
| *addr = BANK_CMD_RST; |
| |
| return (retval); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int |
| flash_erase_intel(flash_info_t *info, int s_first, int s_last) |
| { |
| int prot, sect, haderr; |
| ulong start, now, last; |
| |
| #ifdef FLASH_DEBUG |
| printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n" |
| " Bank # %d: ", s_last - s_first + 1, s_first, s_last, |
| (info - flash_info) + 1); |
| flash_print_info(info); |
| #endif |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf("- Warning: %d protected sector%s will not be erased!\n", |
| prot, (prot > 1 ? "s" : "")); |
| } |
| |
| start = get_timer (0); |
| last = 0; |
| haderr = 0; |
| |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| ulong estart; |
| int sectdone; |
| |
| bank_erase_init(info, sect); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay (1000); |
| |
| estart = get_timer(start); |
| |
| do { |
| now = get_timer(start); |
| |
| if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf ("Timeout (sect %d)\n", sect); |
| haderr = 1; |
| break; |
| } |
| |
| #ifndef FLASH_DEBUG |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc ('.'); |
| last = now; |
| } |
| #endif |
| |
| sectdone = bank_erase_poll(info, sect); |
| |
| if (sectdone < 0) { |
| haderr = 1; |
| break; |
| } |
| |
| } while (!sectdone); |
| |
| if (haderr) |
| break; |
| } |
| } |
| |
| if (haderr > 0) |
| printf (" failed\n"); |
| else |
| printf (" done\n"); |
| |
| /* reset to read mode */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| bank_reset(info, sect); |
| } |
| } |
| return haderr; |
| } |