| /* |
| * (C) Copyright 2007 |
| * Developed for DENX Software Engineering GmbH. |
| * |
| * Author: Pavel Kolesnikov <concord@emcraft.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* define DEBUG for debugging output (obviously ;-)) */ |
| #if 0 |
| #define DEBUG |
| #endif |
| |
| #include <common.h> |
| #include <watchdog.h> |
| |
| #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) |
| |
| #include <post.h> |
| |
| #if CONFIG_POST & CONFIG_SYS_POST_ECC |
| |
| /* |
| * MEMORY ECC test |
| * |
| * This test performs the checks ECC facility of memory. |
| */ |
| #include <asm/processor.h> |
| #include <asm/mmu.h> |
| #include <asm/io.h> |
| #include <asm/ppc440.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| const static uint8_t syndrome_codes[] = { |
| 0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3, |
| 0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB, |
| 0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2, |
| 0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A, |
| 0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62, |
| 0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A, |
| 0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23, |
| 0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B, |
| 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01 |
| }; |
| |
| #define ECC_START_ADDR 0x10 |
| #define ECC_STOP_ADDR 0x2000 |
| #define ECC_PATTERN 0x01010101 |
| #define ECC_PATTERN_CORR 0x11010101 |
| #define ECC_PATTERN_UNCORR 0x61010101 |
| |
| inline static void disable_ecc(void) |
| { |
| uint32_t value; |
| |
| sync(); /* Wait for any pending memory accesses to complete. */ |
| mfsdram(DDR0_22, value); |
| mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK) |
| | DDR0_22_CTRL_RAW_ECC_DISABLE); |
| } |
| |
| inline static void clear_and_enable_ecc(void) |
| { |
| uint32_t value; |
| |
| sync(); /* Wait for any pending memory accesses to complete. */ |
| mfsdram(DDR0_00, value); |
| mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL); |
| mfsdram(DDR0_22, value); |
| mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK) |
| | DDR0_22_CTRL_RAW_ECC_ENABLE); |
| } |
| |
| static uint32_t get_ecc_status(void) |
| { |
| uint32_t int_status; |
| #if defined(DEBUG) |
| uint8_t syndrome; |
| uint32_t hdata, ldata, haddr, laddr; |
| uint32_t value; |
| #endif |
| |
| mfsdram(DDR0_00, int_status); |
| int_status &= DDR0_00_INT_STATUS_MASK; |
| |
| #if defined(DEBUG) |
| if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) { |
| mfsdram(DDR0_32, laddr); |
| mfsdram(DDR0_33, haddr); |
| haddr &= 0x00000001; |
| if (int_status & DDR0_00_INT_STATUS_BIT1) |
| debug("Multiple accesses"); |
| else |
| debug("A single access"); |
| |
| debug(" outside the defined physical memory space detected\n" |
| " addr = 0x%01x%08x\n", haddr, laddr); |
| } |
| if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) { |
| unsigned int bit; |
| |
| mfsdram(DDR0_23, value); |
| syndrome = (value >> 16) & 0xff; |
| for (bit = 0; bit < sizeof(syndrome_codes); bit++) |
| if (syndrome_codes[bit] == syndrome) |
| break; |
| |
| mfsdram(DDR0_38, laddr); |
| mfsdram(DDR0_39, haddr); |
| haddr &= 0x00000001; |
| mfsdram(DDR0_40, ldata); |
| mfsdram(DDR0_41, hdata); |
| if (int_status & DDR0_00_INT_STATUS_BIT3) |
| debug("Multiple correctable ECC events"); |
| else |
| debug("Single correctable ECC event"); |
| |
| debug(" detected\n 0x%01x%08x - 0x%08x%08x, bit - %d\n", |
| haddr, laddr, hdata, ldata, bit); |
| } |
| if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) { |
| mfsdram(DDR0_23, value); |
| syndrome = (value >> 8) & 0xff; |
| mfsdram(DDR0_34, laddr); |
| mfsdram(DDR0_35, haddr); |
| haddr &= 0x00000001; |
| mfsdram(DDR0_36, ldata); |
| mfsdram(DDR0_37, hdata); |
| if (int_status & DDR0_00_INT_STATUS_BIT5) |
| debug("Multiple uncorrectable ECC events"); |
| else |
| debug("Single uncorrectable ECC event"); |
| |
| debug(" detected\n 0x%01x%08x - 0x%08x%08x, " |
| "syndrome - 0x%02x\n", |
| haddr, laddr, hdata, ldata, syndrome); |
| } |
| if (int_status & DDR0_00_INT_STATUS_BIT6) |
| debug("DRAM initialization complete\n"); |
| #endif /* defined(DEBUG) */ |
| |
| return int_status; |
| } |
| |
| static int test_ecc(uint32_t ecc_addr) |
| { |
| uint32_t value; |
| volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr; |
| int ret = 0; |
| |
| WATCHDOG_RESET(); |
| |
| debug("Entering test_ecc(0x%08x)\n", ecc_addr); |
| /* Set up correct ECC in memory */ |
| disable_ecc(); |
| clear_and_enable_ecc(); |
| out_be32(ecc_mem, ECC_PATTERN); |
| out_be32(ecc_mem + 1, ECC_PATTERN); |
| ppcDcbf((u32)ecc_mem); |
| |
| /* Verify no ECC error reading back */ |
| value = in_be32(ecc_mem); |
| disable_ecc(); |
| if (ECC_PATTERN != value) { |
| debug("Data read error (no-error case): " |
| "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value); |
| ret = 1; |
| } |
| value = get_ecc_status(); |
| if (0x00000000 != value) { |
| /* Expected no ECC status reported */ |
| debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n", |
| 0x00000000, value); |
| ret = 1; |
| } |
| |
| /* Test for correctable error by creating a one-bit error */ |
| out_be32(ecc_mem, ECC_PATTERN_CORR); |
| ppcDcbf((u32)ecc_mem); |
| clear_and_enable_ecc(); |
| value = in_be32(ecc_mem); |
| disable_ecc(); |
| /* Test that the corrected data was read */ |
| if (ECC_PATTERN != value) { |
| debug("Data read error (correctable-error case): " |
| "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value); |
| ret = 1; |
| } |
| value = get_ecc_status(); |
| if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) { |
| /* Expected a single correctable error reported */ |
| debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n", |
| DDR0_00_INT_STATUS_BIT2, value); |
| ret = 1; |
| } |
| |
| /* Test for uncorrectable error by creating a two-bit error */ |
| out_be32(ecc_mem, ECC_PATTERN_UNCORR); |
| ppcDcbf((u32)ecc_mem); |
| clear_and_enable_ecc(); |
| value = in_be32(ecc_mem); |
| disable_ecc(); |
| /* Test that the corrected data was read */ |
| if (ECC_PATTERN_UNCORR != value) { |
| debug("Data read error (uncorrectable-error case): " |
| "expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR, |
| value); |
| ret = 1; |
| } |
| value = get_ecc_status(); |
| if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) { |
| /* Expected a single uncorrectable error reported */ |
| debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n", |
| DDR0_00_INT_STATUS_BIT4, value); |
| ret = 1; |
| } |
| |
| /* Remove error from SDRAM and enable ECC. */ |
| out_be32(ecc_mem, ECC_PATTERN); |
| ppcDcbf((u32)ecc_mem); |
| clear_and_enable_ecc(); |
| |
| return ret; |
| } |
| |
| int ecc_post_test(int flags) |
| { |
| int ret = 0; |
| uint32_t value; |
| uint32_t iaddr; |
| |
| mfsdram(DDR0_22, value); |
| if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) { |
| debug("SDRAM ECC not enabled, skipping ECC POST.\n"); |
| return 0; |
| } |
| |
| /* Mask all interrupts. */ |
| mfsdram(DDR0_01, value); |
| mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK) |
| | DDR0_01_INT_MASK_ALL_OFF); |
| |
| for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) { |
| ret = test_ecc(iaddr); |
| if (ret) |
| break; |
| } |
| /* |
| * Clear possible errors resulting from ECC testing. (If not done, we |
| * we could get an interrupt later on when exceptions are enabled.) |
| */ |
| set_mcsr(get_mcsr()); |
| debug("ecc_post_test() returning %d\n", ret); |
| return ret; |
| } |
| #endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */ |
| #endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ |