| /* |
| * mux.c |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <config.h> |
| #include "common_def.h" |
| #include <asm/arch/hardware.h> |
| #include <asm/io.h> |
| |
| #define MUX_CFG(value, offset) \ |
| __raw_writel(value, (CTRL_BASE + offset)); |
| |
| /* PAD Control Fields */ |
| #define SLEWCTRL (0x1 << 6) |
| #define RXACTIVE (0x1 << 5) |
| #define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ |
| #define PULLUDEN (0x0 << 3) /* Pull up enabled */ |
| #define PULLUDDIS (0x1 << 3) /* Pull up disabled */ |
| #define MODE(val) val /* used for Readability */ |
| |
| /* |
| * PAD CONTROL OFFSETS |
| * Field names corresponds to the pad signal name |
| */ |
| struct pad_signals { |
| int gpmc_ad0; |
| int gpmc_ad1; |
| int gpmc_ad2; |
| int gpmc_ad3; |
| int gpmc_ad4; |
| int gpmc_ad5; |
| int gpmc_ad6; |
| int gpmc_ad7; |
| int gpmc_ad8; |
| int gpmc_ad9; |
| int gpmc_ad10; |
| int gpmc_ad11; |
| int gpmc_ad12; |
| int gpmc_ad13; |
| int gpmc_ad14; |
| int gpmc_ad15; |
| int gpmc_a0; |
| int gpmc_a1; |
| int gpmc_a2; |
| int gpmc_a3; |
| int gpmc_a4; |
| int gpmc_a5; |
| int gpmc_a6; |
| int gpmc_a7; |
| int gpmc_a8; |
| int gpmc_a9; |
| int gpmc_a10; |
| int gpmc_a11; |
| int gpmc_wait0; |
| int gpmc_wpn; |
| int gpmc_be1n; |
| int gpmc_csn0; |
| int gpmc_csn1; |
| int gpmc_csn2; |
| int gpmc_csn3; |
| int gpmc_clk; |
| int gpmc_advn_ale; |
| int gpmc_oen_ren; |
| int gpmc_wen; |
| int gpmc_be0n_cle; |
| int lcd_data0; |
| int lcd_data1; |
| int lcd_data2; |
| int lcd_data3; |
| int lcd_data4; |
| int lcd_data5; |
| int lcd_data6; |
| int lcd_data7; |
| int lcd_data8; |
| int lcd_data9; |
| int lcd_data10; |
| int lcd_data11; |
| int lcd_data12; |
| int lcd_data13; |
| int lcd_data14; |
| int lcd_data15; |
| int lcd_vsync; |
| int lcd_hsync; |
| int lcd_pclk; |
| int lcd_ac_bias_en; |
| int mmc0_dat3; |
| int mmc0_dat2; |
| int mmc0_dat1; |
| int mmc0_dat0; |
| int mmc0_clk; |
| int mmc0_cmd; |
| int mii1_col; |
| int mii1_crs; |
| int mii1_rxerr; |
| int mii1_txen; |
| int mii1_rxdv; |
| int mii1_txd3; |
| int mii1_txd2; |
| int mii1_txd1; |
| int mii1_txd0; |
| int mii1_txclk; |
| int mii1_rxclk; |
| int mii1_rxd3; |
| int mii1_rxd2; |
| int mii1_rxd1; |
| int mii1_rxd0; |
| int rmii1_refclk; |
| int mdio_data; |
| int mdio_clk; |
| int spi0_sclk; |
| int spi0_d0; |
| int spi0_d1; |
| int spi0_cs0; |
| int spi0_cs1; |
| int ecap0_in_pwm0_out; |
| int uart0_ctsn; |
| int uart0_rtsn; |
| int uart0_rxd; |
| int uart0_txd; |
| int uart1_ctsn; |
| int uart1_rtsn; |
| int uart1_rxd; |
| int uart1_txd; |
| int i2c0_sda; |
| int i2c0_scl; |
| int mcasp0_aclkx; |
| int mcasp0_fsx; |
| int mcasp0_axr0; |
| int mcasp0_ahclkr; |
| int mcasp0_aclkr; |
| int mcasp0_fsr; |
| int mcasp0_axr1; |
| int mcasp0_ahclkx; |
| int xdma_event_intr0; |
| int xdma_event_intr1; |
| int nresetin_out; |
| int porz; |
| int nnmi; |
| int osc0_in; |
| int osc0_out; |
| int rsvd1; |
| int tms; |
| int tdi; |
| int tdo; |
| int tck; |
| int ntrst; |
| int emu0; |
| int emu1; |
| int osc1_in; |
| int osc1_out; |
| int pmic_power_en; |
| int rtc_porz; |
| int rsvd2; |
| int ext_wakeup; |
| int enz_kaldo_1p8v; |
| int usb0_dm; |
| int usb0_dp; |
| int usb0_ce; |
| int usb0_id; |
| int usb0_vbus; |
| int usb0_drvvbus; |
| int usb1_dm; |
| int usb1_dp; |
| int usb1_ce; |
| int usb1_id; |
| int usb1_vbus; |
| int usb1_drvvbus; |
| int ddr_resetn; |
| int ddr_csn0; |
| int ddr_cke; |
| int ddr_ck; |
| int ddr_nck; |
| int ddr_casn; |
| int ddr_rasn; |
| int ddr_wen; |
| int ddr_ba0; |
| int ddr_ba1; |
| int ddr_ba2; |
| int ddr_a0; |
| int ddr_a1; |
| int ddr_a2; |
| int ddr_a3; |
| int ddr_a4; |
| int ddr_a5; |
| int ddr_a6; |
| int ddr_a7; |
| int ddr_a8; |
| int ddr_a9; |
| int ddr_a10; |
| int ddr_a11; |
| int ddr_a12; |
| int ddr_a13; |
| int ddr_a14; |
| int ddr_a15; |
| int ddr_odt; |
| int ddr_d0; |
| int ddr_d1; |
| int ddr_d2; |
| int ddr_d3; |
| int ddr_d4; |
| int ddr_d5; |
| int ddr_d6; |
| int ddr_d7; |
| int ddr_d8; |
| int ddr_d9; |
| int ddr_d10; |
| int ddr_d11; |
| int ddr_d12; |
| int ddr_d13; |
| int ddr_d14; |
| int ddr_d15; |
| int ddr_dqm0; |
| int ddr_dqm1; |
| int ddr_dqs0; |
| int ddr_dqsn0; |
| int ddr_dqs1; |
| int ddr_dqsn1; |
| int ddr_vref; |
| int ddr_vtp; |
| int ddr_strben0; |
| int ddr_strben1; |
| int ain7; |
| int ain6; |
| int ain5; |
| int ain4; |
| int ain3; |
| int ain2; |
| int ain1; |
| int ain0; |
| int vrefp; |
| int vrefn; |
| }; |
| |
| struct module_pin_mux { |
| short reg_offset; |
| unsigned char val; |
| }; |
| |
| /* Pad control register offset */ |
| #define PAD_CTRL_BASE 0x800 |
| #define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ |
| (PAD_CTRL_BASE))->x) |
| |
| static struct module_pin_mux uart0_pin_mux[] = { |
| {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ |
| {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ |
| {-1}, |
| }; |
| |
| /* |
| * Configure the pin mux for the module |
| */ |
| static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) |
| { |
| int i; |
| |
| if (!mod_pin_mux) |
| return; |
| |
| for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) |
| MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); |
| } |
| |
| void enable_uart0_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| } |