| /* |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| * Dave Liu <daveliu@freescale.com> |
| * |
| * Copyright (C) 2007 Logic Product Development, Inc. |
| * Peter Barada <peterb@logicpd.com> |
| * |
| * Copyright (C) 2007 MontaVista Software, Inc. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * (C) Copyright 2010 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| */ |
| |
| /* This needs to be set prior to including km/km83xx-common.h */ |
| #define CONFIG_SYS_TEXT_BASE 0xF0000000 |
| |
| #if defined(CONFIG_SUVD3) /* SUVD3 board specific */ |
| #define CONFIG_HOSTNAME suvd3 |
| #define CONFIG_KM_BOARD_NAME "suvd3" |
| /* include common defines/options for all 8321 Keymile boards */ |
| #include "km/km8321-common.h" |
| |
| #elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ |
| #define CONFIG_HOSTNAME kmvect1 |
| #define CONFIG_KM_BOARD_NAME "kmvect1" |
| /* at end of uboot partition, before env */ |
| #define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 |
| /* include common defines/options for all 8309 Keymile boards */ |
| #include "km/km8309-common.h" |
| |
| #elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ |
| #define CONFIG_HOSTNAME kmtegr1 |
| #define CONFIG_KM_BOARD_NAME "kmtegr1" |
| #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" |
| #define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" |
| #define MTDIDS_DEFAULT "nor0=boot,nand0=app" |
| #define MTDPARTS_DEFAULT "mtdparts=" \ |
| "boot:" \ |
| "768k(u-boot)," \ |
| "256k(qe-fw)," \ |
| "128k(env)," \ |
| "128k(envred)," \ |
| "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" \ |
| "app:" \ |
| "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");" |
| |
| #define CONFIG_ENV_ADDR 0xF0100000 |
| #define CONFIG_ENV_OFFSET 0x100000 |
| |
| #define CONFIG_CMD_NAND |
| #define CONFIG_NAND_ECC_BCH |
| #define CONFIG_BCH |
| #define CONFIG_NAND_KMETER1 |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define NAND_MAX_CHIPS 1 |
| |
| /* include common defines/options for all 8309 Keymile boards */ |
| #include "km/km8309-common.h" |
| /* must be after the include because KMBEC_FPGA is otherwise undefined */ |
| #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ |
| |
| #else |
| #error Supported boards are: SUVD3, KMVECT1, KMTEGR1 |
| #endif |
| |
| #define CONFIG_SYS_APP1_BASE 0xA0000000 |
| #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ |
| #define CONFIG_SYS_APP2_BASE 0xB0000000 |
| #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ |
| |
| /* EEprom support */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| |
| /* |
| * Init Local Bus Memory Controller: |
| * |
| * Bank Bus Machine PortSz Size Device |
| * ---- --- ------- ------ ----- ------ |
| * 2 Local UPMA 16 bit 256MB APP1 |
| * 3 Local GPCM 16 bit 256MB APP2 |
| * |
| */ |
| |
| #if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) |
| /* |
| * APP1 on the local bus CS2 |
| */ |
| #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE |
| #define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) |
| |
| #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ |
| BR_PS_16 | \ |
| BR_MS_UPMA | \ |
| BR_V) |
| #define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) |
| |
| #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ |
| BR_PS_16 | \ |
| BR_V) |
| |
| #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ |
| OR_GPCM_CSNT | \ |
| OR_GPCM_ACS_DIV4 | \ |
| OR_GPCM_SCY_3 | \ |
| OR_GPCM_TRLX_SET) |
| |
| #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ |
| 0x0000c000 | \ |
| MxMR_WLFx_2X) |
| |
| #elif defined(CONFIG_KMTEGR1) |
| #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ |
| BR_PS_16 | \ |
| BR_MS_GPCM | \ |
| BR_V) |
| |
| #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ |
| OR_GPCM_SCY_5 | \ |
| OR_GPCM_TRLX_CLEAR | \ |
| OR_GPCM_EHTR_CLEAR) |
| |
| #endif /* CONFIG_KMTEGR1 */ |
| |
| #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE |
| #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) |
| |
| /* |
| * MMU Setup |
| */ |
| #if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) |
| /* APP1: icache cacheable, but dcache-inhibit and guarded */ |
| #define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ |
| BATL_MEMCOHERENCE) |
| #define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ |
| BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ |
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U |
| |
| #elif defined(CONFIG_KMTEGR1) |
| #define CONFIG_SYS_IBAT5L (0) |
| #define CONFIG_SYS_IBAT5U (0) |
| #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L |
| #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U |
| #endif /* CONFIG_KMTEGR1 */ |
| |
| #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ |
| BATL_MEMCOHERENCE) |
| #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ |
| BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ |
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U |
| |
| /* |
| * QE UEC ethernet configuration |
| */ |
| #if defined(CONFIG_KMVECT1) |
| #define CONFIG_MV88E6352_SWITCH |
| #define CONFIG_KM_MVEXTSW_ADDR 0x10 |
| |
| /* ethernet port connected to simple switch 88e6122 (UEC0) */ |
| #define CONFIG_UEC_ETH1 |
| #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ |
| #define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 |
| #define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 |
| |
| #define CONFIG_FIXED_PHY 0xFFFFFFFF |
| #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ |
| #define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ |
| {devnum, speed, duplex} |
| #define CONFIG_SYS_FIXED_PHY_PORTS \ |
| CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) |
| |
| #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH |
| #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR |
| #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII |
| #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 |
| #endif /* CONFIG_KMVECT1 */ |
| |
| #if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) |
| /* ethernet port connected to piggy (UEC2) */ |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_UEC_ETH2 |
| #define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ |
| #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ |
| #define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 |
| #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH |
| #define CONFIG_SYS_UEC2_PHY_ADDR 0 |
| #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII |
| #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 |
| #endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */ |
| |
| #endif /* __CONFIG_H */ |