blob: 76ae1b675fec9de008832b7d9f46c6b6f86cd0f5 [file] [log] [blame]
/*
* boot-common.c
*
* Common bootmode functions for omap based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*/
#include <common.h>
#include <spl.h>
#include <asm/omap_common.h>
#include <asm/arch/omap.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
void save_omap_boot_params(void)
{
u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
u8 boot_device;
u32 dev_desc, dev_data;
if ((rom_params < NON_SECURE_SRAM_START) ||
(rom_params > NON_SECURE_SRAM_END))
return;
/*
* rom_params can be type casted to omap_boot_parameters and
* used. But it not correct to assume that romcode structure
* encoding would be same as u-boot. So use the defined offsets.
*/
gd->arch.omap_boot_params.omap_bootdevice = boot_device =
*((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
gd->arch.omap_boot_params.ch_flags =
*((u8 *)(rom_params + CH_FLAGS_OFFSET));
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX)
if ((omap_hw_init_context() ==
OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
gd->arch.omap_boot_params.omap_bootmode =
*((u8 *)(rom_params + BOOT_MODE_OFFSET));
} else
#endif
{
dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
gd->arch.omap_boot_params.omap_bootmode =
*((u32 *)(dev_data + BOOT_MODE_OFFSET));
}
}
}
#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
}
u32 spl_boot_mode(void)
{
return gd->arch.omap_boot_params.omap_bootmode;
}
void spl_board_init(void)
{
#ifdef CONFIG_SPL_NAND_SUPPORT
gpmc_init();
#endif
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
arch_misc_init();
#endif
}
int board_mmc_init(bd_t *bis)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
omap_mmc_init(0, 0, 0, -1, -1);
break;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
omap_mmc_init(1, 0, 0, -1, -1);
break;
}
return 0;
}
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
debug("image entry point: 0x%X\n", spl_image->entry_point);
/* Pass the saved boot_params from rom code */
image_entry((u32 *)&gd->arch.omap_boot_params);
}
#endif