| /* |
| * (C) Copyright 2010 |
| * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <asm/io.h> |
| |
| #include <gdsys_fpga.h> |
| |
| #define CH7301_I2C_ADDR 0x75 |
| |
| #define ICS8N3QV01_I2C_ADDR 0x6E |
| #define ICS8N3QV01_FREF 114285 |
| |
| #define SIL1178_MASTER_I2C_ADDRESS 0x38 |
| #define SIL1178_SLAVE_I2C_ADDRESS 0x39 |
| |
| #define PIXCLK_640_480_60 25180000 |
| |
| #define BASE_WIDTH 32 |
| #define BASE_HEIGHT 16 |
| #define BUFSIZE (BASE_WIDTH * BASE_HEIGHT) |
| |
| enum { |
| CH7301_CM = 0x1c, /* Clock Mode Register */ |
| CH7301_IC = 0x1d, /* Input Clock Register */ |
| CH7301_GPIO = 0x1e, /* GPIO Control Register */ |
| CH7301_IDF = 0x1f, /* Input Data Format Register */ |
| CH7301_CD = 0x20, /* Connection Detect Register */ |
| CH7301_DC = 0x21, /* DAC Control Register */ |
| CH7301_HPD = 0x23, /* Hot Plug Detection Register */ |
| CH7301_TCTL = 0x31, /* DVI Control Input Register */ |
| CH7301_TPCP = 0x33, /* DVI PLL Charge Pump Ctrl Register */ |
| CH7301_TPD = 0x34, /* DVI PLL Divide Register */ |
| CH7301_TPVT = 0x35, /* DVI PLL Supply Control Register */ |
| CH7301_TPF = 0x36, /* DVI PLL Filter Register */ |
| CH7301_TCT = 0x37, /* DVI Clock Test Register */ |
| CH7301_TSTP = 0x48, /* Test Pattern Register */ |
| CH7301_PM = 0x49, /* Power Management register */ |
| CH7301_VID = 0x4a, /* Version ID Register */ |
| CH7301_DID = 0x4b, /* Device ID Register */ |
| CH7301_DSP = 0x56, /* DVI Sync polarity Register */ |
| }; |
| |
| #if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178) |
| static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data) |
| { |
| ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); |
| ihs_i2c_t *i2c = &fpga->i2c; |
| |
| while (in_le16(&fpga->extended_interrupt) & (1 << 12)) |
| ; |
| out_le16(&i2c->write_mailbox_ext, reg | (data << 8)); |
| out_le16(&i2c->write_mailbox, 0xc400 | (slave << 1)); |
| } |
| |
| static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg) |
| { |
| ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); |
| ihs_i2c_t *i2c = &fpga->i2c; |
| unsigned int ctr = 0; |
| |
| while (in_le16(&fpga->extended_interrupt) & (1 << 12)) |
| ; |
| out_le16(&fpga->extended_interrupt, 1 << 14); |
| out_le16(&i2c->write_mailbox_ext, reg); |
| out_le16(&i2c->write_mailbox, 0xc000 | (slave << 1)); |
| while (!(in_le16(&fpga->extended_interrupt) & (1 << 14))) { |
| udelay(100000); |
| if (ctr++ > 5) { |
| printf("iic receive timeout\n"); |
| break; |
| } |
| } |
| return in_le16(&i2c->read_mailbox_ext) >> 8; |
| } |
| #endif |
| |
| #ifdef CONFIG_SYS_MPC92469AC |
| static void mpc92469ac_calc_parameters(unsigned int fout, |
| unsigned int *post_div, unsigned int *feedback_div) |
| { |
| unsigned int n = *post_div; |
| unsigned int m = *feedback_div; |
| unsigned int a; |
| unsigned int b = 14745600 / 16; |
| |
| if (fout < 50169600) |
| n = 8; |
| else if (fout < 100339199) |
| n = 4; |
| else if (fout < 200678399) |
| n = 2; |
| else |
| n = 1; |
| |
| a = fout * n + (b / 2); /* add b/2 for proper rounding */ |
| |
| m = a / b; |
| |
| *post_div = n; |
| *feedback_div = m; |
| } |
| |
| static void mpc92469ac_set(unsigned screen, unsigned int fout) |
| { |
| ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); |
| unsigned int n; |
| unsigned int m; |
| unsigned int bitval = 0; |
| mpc92469ac_calc_parameters(fout, &n, &m); |
| |
| switch (n) { |
| case 1: |
| bitval = 0x00; |
| break; |
| case 2: |
| bitval = 0x01; |
| break; |
| case 4: |
| bitval = 0x02; |
| break; |
| case 8: |
| bitval = 0x03; |
| break; |
| } |
| |
| out_le16(&fpga->mpc3w_control, (bitval << 9) | m); |
| } |
| #endif |
| |
| #ifdef CONFIG_SYS_ICS8N3QV01 |
| static void ics8n3qv01_calc_parameters(unsigned int fout, |
| unsigned int *_mint, unsigned int *_mfrac, |
| unsigned int *_n) |
| { |
| unsigned int n; |
| unsigned int foutiic; |
| unsigned int fvcoiic; |
| unsigned int mint; |
| unsigned long long mfrac; |
| |
| n = 2550000000U / fout; |
| if ((n & 1) && (n > 5)) |
| n -= 1; |
| |
| foutiic = fout - (fout / 10000); |
| fvcoiic = foutiic * n; |
| |
| mint = fvcoiic / 114285000; |
| if ((mint < 17) || (mint > 63)) |
| printf("ics8n3qv01_calc_parameters: cannot determine mint\n"); |
| |
| mfrac = ((unsigned long long)fvcoiic % 114285000LL) * 262144LL |
| / 114285000LL; |
| |
| *_mint = mint; |
| *_mfrac = mfrac; |
| *_n = n; |
| } |
| |
| static void ics8n3qv01_set(unsigned screen, unsigned int fout) |
| { |
| unsigned int n; |
| unsigned int mint; |
| unsigned int mfrac; |
| u8 reg0, reg4, reg8, reg12, reg18, reg20; |
| |
| ics8n3qv01_calc_parameters(fout, &mint, &mfrac, &n); |
| |
| reg0 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0) & 0xc0; |
| reg0 |= (mint & 0x1f) << 1; |
| reg0 |= (mfrac >> 17) & 0x01; |
| fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 0, reg0); |
| |
| reg4 = mfrac >> 9; |
| fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 4, reg4); |
| |
| reg8 = mfrac >> 1; |
| fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 8, reg8); |
| |
| reg12 = mfrac << 7; |
| reg12 |= n & 0x7f; |
| fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 12, reg12); |
| |
| reg18 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 18) & 0x03; |
| reg18 |= 0x20; |
| fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 18, reg18); |
| |
| reg20 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 20) & 0x1f; |
| reg20 |= mint & (1 << 5); |
| fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 20, reg20); |
| } |
| #endif |
| |
| static int osd_write_videomem(unsigned screen, unsigned offset, |
| u16 *data, size_t charcount) |
| { |
| ihs_fpga_t *fpga = |
| (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); |
| unsigned int k; |
| |
| for (k = 0; k < charcount; ++k) { |
| if (offset + k >= BUFSIZE) |
| return -1; |
| out_le16(&fpga->videomem + offset + k, data[k]); |
| } |
| |
| return charcount; |
| } |
| |
| static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| unsigned screen; |
| |
| for (screen = 0; screen < CONFIG_SYS_OSD_SCREENS; ++screen) { |
| unsigned x; |
| unsigned y; |
| unsigned charcount; |
| unsigned len; |
| u8 color; |
| unsigned int k; |
| u16 buf[BUFSIZE]; |
| char *text; |
| int res; |
| |
| if (argc < 5) { |
| cmd_usage(cmdtp); |
| return 1; |
| } |
| |
| x = simple_strtoul(argv[1], NULL, 16); |
| y = simple_strtoul(argv[2], NULL, 16); |
| color = simple_strtoul(argv[3], NULL, 16); |
| text = argv[4]; |
| charcount = strlen(text); |
| len = (charcount > BUFSIZE) ? BUFSIZE : charcount; |
| |
| for (k = 0; k < len; ++k) |
| buf[k] = (text[k] << 8) | color; |
| |
| res = osd_write_videomem(screen, y * BASE_WIDTH + x, buf, len); |
| if (res < 0) |
| return res; |
| } |
| |
| return 0; |
| } |
| |
| int osd_probe(unsigned screen) |
| { |
| ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); |
| ihs_osd_t *osd = &fpga->osd; |
| u16 version = in_le16(&osd->version); |
| u16 features = in_le16(&osd->features); |
| unsigned width; |
| unsigned height; |
| u8 value; |
| |
| width = ((features & 0x3f00) >> 8) + 1; |
| height = (features & 0x001f) + 1; |
| |
| printf("OSD%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n", |
| screen, version/100, version%100, width, height); |
| |
| #ifdef CONFIG_SYS_CH7301 |
| value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); |
| if (value != 0x17) { |
| printf(" Probing CH7301 failed, DID %02x\n", value); |
| return -1; |
| } |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); |
| #endif |
| |
| #ifdef CONFIG_SYS_MPC92469AC |
| mpc92469ac_set(screen, PIXCLK_640_480_60); |
| #endif |
| |
| #ifdef CONFIG_SYS_ICS8N3QV01 |
| ics8n3qv01_set(screen, PIXCLK_640_480_60); |
| #endif |
| |
| #ifdef CONFIG_SYS_SIL1178 |
| value = fpga_iic_read(screen, SIL1178_SLAVE_I2C_ADDRESS, 0x02); |
| if (value != 0x06) { |
| printf(" Probing CH7301 SIL1178, DEV_IDL %02x\n", value); |
| return -1; |
| } |
| /* magic initialization sequence adapted from datasheet */ |
| fpga_iic_write(screen, SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36); |
| fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); |
| #endif |
| |
| out_le16(&fpga->videocontrol, 0x0002); |
| out_le16(&osd->control, 0x0049); |
| |
| out_le16(&osd->xy_size, ((32 - 1) << 8) | (16 - 1)); |
| |
| return 0; |
| } |
| |
| int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| unsigned screen; |
| |
| for (screen = 0; screen < CONFIG_SYS_OSD_SCREENS; ++screen) { |
| unsigned x; |
| unsigned y; |
| unsigned k; |
| u16 buffer[BASE_WIDTH]; |
| char *rp; |
| u16 *wp = buffer; |
| unsigned count = (argc > 4) ? |
| simple_strtoul(argv[4], NULL, 16) : 1; |
| |
| if ((argc < 4) || (strlen(argv[3]) % 4)) { |
| cmd_usage(cmdtp); |
| return 1; |
| } |
| |
| x = simple_strtoul(argv[1], NULL, 16); |
| y = simple_strtoul(argv[2], NULL, 16); |
| rp = argv[3]; |
| |
| |
| while (*rp) { |
| char substr[5]; |
| |
| memcpy(substr, rp, 4); |
| substr[4] = 0; |
| *wp = simple_strtoul(substr, NULL, 16); |
| |
| rp += 4; |
| wp++; |
| if (wp - buffer > BASE_WIDTH) |
| break; |
| } |
| |
| for (k = 0; k < count; ++k) { |
| unsigned offset = |
| y * BASE_WIDTH + x + k * (wp - buffer); |
| osd_write_videomem(screen, offset, buffer, |
| wp - buffer); |
| } |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| osdw, 5, 0, osd_write, |
| "write 16-bit hex encoded buffer to osd memory", |
| "pos_x pos_y buffer count\n" |
| ); |
| |
| U_BOOT_CMD( |
| osdp, 5, 0, osd_print, |
| "write ASCII buffer to osd memory", |
| "pos_x pos_y color text\n" |
| ); |