| /* |
| * Balloon3 configuration file |
| * |
| * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Board Configuration Options |
| */ |
| #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ |
| #define CONFIG_BALLOON3 1 /* Balloon3 board */ |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_SYS_MALLOC_LEN (128*1024) |
| #define CONFIG_ARCH_CPU_INIT |
| #define CONFIG_BOOTCOMMAND \ |
| "fpga load 0x0 0x50000 0x62638; " \ |
| "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ |
| "bootm 0xa4000000; " \ |
| "fi; " \ |
| "bootm 0xd0000;" |
| #define CONFIG_BOOTARGS "console=tty0 console=ttyS2,115200" |
| #define CONFIG_TIMESTAMP |
| #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_SYS_TEXT_BASE 0x0 |
| #define CONFIG_LZMA /* LZMA compression support */ |
| |
| /* |
| * Serial Console Configuration |
| */ |
| #define CONFIG_PXA_SERIAL |
| #define CONFIG_STUART 1 |
| #define CONFIG_CONS_INDEX 2 |
| #define CONFIG_BAUDRATE 115200 |
| |
| /* |
| * Bootloader Components Configuration |
| */ |
| #undef CONFIG_CMD_ENV |
| #define CONFIG_CMD_USB |
| #define CONFIG_CMD_FPGA_LOADMK |
| #undef CONFIG_LCD |
| |
| /* |
| * KGDB |
| */ |
| #ifdef CONFIG_CMD_KGDB |
| #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ |
| #endif |
| |
| /* |
| * HUSH Shell Configuration |
| */ |
| #define CONFIG_SYS_HUSH_PARSER 1 |
| |
| #define CONFIG_SYS_LONGHELP |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT "$ " |
| #else |
| #endif |
| #define CONFIG_SYS_CBSIZE 256 |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| #define CONFIG_SYS_DEVICE_NULLDEV 1 |
| |
| /* |
| * Clock Configuration |
| */ |
| #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ |
| |
| /* |
| * DRAM Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */ |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ |
| #define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */ |
| #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ |
| #define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */ |
| #define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */ |
| |
| #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ |
| #define CONFIG_SYS_DRAM_SIZE 0x18000000 /* 384 MB DRAM */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0xa1000000 |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048) |
| |
| /* |
| * NOR FLASH |
| */ |
| #ifdef CONFIG_CMD_FLASH |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 |
| |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 240000 |
| #define CONFIG_SYS_FLASH_LOCK_TOUT 240000 |
| #define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 |
| #define CONFIG_SYS_FLASH_PROTECTION |
| #define CONFIG_ENV_IS_IN_FLASH |
| #else |
| #define CONFIG_SYS_NO_FLASH |
| #define CONFIG_ENV_IS_NOWHERE |
| #endif |
| |
| #define CONFIG_SYS_MONITOR_BASE 0x000000 |
| #define CONFIG_SYS_MONITOR_LEN 0x40000 |
| |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_ADDR 0x40000 |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| |
| /* |
| * GPIO settings |
| */ |
| #define CONFIG_SYS_GPSR0_VAL 0x307dc7fd |
| #define CONFIG_SYS_GPSR1_VAL 0x03cffa4e |
| #define CONFIG_SYS_GPSR2_VAL 0x7131c000 |
| #define CONFIG_SYS_GPSR3_VAL 0x01e1f3ff |
| |
| #define CONFIG_SYS_GPCR0_VAL 0x0 |
| #define CONFIG_SYS_GPCR1_VAL 0x0 |
| #define CONFIG_SYS_GPCR2_VAL 0x0 |
| #define CONFIG_SYS_GPCR3_VAL 0x0 |
| |
| #define CONFIG_SYS_GPDR0_VAL 0xc0f98e02 |
| #define CONFIG_SYS_GPDR1_VAL 0xfcffa8b7 |
| #define CONFIG_SYS_GPDR2_VAL 0x22e3ffff |
| #define CONFIG_SYS_GPDR3_VAL 0x000201fe |
| |
| #define CONFIG_SYS_GAFR0_L_VAL 0x96c00000 |
| #define CONFIG_SYS_GAFR0_U_VAL 0xa5e5459b |
| #define CONFIG_SYS_GAFR1_L_VAL 0x699b759a |
| #define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a5aa |
| #define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa |
| #define CONFIG_SYS_GAFR2_U_VAL 0x01f9a6aa |
| #define CONFIG_SYS_GAFR3_L_VAL 0x54510003 |
| #define CONFIG_SYS_GAFR3_U_VAL 0x00001599 |
| |
| #define CONFIG_SYS_PSSR_VAL 0x30 |
| |
| /* |
| * Clock settings |
| */ |
| #define CONFIG_SYS_CKEN 0xffffffff |
| #define CONFIG_SYS_CCCR 0x00000290 |
| |
| /* |
| * Memory settings |
| */ |
| #define CONFIG_SYS_MSC0_VAL 0x7ff07ff8 |
| #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 |
| #define CONFIG_SYS_MSC2_VAL 0x74a42491 |
| #define CONFIG_SYS_MDCNFG_VAL 0x89d309d3 |
| #define CONFIG_SYS_MDREFR_VAL 0x001d8018 |
| #define CONFIG_SYS_MDMRS_VAL 0x00220022 |
| #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 |
| #define CONFIG_SYS_SXCNFG_VAL 0x00000000 |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| #define CONFIG_SYS_MECR_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM0_VAL 0x00014307 |
| #define CONFIG_SYS_MCMEM1_VAL 0x00014307 |
| #define CONFIG_SYS_MCATT0_VAL 0x0001c787 |
| #define CONFIG_SYS_MCATT1_VAL 0x0001c787 |
| #define CONFIG_SYS_MCIO0_VAL 0x0001430f |
| #define CONFIG_SYS_MCIO1_VAL 0x0001430f |
| |
| /* |
| * LCD |
| */ |
| #ifdef CONFIG_LCD |
| #define CONFIG_BALLOON3LCD |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_CMD_BMP |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_SPLASH_SCREEN_ALIGN |
| #define CONFIG_VIDEO_BMP_GZIP |
| #define CONFIG_VIDEO_BMP_RLE8 |
| #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) |
| #endif |
| |
| /* |
| * USB |
| */ |
| #ifdef CONFIG_CMD_USB |
| #define CONFIG_USB_OHCI_NEW |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT |
| #define CONFIG_SYS_USB_OHCI_BOARD_INIT |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "balloon3" |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_EXT2 |
| #endif |
| |
| /* |
| * FPGA |
| */ |
| #ifdef CONFIG_CMD_FPGA |
| #define CONFIG_FPGA |
| #define CONFIG_FPGA_XILINX |
| #define CONFIG_FPGA_SPARTAN3 |
| #define CONFIG_SYS_FPGA_PROG_FEEDBACK |
| #define CONFIG_SYS_FPGA_WAIT 1000 |
| #define CONFIG_MAX_FPGA_DEVICES 1 |
| #endif |
| |
| #endif /* __CONFIG_H */ |