board/renesas/sh7757lcr/sh7757lcr.c - github/trini/u-boot - Gitiles

 /*
  * Copyright (C) 2011  Renesas Solutions Corp.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <malloc.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/mmc.h>
 #include <spi.h>
 #include <spi_flash.h>

 int checkboard(void)
 {
 	puts("BOARD: R0P7757LC0030RL board\n");

 	return 0;
 }

 static void init_gctrl(void)
 {
 	struct gctrl_regs *gctrl = GCTRL_BASE;
 	unsigned long graofst;

 	graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
 	writel(graofst | 0x20000f00, &gctrl->gracr3);
 }

 static int init_pcie_bridge_from_spi(void *buf, size_t size)
 {
 	struct spi_flash *spi;
 	int ret;
 	unsigned long pcie_addr;

 	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
 	if (!spi) {
 		printf("%s: spi_flash probe error.\n", __func__);
 		return 1;
 	}

 	if (is_sh7757_b0())
 		pcie_addr = SH7757LCR_PCIEBRG_ADDR_B0;
 	else
 		pcie_addr = SH7757LCR_PCIEBRG_ADDR;

 	ret = spi_flash_read(spi, pcie_addr, size, buf);
 	if (ret) {
 		printf("%s: spi_flash read error.\n", __func__);
 		spi_flash_free(spi);
 		return 1;
 	}
 	spi_flash_free(spi);

 	return 0;
 }

 static void init_pcie_bridge(void)
 {
 	struct pciebrg_regs *pciebrg = PCIEBRG_BASE;
 	struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
 	int i;
 	unsigned char *data;
 	unsigned short tmp;
 	unsigned long pcie_size;

 	if (!(readw(&pciebrg->ctrl_h8s) & 0x0001))
 		return;

 	if (is_sh7757_b0())
 		pcie_size = SH7757LCR_PCIEBRG_SIZE_B0;
 	else
 		pcie_size = SH7757LCR_PCIEBRG_SIZE;

 	data = malloc(pcie_size);
 	if (!data) {
 		printf("%s: malloc error.\n", __func__);
 		return;
 	}
 	if (init_pcie_bridge_from_spi(data, pcie_size)) {
 		free(data);
 		return;
 	}

 	if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff &&
 	    data[3] == 0xff) {
 		free(data);
 		printf("%s: skipped initialization\n", __func__);
 		return;
 	}

 	writew(0xa501, &pciebrg->ctrl_h8s);	/* reset */
 	writew(0x0000, &pciebrg->cp_ctrl);
 	writew(0x0000, &pciebrg->cp_addr);

 	for (i = 0; i < pcie_size; i += 2) {
 		tmp = (data[i] << 8) | data[i + 1];
 		writew(tmp, &pciebrg->cp_data);
 	}

 	writew(0xa500, &pciebrg->ctrl_h8s);	/* start */
 	if (!is_sh7757_b0())
 		writel(0x00000001, &pcie_setup->pbictl3);

 	free(data);
 }

 static void init_usb_phy(void)
 {
 	struct usb_common_regs *common0 = USB0_COMMON_BASE;
 	struct usb_common_regs *common1 = USB1_COMMON_BASE;
 	struct usb0_phy_regs *phy = USB0_PHY_BASE;
 	struct usb1_port_regs *port = USB1_PORT_BASE;
 	struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;

 	writew(0x0100, &phy->reset);		/* set reset */
 	/* port0 = USB0, port1 = USB1 */
 	writew(0x0002, &phy->portsel);
 	writel(0x0001, &port->port1sel);	/* port1 = Host */
 	writew(0x0111, &phy->reset);		/* clear reset */

 	writew(0x4000, &common0->suspmode);
 	writew(0x4000, &common1->suspmode);

 #if defined(__LITTLE_ENDIAN)
 	writel(0x00000000, &align->ehcidatac);
 	writel(0x00000000, &align->ohcidatac);
 #endif
 }

 static void set_mac_to_sh_eth_register(int channel, char *mac_string)
 {
 	struct ether_mac_regs *ether;
 	unsigned char mac[6];
 	unsigned long val;

 	eth_parse_enetaddr(mac_string, mac);

 	if (!channel)
 		ether = ETHER0_MAC_BASE;
 	else
 		ether = ETHER1_MAC_BASE;

 	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
 	writel(val, &ether->mahr);
 	val = (mac[4] << 8) | mac[5];
 	writel(val, &ether->malr);
 }

 static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
 {
 	struct ether_mac_regs *ether;
 	unsigned char mac[6];
 	unsigned long val;

 	eth_parse_enetaddr(mac_string, mac);

 	if (!channel)
 		ether = GETHER0_MAC_BASE;
 	else
 		ether = GETHER1_MAC_BASE;

 	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
 	writel(val, &ether->mahr);
 	val = (mac[4] << 8) | mac[5];
 	writel(val, &ether->malr);
 }

 /*****************************************************************
  * This PMB must be set on this timing. The lowlevel_init is run on
  * Area 0(phys 0x00000000), so we have to map it.
  *
  * The new PMB table is following:
  * ent	virt		phys		v	sz	c	wt
  * 0	0xa0000000	0x40000000	1	128M	0	1
  * 1	0xa8000000	0x48000000	1	128M	0	1
  * 2	0xb0000000	0x50000000	1	128M	0	1
  * 3	0xb8000000	0x58000000	1	128M	0	1
  * 4	0x80000000	0x40000000	1	128M	1	1
  * 5	0x88000000	0x48000000	1	128M	1	1
  * 6	0x90000000	0x50000000	1	128M	1	1
  * 7	0x98000000	0x58000000	1	128M	1	1
  */
 static void set_pmb_on_board_init(void)
 {
 	struct mmu_regs *mmu = MMU_BASE;

 	/* clear ITLB */
 	writel(0x00000004, &mmu->mmucr);

 	/* delete PMB for SPIBOOT */
 	writel(0, PMB_ADDR_BASE(0));
 	writel(0, PMB_DATA_BASE(0));

 	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
 	/*			ppn  ub v s1 s0  c  wt */
 	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
 	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
 	writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
 	writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
 	writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
 	writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
 	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
 	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
 	writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
 	writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
 	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
 	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
 }

 int board_init(void)
 {
 	struct gether_control_regs *gether = GETHER_CONTROL_BASE;

 	set_pmb_on_board_init();

 	/* enable RMII's MDIO (disable GRMII's MDIO) */
 	writel(0x00030000, &gether->gbecont);

 	init_gctrl();
 	init_usb_phy();

 	return 0;
 }

 int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;

 	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
 	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
 	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	printf("    Physical address\n");
 	printf("    0x%08x - 0x%08x : Accessible Space as ECC Area\n",
 		SH7757LCR_SDRAM_PHYS_TOP,
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE - 1);
 	printf("    0x%08x - 0x%08x : No Access Area\n",
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE,
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE * 2 - 1);
 	printf("    0x%08x - 0x%08x : Non-ECC Area for DVC/AVC\n",
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2,
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2 +
 			SH7757LCR_SDRAM_DVC_SIZE - 1);
 	printf("    0x%08x - 0x%08x : Non-ECC Area for G200eR2\n",
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET,
 		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET + 0x00ffffff);

 	return 0;
 }

 int board_mmc_init(bd_t *bis)
 {
 	return mmcif_mmc_init();
 }

 static int get_sh_eth_mac_raw(unsigned char *buf, int size)
 {
 	struct spi_flash *spi;
 	int ret;

 	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
 	if (spi == NULL) {
 		printf("%s: spi_flash probe error.\n", __func__);
 		return 1;
 	}

 	ret = spi_flash_read(spi, SH7757LCR_ETHERNET_MAC_BASE, size, buf);
 	if (ret) {
 		printf("%s: spi_flash read error.\n", __func__);
 		spi_flash_free(spi);
 		return 1;
 	}
 	spi_flash_free(spi);

 	return 0;
 }

 static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
 {
 	memcpy(mac_string, &buf[channel * (SH7757LCR_ETHERNET_MAC_SIZE + 1)],
 		SH7757LCR_ETHERNET_MAC_SIZE);
 	mac_string[SH7757LCR_ETHERNET_MAC_SIZE] = 0x00;	/* terminate */

 	return 0;
 }

 static void init_ethernet_mac(void)
 {
 	char mac_string[64];
 	char env_string[64];
 	int i;
 	unsigned char *buf;

 	buf = malloc(256);
 	if (!buf) {
 		printf("%s: malloc error.\n", __func__);
 		return;
 	}
 	get_sh_eth_mac_raw(buf, 256);

 	/* Fast Ethernet */
 	for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) {
 		get_sh_eth_mac(i, mac_string, buf);
 		if (i == 0)
 			setenv("ethaddr", mac_string);
 		else {
 			sprintf(env_string, "eth%daddr", i);
 			setenv(env_string, mac_string);
 		}

 		set_mac_to_sh_eth_register(i, mac_string);
 	}

 	/* Gigabit Ethernet */
 	for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) {
 		get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf);
 		sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH);
 		setenv(env_string, mac_string);

 		set_mac_to_sh_giga_eth_register(i, mac_string);
 	}

 	free(buf);
 }

 static void init_pcie(void)
 {
 	struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
 	struct pcie_system_bus_regs *pcie_sysbus = PCIE_SYSTEM_BUS_BASE;

 	writel(0x00000ff2, &pcie_setup->ladmsk0);
 	writel(0x00000001, &pcie_setup->barmap);
 	writel(0xffcaa000, &pcie_setup->lad0);
 	writel(0x00030000, &pcie_sysbus->endictl0);
 	writel(0x00000003, &pcie_sysbus->endictl1);
 	writel(0x00000004, &pcie_setup->pbictl2);
 }

 static void finish_spiboot(void)
 {
 	struct gctrl_regs *gctrl = GCTRL_BASE;
 	/*
 	 *  SH7757 B0 does not use LBSC.
 	 *  So if we set SPIBOOTCAN to 1, SH7757 can not access Area0.
 	 *  This setting is not cleared by manual reset, So we have to set it
 	 *  to 0.
 	 */
 	writel(0x00000000, &gctrl->spibootcan);
 }

 int board_late_init(void)
 {
 	init_ethernet_mac();
 	init_pcie_bridge();
 	init_pcie();
 	finish_spiboot();

 	return 0;
 }

 int do_sh_g200(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	struct gctrl_regs *gctrl = GCTRL_BASE;
 	unsigned long graofst;

 	writel(0xfedcba98, &gctrl->wprotect);
 	graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
 	writel(graofst | 0xa0000f00, &gctrl->gracr3);

 	return 0;
 }

 U_BOOT_CMD(
 	sh_g200,	1,	1,	do_sh_g200,
 	"enable sh-g200",
 	"enable SH-G200 bus (disable PCIe-G200)"
 );

 int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i, ret;
 	char mac_string[256];
 	struct spi_flash *spi;
 	unsigned char *buf;

 	if (argc != 5) {
 		buf = malloc(256);
 		if (!buf) {
 			printf("%s: malloc error.\n", __func__);
 			return 1;
 		}

 		get_sh_eth_mac_raw(buf, 256);

 		/* print current MAC address */
 		for (i = 0; i < 4; i++) {
 			get_sh_eth_mac(i, mac_string, buf);
 			if (i < 2)
 				printf(" ETHERC ch%d = %s\n", i, mac_string);
 			else
 				printf("GETHERC ch%d = %s\n", i-2, mac_string);
 		}
 		free(buf);
 		return 0;
 	}

 	/* new setting */
 	memset(mac_string, 0xff, sizeof(mac_string));
 	sprintf(mac_string, "%s\t%s\t%s\t%s",
 		argv[1], argv[2], argv[3], argv[4]);

 	/* write MAC data to SPI rom */
 	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
 	if (!spi) {
 		printf("%s: spi_flash probe error.\n", __func__);
 		return 1;
 	}

 	ret = spi_flash_erase(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
 				SH7757LCR_SPI_SECTOR_SIZE);
 	if (ret) {
 		printf("%s: spi_flash erase error.\n", __func__);
 		return 1;
 	}

 	ret = spi_flash_write(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
 				sizeof(mac_string), mac_string);
 	if (ret) {
 		printf("%s: spi_flash write error.\n", __func__);
 		spi_flash_free(spi);
 		return 1;
 	}
 	spi_flash_free(spi);

 	puts("The writing of the MAC address to SPI ROM was completed.\n");

 	return 0;
 }

 U_BOOT_CMD(
 	write_mac,	5,	1,	do_write_mac,
 	"write MAC address for ETHERC/GETHERC",
 	"[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n"
 );
	/*
	* Copyright (C) 2011 Renesas Solutions Corp.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <malloc.h>
	#include <asm/processor.h>
	#include <asm/io.h>
	#include <asm/mmc.h>
	#include <spi.h>
	#include <spi_flash.h>

	int checkboard(void)
	{
	puts("BOARD: R0P7757LC0030RL board\n");

	return 0;
	}

	static void init_gctrl(void)
	{
	struct gctrl_regs *gctrl = GCTRL_BASE;
	unsigned long graofst;

	graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
	writel(graofst \| 0x20000f00, &gctrl->gracr3);
	}

	static int init_pcie_bridge_from_spi(void *buf, size_t size)
	{
	struct spi_flash *spi;
	int ret;
	unsigned long pcie_addr;

	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
	if (!spi) {
	printf("%s: spi_flash probe error.\n", __func__);
	return 1;
	}

	if (is_sh7757_b0())
	pcie_addr = SH7757LCR_PCIEBRG_ADDR_B0;
	else
	pcie_addr = SH7757LCR_PCIEBRG_ADDR;

	ret = spi_flash_read(spi, pcie_addr, size, buf);
	if (ret) {
	printf("%s: spi_flash read error.\n", __func__);
	spi_flash_free(spi);
	return 1;
	}
	spi_flash_free(spi);

	return 0;
	}

	static void init_pcie_bridge(void)
	{
	struct pciebrg_regs *pciebrg = PCIEBRG_BASE;
	struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
	int i;
	unsigned char *data;
	unsigned short tmp;
	unsigned long pcie_size;

	if (!(readw(&pciebrg->ctrl_h8s) & 0x0001))
	return;

	if (is_sh7757_b0())
	pcie_size = SH7757LCR_PCIEBRG_SIZE_B0;
	else
	pcie_size = SH7757LCR_PCIEBRG_SIZE;

	data = malloc(pcie_size);
	if (!data) {
	printf("%s: malloc error.\n", __func__);
	return;
	}
	if (init_pcie_bridge_from_spi(data, pcie_size)) {
	free(data);
	return;
	}

	if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff &&
	data[3] == 0xff) {
	free(data);
	printf("%s: skipped initialization\n", __func__);
	return;
	}

	writew(0xa501, &pciebrg->ctrl_h8s); /* reset */
	writew(0x0000, &pciebrg->cp_ctrl);
	writew(0x0000, &pciebrg->cp_addr);

	for (i = 0; i < pcie_size; i += 2) {
	tmp = (data[i] << 8) \| data[i + 1];
	writew(tmp, &pciebrg->cp_data);
	}

	writew(0xa500, &pciebrg->ctrl_h8s); /* start */
	if (!is_sh7757_b0())
	writel(0x00000001, &pcie_setup->pbictl3);

	free(data);
	}

	static void init_usb_phy(void)
	{
	struct usb_common_regs *common0 = USB0_COMMON_BASE;
	struct usb_common_regs *common1 = USB1_COMMON_BASE;
	struct usb0_phy_regs *phy = USB0_PHY_BASE;
	struct usb1_port_regs *port = USB1_PORT_BASE;
	struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;

	writew(0x0100, &phy->reset); /* set reset */
	/* port0 = USB0, port1 = USB1 */
	writew(0x0002, &phy->portsel);
	writel(0x0001, &port->port1sel); /* port1 = Host */
	writew(0x0111, &phy->reset); /* clear reset */

	writew(0x4000, &common0->suspmode);
	writew(0x4000, &common1->suspmode);

	#if defined(__LITTLE_ENDIAN)
	writel(0x00000000, &align->ehcidatac);
	writel(0x00000000, &align->ohcidatac);
	#endif
	}

	static void set_mac_to_sh_eth_register(int channel, char *mac_string)
	{
	struct ether_mac_regs *ether;
	unsigned char mac[6];
	unsigned long val;

	eth_parse_enetaddr(mac_string, mac);

	if (!channel)
	ether = ETHER0_MAC_BASE;
	else
	ether = ETHER1_MAC_BASE;

	val = (mac[0] << 24) \| (mac[1] << 16) \| (mac[2] << 8) \| mac[3];
	writel(val, &ether->mahr);
	val = (mac[4] << 8) \| mac[5];
	writel(val, &ether->malr);
	}

	static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
	{
	struct ether_mac_regs *ether;
	unsigned char mac[6];
	unsigned long val;

	eth_parse_enetaddr(mac_string, mac);

	if (!channel)
	ether = GETHER0_MAC_BASE;
	else
	ether = GETHER1_MAC_BASE;

	val = (mac[0] << 24) \| (mac[1] << 16) \| (mac[2] << 8) \| mac[3];
	writel(val, &ether->mahr);
	val = (mac[4] << 8) \| mac[5];
	writel(val, &ether->malr);
	}

	/*****************************************************************
	* This PMB must be set on this timing. The lowlevel_init is run on
	* Area 0(phys 0x00000000), so we have to map it.
	*
	* The new PMB table is following:
	* ent virt phys v sz c wt
	* 0 0xa0000000 0x40000000 1 128M 0 1
	* 1 0xa8000000 0x48000000 1 128M 0 1
	* 2 0xb0000000 0x50000000 1 128M 0 1
	* 3 0xb8000000 0x58000000 1 128M 0 1
	* 4 0x80000000 0x40000000 1 128M 1 1
	* 5 0x88000000 0x48000000 1 128M 1 1
	* 6 0x90000000 0x50000000 1 128M 1 1
	* 7 0x98000000 0x58000000 1 128M 1 1
	*/
	static void set_pmb_on_board_init(void)
	{
	struct mmu_regs *mmu = MMU_BASE;

	/* clear ITLB */
	writel(0x00000004, &mmu->mmucr);

	/* delete PMB for SPIBOOT */
	writel(0, PMB_ADDR_BASE(0));
	writel(0, PMB_DATA_BASE(0));

	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
	/* ppn ub v s1 s0 c wt */
	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
	writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
	writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
	writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
	writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
	writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
	writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
	}

	int board_init(void)
	{
	struct gether_control_regs *gether = GETHER_CONTROL_BASE;

	set_pmb_on_board_init();

	/* enable RMII's MDIO (disable GRMII's MDIO) */
	writel(0x00030000, &gether->gbecont);

	init_gctrl();
	init_usb_phy();

	return 0;
	}

	int dram_init(void)
	{
	DECLARE_GLOBAL_DATA_PTR;

	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
	printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
	printf(" Physical address\n");
	printf(" 0x%08x - 0x%08x : Accessible Space as ECC Area\n",
	SH7757LCR_SDRAM_PHYS_TOP,
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE - 1);
	printf(" 0x%08x - 0x%08x : No Access Area\n",
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE,
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE * 2 - 1);
	printf(" 0x%08x - 0x%08x : Non-ECC Area for DVC/AVC\n",
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2,
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2 +
	SH7757LCR_SDRAM_DVC_SIZE - 1);
	printf(" 0x%08x - 0x%08x : Non-ECC Area for G200eR2\n",
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET,
	SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET + 0x00ffffff);

	return 0;
	}

	int board_mmc_init(bd_t *bis)
	{
	return mmcif_mmc_init();
	}

	static int get_sh_eth_mac_raw(unsigned char *buf, int size)
	{
	struct spi_flash *spi;
	int ret;

	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
	if (spi == NULL) {
	printf("%s: spi_flash probe error.\n", __func__);
	return 1;
	}

	ret = spi_flash_read(spi, SH7757LCR_ETHERNET_MAC_BASE, size, buf);
	if (ret) {
	printf("%s: spi_flash read error.\n", __func__);
	spi_flash_free(spi);
	return 1;
	}
	spi_flash_free(spi);

	return 0;
	}

	static int get_sh_eth_mac(int channel, char mac_string, unsigned char buf)
	{
	memcpy(mac_string, &buf[channel * (SH7757LCR_ETHERNET_MAC_SIZE + 1)],
	SH7757LCR_ETHERNET_MAC_SIZE);
	mac_string[SH7757LCR_ETHERNET_MAC_SIZE] = 0x00; /* terminate */

	return 0;
	}

	static void init_ethernet_mac(void)
	{
	char mac_string[64];
	char env_string[64];
	int i;
	unsigned char *buf;

	buf = malloc(256);
	if (!buf) {
	printf("%s: malloc error.\n", __func__);
	return;
	}
	get_sh_eth_mac_raw(buf, 256);

	/* Fast Ethernet */
	for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) {
	get_sh_eth_mac(i, mac_string, buf);
	if (i == 0)
	setenv("ethaddr", mac_string);
	else {
	sprintf(env_string, "eth%daddr", i);
	setenv(env_string, mac_string);
	}

	set_mac_to_sh_eth_register(i, mac_string);
	}

	/* Gigabit Ethernet */
	for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) {
	get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf);
	sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH);
	setenv(env_string, mac_string);

	set_mac_to_sh_giga_eth_register(i, mac_string);
	}

	free(buf);
	}

	static void init_pcie(void)
	{
	struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
	struct pcie_system_bus_regs *pcie_sysbus = PCIE_SYSTEM_BUS_BASE;

	writel(0x00000ff2, &pcie_setup->ladmsk0);
	writel(0x00000001, &pcie_setup->barmap);
	writel(0xffcaa000, &pcie_setup->lad0);
	writel(0x00030000, &pcie_sysbus->endictl0);
	writel(0x00000003, &pcie_sysbus->endictl1);
	writel(0x00000004, &pcie_setup->pbictl2);
	}

	static void finish_spiboot(void)
	{
	struct gctrl_regs *gctrl = GCTRL_BASE;
	/*
	* SH7757 B0 does not use LBSC.
	* So if we set SPIBOOTCAN to 1, SH7757 can not access Area0.
	* This setting is not cleared by manual reset, So we have to set it
	* to 0.
	*/
	writel(0x00000000, &gctrl->spibootcan);
	}

	int board_late_init(void)
	{
	init_ethernet_mac();
	init_pcie_bridge();
	init_pcie();
	finish_spiboot();

	return 0;
	}

	int do_sh_g200(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	struct gctrl_regs *gctrl = GCTRL_BASE;
	unsigned long graofst;

	writel(0xfedcba98, &gctrl->wprotect);
	graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
	writel(graofst \| 0xa0000f00, &gctrl->gracr3);

	return 0;
	}

	U_BOOT_CMD(
	sh_g200, 1, 1, do_sh_g200,
	"enable sh-g200",
	"enable SH-G200 bus (disable PCIe-G200)"
	);

	int do_write_mac(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	int i, ret;
	char mac_string[256];
	struct spi_flash *spi;
	unsigned char *buf;

	if (argc != 5) {
	buf = malloc(256);
	if (!buf) {
	printf("%s: malloc error.\n", __func__);
	return 1;
	}

	get_sh_eth_mac_raw(buf, 256);

	/* print current MAC address */
	for (i = 0; i < 4; i++) {
	get_sh_eth_mac(i, mac_string, buf);
	if (i < 2)
	printf(" ETHERC ch%d = %s\n", i, mac_string);
	else
	printf("GETHERC ch%d = %s\n", i-2, mac_string);
	}
	free(buf);
	return 0;
	}

	/* new setting */
	memset(mac_string, 0xff, sizeof(mac_string));
	sprintf(mac_string, "%s\t%s\t%s\t%s",
	argv[1], argv[2], argv[3], argv[4]);

	/* write MAC data to SPI rom */
	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
	if (!spi) {
	printf("%s: spi_flash probe error.\n", __func__);
	return 1;
	}

	ret = spi_flash_erase(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
	SH7757LCR_SPI_SECTOR_SIZE);
	if (ret) {
	printf("%s: spi_flash erase error.\n", __func__);
	return 1;
	}

	ret = spi_flash_write(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
	sizeof(mac_string), mac_string);
	if (ret) {
	printf("%s: spi_flash write error.\n", __func__);
	spi_flash_free(spi);
	return 1;
	}
	spi_flash_free(spi);

	puts("The writing of the MAC address to SPI ROM was completed.\n");

	return 0;
	}

	U_BOOT_CMD(
	write_mac, 5, 1, do_write_mac,
	"write MAC address for ETHERC/GETHERC",
	"[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n"
	);