| /* |
| * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000. |
| * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __MPC824X_H__ |
| #define __MPC824X_H__ |
| |
| #include <config.h> |
| |
| /* CPU Types */ |
| #define CPU_TYPE_601 0x01 /* PPC 601 CPU */ |
| #define CPU_TYPE_602 0x02 /* PPC 602 CPU */ |
| #define CPU_TYPE_603 0x03 /* PPC 603 CPU */ |
| #define CPU_TYPE_603E 0x06 /* PPC 603e CPU */ |
| #define CPU_TYPE_603P 0x07 /* PPC 603p CPU */ |
| #define CPU_TYPE_604 0x04 /* PPC 604 CPU */ |
| #define CPU_TYPE_604E 0x09 /* PPC 604e CPU */ |
| #define CPU_TYPE_604R 0x0a /* PPC 604r CPU */ |
| #define CPU_TYPE_750 0x08 /* PPC 750 CPU */ |
| #define CPU_TYPE_8240 0x81 /* PPC 8240 CPU */ |
| #define CPU_TYPE_8245 0x8081 /* PPC 8245/8241 CPU */ |
| #define _CACHE_ALIGN_SIZE 32 /* cache line size */ |
| |
| /* spr976 - DMISS data tlb miss address register |
| * spr977 - DCMP data tlb miss compare register |
| * spr978 - HASH1 PTEG1 address register |
| * spr980 - HASH2 PTEG2 address register |
| * IMISS - instruction tlb miss address register |
| * ICMP - instruction TLB mis compare register |
| * RPA - real page address register |
| * HID0 - hardware implemntation register |
| * HID2 - instruction address breakpoint register |
| */ |
| |
| /* Kahlua/MPC8240 defines */ |
| #define VEN_DEV_ID 0x00021057 /* Vendor and Dev. ID for MPC106 */ |
| #define KAHLUA_ID 0x00031057 /* Vendor & Dev Id for Kahlua's PCI */ |
| #define KAHLUA2_ID 0x00061057 /* 8245 is aka Kahlua-2 */ |
| #define BMC_BASE 0x80000000 /* Kahlua ID in PCI Memory space */ |
| #define CHRP_REG_ADDR 0xfec00000 /* MPC107 Config, Map B */ |
| #define CHRP_REG_DATA 0xfee00000 /* MPC107 Config, Map B */ |
| #define CHRP_ISA_MEM_PHYS 0xfd000000 |
| #define CHRP_ISA_MEM_BUS 0x00000000 |
| #define CHRP_ISA_MEM_SIZE 0x01000000 |
| #define CHRP_ISA_IO_PHYS 0xfe000000 |
| #define CHRP_ISA_IO_BUS 0x00000000 |
| #define CHRP_ISA_IO_SIZE 0x00800000 |
| #define CHRP_PCI_IO_PHYS 0xfe800000 |
| #define CHRP_PCI_IO_BUS 0x00800000 |
| #define CHRP_PCI_IO_SIZE 0x00400000 |
| #define CHRP_PCI_MEM_PHYS 0x80000000 |
| #define CHRP_PCI_MEM_BUS 0x80000000 |
| #define CHRP_PCI_MEM_SIZE 0x7d000000 |
| #define CHRP_PCI_MEMORY_PHYS 0x00000000 |
| #define CHRP_PCI_MEMORY_BUS 0x00000000 |
| #define CHRP_PCI_MEMORY_SIZE 0x40000000 |
| #define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */ |
| #define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */ |
| #define PREP_ISA_IO_PHYS 0x80000000 |
| #define PREP_ISA_IO_BUS 0x00000000 |
| #define PREP_ISA_IO_SIZE 0x00800000 |
| #define PREP_PCI_IO_PHYS 0x81000000 |
| #define PREP_PCI_IO_BUS 0x01000000 |
| #define PREP_PCI_IO_SIZE 0x3e800000 |
| #define PREP_PCI_MEM_PHYS 0xc0000000 |
| #define PREP_PCI_MEM_BUS 0x00000000 |
| #define PREP_PCI_MEM_SIZE 0x3f000000 |
| #define PREP_PCI_MEMORY_PHYS 0x00000000 |
| #define PREP_PCI_MEMORY_BUS 0x80000000 |
| #define PREP_PCI_MEMORY_SIZE 0x80000000 |
| #define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */ |
| #define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */ |
| #define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */ |
| #define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */ |
| #define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */ |
| #define MEM_CONT2_ADR 0x800000f4 /* MPC107 Memory control config. 2 */ |
| #define MEM_CONT3_ADR 0x800000f8 /* MPC107 Memory control config. 3 */ |
| #define MEM_CONT4_ADR 0x800000fc /* MPC107 Memory control config. 4 */ |
| #define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */ |
| #define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */ |
| #define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */ |
| #define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/ |
| #define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/ |
| #define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */ |
| #define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */ |
| #define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */ |
| #define XMEM_END2_ADR 0x8000009c /* MPC107 Extended mem. end addrs-lo*/ |
| #define OUT_DRV_CONT 0x80000073 /* MPC107 Output Driver Control reg */ |
| #define MEM_EN_ADR 0x800000a0 /* Memory bank enable */ |
| #define PAGE_MODE 0x800000a3 /* MPC107 Page Mode Counter/Timer */ |
| |
| /*----------------------------------------------------------------------- |
| * Exception offsets (PowerPC standard) |
| */ |
| #define EXC_OFF_RESERVED0 0x0000 /* Reserved */ |
| #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ |
| #define EXC_OFF_MACH_CHCK 0x0200 /* Machine Check */ |
| #define EXC_OFF_DATA_STOR 0x0300 /* Data Storage */ |
| #define EXC_OFF_INS_STOR 0x0400 /* Instruction Storage */ |
| #define EXC_OFF_EXTERNAL 0x0500 /* External */ |
| #define EXC_OFF_ALIGN 0x0600 /* Alignment */ |
| #define EXC_OFF_PROGRAM 0x0700 /* Program */ |
| #define EXC_OFF_FPUNAVAIL 0x0800 /* Floating-point Unavailable */ |
| #define EXC_OFF_DECR 0x0900 /* Decrementer */ |
| #define EXC_OFF_RESERVED1 0x0A00 /* Reserved */ |
| #define EXC_OFF_RESERVED2 0x0B00 /* Reserved */ |
| #define EXC_OFF_SYS_CALL 0x0C00 /* System Call */ |
| #define EXC_OFF_TRACE 0x0D00 /* Trace */ |
| #define EXC_OFF_FPUNASSIST 0x0E00 /* Floating-point Assist */ |
| |
| /* 0x0E10 - 0x0FFF are marked reserved in The PowerPC Architecture book */ |
| /* these found in DINK code - may not apply to 8240*/ |
| #define EXC_OFF_PMI 0x0F00 /* Performance Monitoring Interrupt */ |
| #define EXC_OFF_VMXUI 0x0F20 /* VMX (AltiVec) Unavailable Interrupt */ |
| |
| /* 0x1000 - 0x2FFF are implementation specific */ |
| /* these found in DINK code - may not apply to 8240 */ |
| #define EXC_OFF_ITME 0x1000 /* Instruction Translation Miss Exception */ |
| #define EXC_OFF_DLTME 0x1100 /* Data Load Translation Miss Exception */ |
| #define EXC_OFF_DSTME 0x1200 /* Data Store Translation Miss Exception */ |
| #define EXC_OFF_IABE 0x1300 /* Instruction Addr Breakpoint Exception */ |
| #define EXC_OFF_SMIE 0x1400 /* System Management Interrupt Exception */ |
| #define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/ |
| #define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */ |
| |
| #define _START_OFFSET EXC_OFF_SYS_RESET |
| |
| #define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */ |
| #define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */ |
| #define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */ |
| #define MAP_A_CONFIG_DATA_LOW 0x0CFC /* Lower half of CONFIG_DAT for Map A */ |
| #define MAP_B_CONFIG_ADDR_HIGH 0xfec0 /* Upper half of CONFIG_ADDR for Map B */ |
| #define MAP_B_CONFIG_ADDR_LOW 0x0000 /* Lower half of CONFIG_ADDR for Map B */ |
| #define MAP_B_CONFIG_DATA_HIGH 0xfee0 /* Upper half of CONFIG_DAT for Map B */ |
| #define MAP_B_CONFIG_DATA_LOW 0x0000 /* Lower half of CONFIG_DAT for Map B */ |
| |
| |
| #if defined(CONFIG_SYS_ADDR_MAP_A) |
| #define CONFIG_ADDR_HIGH MAP_A_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */ |
| #define CONFIG_ADDR_LOW MAP_A_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */ |
| #define CONFIG_DATA_HIGH MAP_A_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */ |
| #define CONFIG_DATA_LOW MAP_A_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */ |
| #else /* Assume Map B, default */ |
| #define CONFIG_ADDR_HIGH MAP_B_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */ |
| #define CONFIG_ADDR_LOW MAP_B_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */ |
| #define CONFIG_DATA_HIGH MAP_B_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */ |
| #define CONFIG_DATA_LOW MAP_B_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */ |
| #endif |
| |
| #define CONFIG_ADDR (CONFIG_ADDR_HIGH << 16 | CONFIG_ADDR_LOW) |
| |
| #define CONFIG_DATA (CONFIG_DATA_HIGH << 16 | CONFIG_DATA_LOW) |
| |
| /* Macros to write to config registers. addr should be a constant in all cases */ |
| |
| #define CONFIG_WRITE_BYTE( addr, data ) \ |
| __asm__ __volatile__( \ |
| " stwbrx %1, 0, %0\n \ |
| sync\n \ |
| stb %3, %4(%2)\n \ |
| sync " \ |
| : /* no output */ \ |
| : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ |
| "b" (CONFIG_DATA), "r" (data), \ |
| "n" ((addr) & 3)); |
| |
| #define CONFIG_WRITE_HALFWORD( addr, data ) \ |
| __asm__ __volatile__( \ |
| " stwbrx %1, 0, %0\n \ |
| sync\n \ |
| sthbrx %3, %4, %2\n \ |
| sync " \ |
| : /* no output */ \ |
| : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ |
| "r" (CONFIG_DATA), "r" (data), \ |
| "b" ((addr) & 3)); |
| |
| /* this assumes it's writeing on word boundaries*/ |
| #define CONFIG_WRITE_WORD( addr, data ) \ |
| __asm__ __volatile__( \ |
| " stwbrx %1, 0, %0\n \ |
| sync\n \ |
| stwbrx %3, 0, %2\n \ |
| sync " \ |
| : /* no output */ \ |
| : "r" (CONFIG_ADDR), "r" (addr), \ |
| "r" (CONFIG_DATA), "r" (data)); |
| |
| /* Configuration register reads*/ |
| |
| #define CONFIG_READ_BYTE( addr, reg ) \ |
| __asm__ ( \ |
| " stwbrx %1, 0, %2\n \ |
| sync\n \ |
| lbz %0, %4(%3)\n \ |
| sync " \ |
| : "=r" (reg) \ |
| : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ |
| "b" (CONFIG_DATA), "n" ((addr) & 3)); |
| |
| |
| #define CONFIG_READ_HALFWORD( addr, reg ) \ |
| __asm__ ( \ |
| " stwbrx %1, 0, %2\n \ |
| sync\n \ |
| lhbrx %0, %4, %3\n \ |
| sync " \ |
| : "=r" (reg) \ |
| : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ |
| "r" (CONFIG_DATA), \ |
| "b" ((addr) & 3)); |
| |
| /* this assumes it's reading on word boundaries*/ |
| #define CONFIG_READ_WORD( addr, reg ) \ |
| __asm__ ( \ |
| " stwbrx %1, 0, %2\n \ |
| sync\n \ |
| lwbrx %0, 0, %3\n \ |
| sync " \ |
| : "=r" (reg) \ |
| : "r" (addr), "r" (CONFIG_ADDR),\ |
| "r" (CONFIG_DATA)); |
| |
| /* |
| * configuration register 'addresses'. |
| * These are described in chaper 5 of the 8240 users manual. |
| * Where the register has an abreviation in the manual, this has |
| * been usaed here, otherwise a name in keeping with the norm has |
| * been invented. |
| * Note that some of these registers aren't documented in the manual. |
| */ |
| |
| #define PCICR 0x80000004 /* PCI Command Register */ |
| #define PCISR 0x80000006 /* PCI Status Register */ |
| #define REVID 0x80000008 /* CPU revision id */ |
| #define PIR 0x80000009 /* PCI Programming Interface Register */ |
| #define PBCCR 0x8000000b /* PCI Base Class Code Register */ |
| #define PCLSR 0x8000000c /* Processor Cache Line Size Register */ |
| #define PLTR 0x8000000d /* PCI Latancy Timer Register */ |
| #define PHTR 0x8000000e /* PCI Header Type Register */ |
| #define BISTCTRL 0x8000000f /* BIST Control */ |
| #define LMBAR 0x80000010 /* Local Base Address Register */ |
| #define PCSRBAR 0x80000014 /* PCSR Base Address Register */ |
| #define ILR 0x8000003c /* PCI Interrupt Line Register */ |
| #define IPR 0x8000003d /* Interrupt Pin Register */ |
| #define MINGNT 0x8000003e /* MIN GNI */ |
| #define MAXLAT 0x8000003f /* MAX LAT */ |
| #define PCIACR 0x80000046 /* PCI Arbiter Control Register */ |
| #define PMCR1 0x80000070 /* Power management config. 1 */ |
| #define PMCR2 0x80000072 /* Power management config. 2 */ |
| #define ODCR 0x80000073 /* Output Driver Control Register */ |
| #define CLKDCR 0x80000074 /* CLK Driver Control Register */ |
| #if defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) |
| #define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */ |
| #define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */ |
| #endif |
| #define EUMBBAR 0x80000078 /* Embedded Utilities Memory Block Base Address Register */ |
| #define EUMBBAR_VAL 0x80500000 /* PCI Relocation offset for EUMB region */ |
| #define EUMBSIZE 0x00100000 /* Size of EUMB region */ |
| |
| #define MSAR1 0x80000080 /* Memory Starting Address Register 1 */ |
| #define MSAR2 0x80000084 /* Memory Starting Address Register 2 */ |
| #define EMSAR1 0x80000088 /* Extended Memory Starting Address Register 1*/ |
| #define EMSAR2 0x8000008c /* Extended Memory Starting Address Register 2*/ |
| #define MEAR1 0x80000090 /* Memory Ending Address Register 1 */ |
| #define MEAR2 0x80000094 /* Memory Ending Address Register 2 */ |
| #define EMEAR1 0x80000098 /* Extended Memory Ending Address Register 1 */ |
| #define EMEAR2 0x8000009c /* Extended Memory Ending Address Register 2 */ |
| #define MBER 0x800000a0 /* Memory bank Enable Register*/ |
| #define MPMR 0x800000a3 /* Memory Page Mode Register (stores PGMAX) */ |
| #define PICR1 0x800000a8 /* Processor Interface Configuration Register 1 */ |
| #define PICR2 0x800000ac /* Processor Interface Configuration Register 2 */ |
| #define ECCSBECR 0x800000b8 /* ECC Single-Bit Error Counter Register */ |
| #define ECCSBETR 0x800000b8 /* ECC Single-Bit Error Trigger Register */ |
| #define ERRENR1 0x800000c0 /* Error Enableing Register 1 */ |
| #define ERRENR2 0x800000c4 /* Error Enableing Register 2 */ |
| #define ERRDR1 0x800000c1 /* Error Detection Register 1 */ |
| #define IPBESR 0x800000c3 /* Internal Processor Error Status Register */ |
| #define ERRDR2 0x800000c5 /* Error Detection Register 2 */ |
| #define PBESR 0x800000c7 /* PCI Bus Error Status Register */ |
| #define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */ |
| #define AMBOR 0x800000e0 /* Address Map B Options Register */ |
| #define PCMBCR 0x800000e1 /* PCI/Memory Buffer Configuration */ |
| #define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */ |
| #define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */ |
| #define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */ |
| #define MCCR4 0x800000fc /* Memory Control Configuration Register 4 */ |
| |
| /* some values for some of the above */ |
| |
| #define PICR1_CF_APARK 0x00000008 |
| #define PICR1_LE_MODE 0x00000020 |
| #define PICR1_ST_GATH_EN 0x00000040 |
| #if defined(CONFIG_MPC8240) |
| #define PICR1_EN_PCS 0x00000080 /* according to dink code, sets the 8240 to handle pci config space */ |
| #elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) |
| #define PICR1_NO_BUSW_CK 0x00000080 /* no bus width check for flash writes */ |
| #define PICR1_DEC 0x00000100 /* Time Base enable on 8245/8241 */ |
| #define ERCR1 0x800000d0 /* Extended ROM Configuration Register 1 */ |
| #define ERCR2 0x800000d4 /* Extended ROM Configuration Register 2 */ |
| #define ERCR3 0x800000d8 /* Extended ROM Configuration Register 3 */ |
| #define ERCR4 0x800000dc /* Extended ROM Configuration Register 4 */ |
| #define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */ |
| #define MIOCR1_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */ |
| #define MIOCR1_SHIFT 2 |
| #define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */ |
| #define MIOCR2_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */ |
| #define MIOCR2_SHIFT 3 |
| #define ODCR_ADR_X 0x80000070 /* Output Driver Control register */ |
| #define ODCR_SHIFT 3 |
| #define PMCR2_ADR 0x80000072 /* Power Mgmnt Cfg 2 register */ |
| #define PMCR2_ADR_X 0x80000070 |
| #define PMCR2_SHIFT 3 |
| #define PMCR1_ADR 0x80000070 /* Power Mgmnt Cfg 1 reister */ |
| #else |
| #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) |
| #endif |
| #define PICR1_CF_DPARK 0x00000200 |
| #define PICR1_MCP_EN 0x00000800 |
| #define PICR1_FLASH_WR_EN 0x00001000 |
| #ifdef CONFIG_MPC8240 |
| #define PICR1_ADDRESS_MAP 0x00010000 |
| #define PIRC1_MSK 0xff000000 |
| #endif |
| #define PICR1_PROC_TYPE_MSK 0x00060000 |
| #define PICR1_PROC_TYPE_603E 0x00040000 |
| #define PICR1_RCS0 0x00100000 |
| |
| #define PICR2_CF_SNOOP_WS_MASK 0x000c0000 |
| #define PICR2_CF_SNOOP_WS_0WS 0x00000000 |
| #define PICR2_CF_SNOOP_WS_1WS 0x00040000 |
| #define PICR2_CF_SNOOP_WS_2WS 0x00080000 |
| #define PICR2_CF_SNOOP_WS_3WS 0x000c0000 |
| #define PICR2_CF_APHASE_WS_MASK 0x0000000c |
| #define PICR2_CF_APHASE_WS_0WS 0x00000000 |
| #define PICR2_CF_APHASE_WS_1WS 0x00000004 |
| #define PICR2_CF_APHASE_WS_2WS 0x00000008 |
| #define PICR2_CF_APHASE_WS_3WS 0x0000000c |
| |
| #define MCCR1_ROMNAL_SHIFT 28 |
| #define MCCR1_ROMNAL_MSK 0xf0000000 |
| #define MCCR1_ROMFAL_SHIFT 23 |
| #define MCCR1_ROMFAL_MSK 0x0f800000 |
| #define MCCR1_DBUS_SIZE0 0x00400000 |
| #define MCCR1_BURST 0x00100000 |
| #define MCCR1_MEMGO 0x00080000 |
| #define MCCR1_SREN 0x00040000 |
| #if defined(CONFIG_MPC8240) |
| #define MCCR1_RAM_TYPE 0x00020000 |
| #elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) |
| #define MCCR1_SDRAM_EN 0x00020000 |
| #else |
| #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) |
| #endif |
| #define MCCR1_PCKEN 0x00010000 |
| #define MCCR1_BANK1ROW_SHIFT 2 |
| #define MCCR1_BANK2ROW_SHIFT 4 |
| #define MCCR1_BANK3ROW_SHIFT 6 |
| #define MCCR1_BANK4ROW_SHIFT 8 |
| #define MCCR1_BANK5ROW_SHIFT 10 |
| #define MCCR1_BANK6ROW_SHIFT 12 |
| #define MCCR1_BANK7ROW_SHIFT 14 |
| |
| #define MCCR2_TS_WAIT_TIMER_MSK 0xe0000000 |
| #define MCCR2_TS_WAIT_TIMER_SHIFT 29 |
| #define MCCR2_ASRISE_MSK 0x1e000000 |
| #define MCCR2_ASRISE_SHIFT 25 |
| #define MCCR2_ASFALL_MSK 0x01e00000 |
| #define MCCR2_ASFALL_SHIFT 21 |
| |
| #define MCCR2_INLINE_PAR_NOT_ECC 0x00100000 |
| #define MCCR2_WRITE_PARITY_CHK 0x00080000 |
| #define MCCR2_INLFRD_PARECC_CHK_EN 0x00040000 |
| #ifdef CONFIG_MPC8240 |
| #define MCCR2_ECC_EN 0x00020000 |
| #define MCCR2_EDO 0x00010000 |
| #endif |
| #define MCCR2_REFINT_MSK 0x0000fffc |
| #define MCCR2_REFINT_SHIFT 2 |
| #define MCCR2_RSV_PG 0x00000002 |
| #define MCCR2_PMW_PAR 0x00000001 |
| |
| #define MCCR3_BSTOPRE2TO5_MSK 0xf0000000 /*BSTOPRE[2-5]*/ |
| #define MCCR3_BSTOPRE2TO5_SHIFT 28 |
| #define MCCR3_REFREC_MSK 0x0f000000 |
| #define MCCR3_REFREC_SHIFT 24 |
| #ifdef CONFIG_MPC8240 |
| #define MCCR3_RDLAT_MSK 0x00f00000 |
| #define MCCR3_RDLAT_SHIFT 20 |
| #define MCCR3_CPX 0x00010000 |
| #define MCCR3_RAS6P_MSK 0x00078000 |
| #define MCCR3_RAS6P_SHIFT 15 |
| #define MCCR3_CAS5_MSK 0x00007000 |
| #define MCCR3_CAS5_SHIFT 12 |
| #define MCCR3_CP4_MSK 0x00000e00 |
| #define MCCR3_CP4_SHIFT 9 |
| #define MCCR3_CAS3_MSK 0x000001c0 |
| #define MCCR3_CAS3_SHIFT 6 |
| #define MCCR3_RCD2_MSK 0x00000038 |
| #define MCCR3_RCD2_SHIFT 3 |
| #define MCCR3_RP1_MSK 0x00000007 |
| #define MCCR3_RP1_SHIFT 0 |
| #endif |
| |
| #define MCCR4_PRETOACT_MSK 0xf0000000 |
| #define MCCR4_PRETOACT_SHIFT 28 |
| #define MCCR4_ACTTOPRE_MSK 0x0f000000 |
| #define MCCR4_ACTTOPRE_SHIFT 24 |
| #define MCCR4_WMODE 0x00800000 |
| #define MCCR4_INLINE 0x00400000 |
| #if defined(CONFIG_MPC8240) |
| #define MCCR4_BIT21 0x00200000 /* this include cos DINK code sets it- unknown function*/ |
| #elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) |
| #define MCCR4_EXTROM 0x00200000 /* enables Extended ROM space */ |
| #else |
| #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) |
| #endif |
| #define MCCR4_REGISTERED 0x00100000 |
| #define MCCR4_BSTOPRE0TO1_MSK 0x000c0000 /*BSTOPRE[0-1]*/ |
| #define MCCR4_BSTOPRE0TO1_SHIFT 18 |
| #define MCCR4_REGDIMM 0x00008000 |
| #define MCCR4_SDMODE_MSK 0x00007f00 |
| #define MCCR4_SDMODE_SHIFT 8 |
| #define MCCR4_ACTTORW_MSK 0x000000f0 |
| #define MCCR4_ACTTORW_SHIFT 4 |
| #define MCCR4_BSTOPRE6TO9_MSK 0x0000000f /*BSTOPRE[6-9]*/ |
| #define MCCR4_BSTOPRE6TO9_SHIFT 0 |
| #define MCCR4_DBUS_SIZE2_SHIFT 17 |
| |
| #define MICR_ADDR_MASK 0x0ff00000 |
| #define MICR_ADDR_SHIFT 20 |
| #define MICR_EADDR_MASK 0x30000000 |
| #define MICR_EADDR_SHIFT 28 |
| |
| /*eumb and epic config*/ |
| |
| #define EPIC_FPR 0x00041000 |
| #define EPIC_GCR 0x00041020 |
| #define EPIC_EICR 0x00041030 |
| #define EPIC_EVI 0x00041080 |
| #define EPIC_PI 0x00041090 |
| #define EPIC_SVR 0x000410E0 |
| #define EPIC_TFRR 0x000410F0 |
| |
| /* |
| * Note the information for these is rather mangled in the 8240 manual. |
| * These are guesses. |
| */ |
| |
| #define EPIC_GTCCR0 0x00041100 |
| #define EPIC_GTCCR1 0x00041140 |
| #define EPIC_GTCCR2 0x00041180 |
| #define EPIC_GTCCR3 0x000411C0 |
| #define EPIC_GTBCR0 0x00041110 |
| #define EPIC_GTBCR1 0x00041150 |
| #define EPIC_GTBCR2 0x00041190 |
| #define EPIC_GTBCR3 0x000411D0 |
| #define EPIC_GTVPR0 0x00041120 |
| #define EPIC_GTVPR1 0x00041160 |
| #define EPIC_GTVPR2 0x000411a0 |
| #define EPIC_GTVPR3 0x000411e0 |
| #define EPIC_GTDR0 0x00041130 |
| #define EPIC_GTDR1 0x00041170 |
| #define EPIC_GTDR2 0x000411b0 |
| #define EPIC_GTDR3 0x000411f0 |
| |
| #define EPIC_IVPR0 0x00050200 |
| #define EPIC_IVPR1 0x00050220 |
| #define EPIC_IVPR2 0x00050240 |
| #define EPIC_IVPR3 0x00050260 |
| #define EPIC_IVPR4 0x00050280 |
| |
| #define EPIC_SVPR0 0x00050200 |
| #define EPIC_SVPR1 0x00050220 |
| #define EPIC_SVPR2 0x00050240 |
| #define EPIC_SVPR3 0x00050260 |
| #define EPIC_SVPR4 0x00050280 |
| #define EPIC_SVPR5 0x000502A0 |
| #define EPIC_SVPR6 0x000502C0 |
| #define EPIC_SVPR7 0x000502E0 |
| #define EPIC_SVPR8 0x00050300 |
| #define EPIC_SVPR9 0x00050320 |
| #define EPIC_SVPRa 0x00050340 |
| #define EPIC_SVPRb 0x00050360 |
| #define EPIC_SVPRc 0x00050380 |
| #define EPIC_SVPRd 0x000503A0 |
| #define EPIC_SVPRe 0x000503C0 |
| #define EPIC_SVPRf 0x000503E0 |
| |
| /* MPC8240 Byte Swap/PCI Support Macros */ |
| #define BYTE_SWAP_16_BIT(x) ( (((x) & 0x00ff) << 8) | ( (x) >> 8) ) |
| #define LONGSWAP(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\ |
| (((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) ) |
| #define PCISWAP(x) LONGSWAP(x) |
| |
| #ifndef __ASSEMBLY__ |
| |
| /* |
| * MPC107 Support |
| * |
| */ |
| unsigned int mpc824x_mpc107_getreg(unsigned int regNum); |
| void mpc824x_mpc107_setreg(unsigned int regNum, unsigned int regVal); |
| void mpc824x_mpc107_write8(unsigned int address, unsigned char data); |
| void mpc824x_mpc107_write16(unsigned int address, unsigned short data); |
| void mpc824x_mpc107_write32(unsigned int address, unsigned int data); |
| unsigned char mpc824x_mpc107_read8(unsigned int address); |
| unsigned short mpc824x_mpc107_read16(unsigned int address); |
| unsigned int mpc824x_mpc107_read32(unsigned int address); |
| unsigned int mpc824x_eummbar_read(unsigned int regNum); |
| void mpc824x_eummbar_write(unsigned int regNum, unsigned int regVal); |
| |
| #ifdef CONFIG_PCI |
| struct pci_controller; |
| void pci_cpm824x_init(struct pci_controller* hose); |
| #endif |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* __MPC824X_H__ */ |