include/configs/netstar.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
  *
  * Configuation settings for the TI OMAP NetStar board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <configs/omap1510.h>

 #define CONFIG_ARM925T	1		/* This is an arm925t CPU */
 #define CONFIG_OMAP	1		/* in a TI OMAP core */
 #define CONFIG_OMAP1510 1		/* which is in a 5910 */

 /* Input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ		150000000	/* 150MHz */
 #define CONFIG_XTAL_FREQ		12000000	/*  12MHz */

 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

 #define CONFIG_MISC_INIT_R		/* There is nothing to really init */
 #define BOARD_LATE_INIT			/* but we flash the LEDs here */

 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 #define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET

 /*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x10000000
 #define PHYS_SDRAM_1_SIZE		(64 * 1024 * 1024)
 #define PHYS_FLASH_1			0x00000000

 #define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)

 /*
  * Environment settings
  */
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR			0x4000
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(8 * 1024)
 #define CONFIG_ENV_ADDR_REDUND		0x6000
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_OVERWRITE

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)

 /*
  * The stack size is set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE		(1 * 1024 * 1024)

 /*
  * Hardware drivers
  */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)
 #define CONFIG_SYS_NS16550_COM1		OMAP1510_UART1_BASE

 #define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE		0x04000300

 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	19

 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_FLASH_LEGACY_512Kx16

 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
 #define NAND_ALLOW_ERASE_ALL		1

 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_DRIVER_OMAP1510_I2C

 #define CONFIG_RTC_DS1307
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68


 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 /*
  * Partitions (mtdparts command line support)
  */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=gen_nand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=" \
 	"physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \
 	"gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"

 /*
  * Command line configuration
  */
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_BOOTD
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
 #define CONFIG_CMD_LOADB
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_RUN

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH

 #define CONFIG_LOOPW

 #define CONFIG_BOOTDELAY	3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs*/
 #define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
 #define CONFIG_BOOTCOMMAND	"run fboot"
 #define CONFIG_PREBOOT		"run setup"
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"autostart=yes\0"						\
 	"ospart=0\0"							\
 	"setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0"	\
 	"setpart="							\
 	"if test -n $swapos; then "					\
 		"setenv swapos; saveenv; "				\
 		"if test $ospart -eq 0; then "				\
 			"setenv ospart 1; "				\
 		"else "							\
 			"setenv ospart 0; "				\
 		"fi; "							\
 	"fi\0"								\
 	"nfsargs=setenv bootargs $bootargs "				\
 		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
 		"nfsroot=$rootpath root=/dev/nfs\0"			\
 	"flashargs=run setpart;setenv bootargs $bootargs "		\
 		"root=mtd:rootfs$ospart ro "				\
 		"rootfstype=jffs2\0"					\
 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0"	\
 	"fboot=run flashargs;nboot kernel$ospart\0"			\
 	"nboot=bootp;run nfsargs;tftp\0"

 #if 0	/* feel free to disable for development */
 #define	CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
 #define CONFIG_AUTOBOOT_PROMPT		\
 	"\nNetStar PBX - boot in %d secs...\n", bootdelay
 #define CONFIG_AUTOBOOT_DELAY_STR	"."	/* 1st "password"	*/
 #endif

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT		"# "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 	 sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_AUTO_COMPLETE

 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
 	(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)

 #define CONFIG_SYS_LOAD_ADDR		(PHYS_SDRAM_1 + 0x400000)

 /* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE		OMAP1510_TIMER1_BASE
 #define CONFIG_SYS_PTV			7
 #define CONFIG_SYS_HZ			1000

 #define OMAP5910_DPLL_DIV		1
 #define OMAP5910_DPLL_MUL		\
 	((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)

 #define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
 #define OMAP5910_LCD_DIV	2	/* CKL/4 */
 #define OMAP5910_ARM_DIV	0	/* CKL/1 */
 #define OMAP5910_DSP_DIV	0	/* CKL/1 */
 #define OMAP5910_TC_DIV		1	/* CKL/2 */
 #define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
 #define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */

 #define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b */
 #define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
 				 (OMAP5910_LCD_DIV << 2) |	\
 				 (OMAP5910_ARM_DIV << 4) |	\
 				 (OMAP5910_DSP_DIV << 6) |	\
 				 (OMAP5910_TC_DIV << 8) |	\
 				 (OMAP5910_DSP_MMU_DIV << 10) |	\
 				 (OMAP5910_ARM_TIM_SEL << 12))

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
	*
	* Configuation settings for the TI OMAP NetStar board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <configs/omap1510.h>

	#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
	#define CONFIG_OMAP 1 /* in a TI OMAP core */
	#define CONFIG_OMAP1510 1 /* which is in a 5910 */

	/* Input clock of PLL */
	#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
	#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */

	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

	#define CONFIG_MISC_INIT_R /* There is nothing to really init */
	#define BOARD_LATE_INIT /* but we flash the LEDs here */

	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
	#define CONFIG_SYS_CONSOLE_INFO_QUIET

	/*
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 0x10000000
	#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
	#define PHYS_FLASH_1 0x00000000

	#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MONITOR_LEN (256 * 1024)

	/*
	* Environment settings
	*/
	#define CONFIG_ENV_IS_IN_FLASH
	#define CONFIG_ENV_ADDR 0x4000
	#define CONFIG_ENV_SIZE (8 * 1024)
	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	#define CONFIG_ENV_ADDR_REDUND 0x6000
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	#define CONFIG_ENV_OVERWRITE

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)

	/*
	* The stack size is set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (1 * 1024 * 1024)

	/*
	* Hardware drivers
	*/
	#define CONFIG_SYS_NS16550
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
	#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE

	#define CONFIG_NET_MULTI
	#define CONFIG_SMC91111
	#define CONFIG_SMC91111_BASE 0x04000300

	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_MAX_FLASH_SECT 19

	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	#define CONFIG_FLASH_CFI_LEGACY
	#define CONFIG_SYS_FLASH_LEGACY_512Kx16

	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
	#define NAND_ALLOW_ERASE_ALL 1

	#define CONFIG_HARD_I2C
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SLAVE 1
	#define CONFIG_DRIVER_OMAP1510_I2C

	#define CONFIG_RTC_DS1307
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68


	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	/*
	* Partitions (mtdparts command line support)
	*/
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_MTD_DEVICE
	#define CONFIG_FLASH_CFI_MTD
	#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0"
	#define MTDPARTS_DEFAULT "mtdparts=" \
	"physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \
	"gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"

	/*
	* Command line configuration
	*/
	#define CONFIG_CMD_BDI
	#define CONFIG_CMD_BOOTD
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_SAVEENV
	#define CONFIG_CMD_FLASH
	#define CONFIG_CMD_IMI
	#define CONFIG_CMD_LOADB
	#define CONFIG_CMD_MEMORY
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_RUN

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_BOOTPATH

	#define CONFIG_LOOPW

	#define CONFIG_BOOTDELAY 3
	#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
	#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
	#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
	#define CONFIG_BOOTCOMMAND "run fboot"
	#define CONFIG_PREBOOT "run setup"
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"autostart=yes\0" \
	"ospart=0\0" \
	"setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0" \
	"setpart=" \
	"if test -n $swapos; then " \
	"setenv swapos; saveenv; " \
	"if test $ospart -eq 0; then " \
	"setenv ospart 1; " \
	"else " \
	"setenv ospart 0; " \
	"fi; " \
	"fi\0" \
	"nfsargs=setenv bootargs $bootargs " \
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
	"nfsroot=$rootpath root=/dev/nfs\0" \
	"flashargs=run setpart;setenv bootargs $bootargs " \
	"root=mtd:rootfs$ospart ro " \
	"rootfstype=jffs2\0" \
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
	"fboot=run flashargs;nboot kernel$ospart\0" \
	"nboot=bootp;run nfsargs;tftp\0"

	#if 0 /* feel free to disable for development */
	#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
	#define CONFIG_AUTOBOOT_PROMPT \
	"\nNetStar PBX - boot in %d secs...\n", bootdelay
	#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
	#endif

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_SYS_PROMPT "# "
	#define CONFIG_SYS_CBSIZE 256
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	#define CONFIG_AUTO_COMPLETE

	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
	#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
	(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)

	#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)

	/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
	* This time is further subdivided by a local divisor.
	*/
	#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
	#define CONFIG_SYS_PTV 7
	#define CONFIG_SYS_HZ 1000

	#define OMAP5910_DPLL_DIV 1
	#define OMAP5910_DPLL_MUL \
	((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)

	#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
	#define OMAP5910_LCD_DIV 2 /* CKL/4 */
	#define OMAP5910_ARM_DIV 0 /* CKL/1 */
	#define OMAP5910_DSP_DIV 0 /* CKL/1 */
	#define OMAP5910_TC_DIV 1 /* CKL/2 */
	#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
	#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */

	#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */
	#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) \| \
	(OMAP5910_LCD_DIV << 2) \| \
	(OMAP5910_ARM_DIV << 4) \| \
	(OMAP5910_DSP_DIV << 6) \| \
	(OMAP5910_TC_DIV << 8) \| \
	(OMAP5910_DSP_MMU_DIV << 10) \| \
	(OMAP5910_ARM_TIM_SEL << 12))

	#endif /* __CONFIG_H */