board/freescale/mx53ard/mx53ard.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2011 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/iomux-mx53.h>
 #include <asm/errno.h>
 #include <netdev.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <asm/gpio.h>

 #define ETHERNET_INT		IMX_GPIO_NR(2, 31)

 DECLARE_GLOBAL_DATA_PTR;

 int dram_init(void)
 {
 	u32 size1, size2;

 	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
 	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);

 	gd->ram_size = size1 + size2;

 	return 0;
 }
 void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
 }

 #ifdef CONFIG_NAND_MXC
 static void setup_iomux_nand(void)
 {
 	static const iomux_v3_cfg_t nand_pads[] = {
 		NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
 				PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1,
 				PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
 				PAD_CTL_PUS_100K_UP),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
 				PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
 				PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
 				PAD_CTL_PUS_100K_UP),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
 				PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
 				PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 	};

 	u32 i, reg;

 	reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
 	reg &= ~M4IF_GENP_WEIM_MM_MASK;
 	__raw_writel(reg, M4IF_BASE_ADDR + 0xc);
 	for (i = 0x4; i < 0x94; i += 0x18) {
 		reg = __raw_readl(WEIM_BASE_ADDR + i);
 		reg &= ~WEIM_GCR2_MUX16_BYP_GRANT_MASK;
 		__raw_writel(reg, WEIM_BASE_ADDR + i);
 	}

 	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
 }
 #else
 static void setup_iomux_nand(void)
 {
 }
 #endif

 #define UART_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
 			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)

 static void setup_iomux_uart(void)
 {
 	static const iomux_v3_cfg_t uart_pads[] = {
 		NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL),
 	};

 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 }

 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC2_BASE_ADDR},
 };

 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 	int ret;

 	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
 	gpio_direction_input(IMX_GPIO_NR(1, 1));
 	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4);
 	gpio_direction_input(IMX_GPIO_NR(1, 4));

 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		ret = !gpio_get_value(IMX_GPIO_NR(1, 1));
 	else
 		ret = !gpio_get_value(IMX_GPIO_NR(1, 4));

 	return ret;
 }

 #define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
 				 PAD_CTL_PUS_100K_UP)
 #define SD_CLK_PAD_CTRL		(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
 #define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
 				 PAD_CTL_DSE_HIGH)

 int board_mmc_init(bd_t *bis)
 {
 	static const iomux_v3_cfg_t sd1_pads[] = {
 		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
 	};

 	static const iomux_v3_cfg_t sd2_pads[] = {
 		NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL),
 		NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL),
 	};

 	u32 index;
 	int ret;

 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);

 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 		switch (index) {
 		case 0:
 			imx_iomux_v3_setup_multiple_pads(sd1_pads,
 							 ARRAY_SIZE(sd1_pads));
 			break;
 		case 1:
 			imx_iomux_v3_setup_multiple_pads(sd2_pads,
 							 ARRAY_SIZE(sd2_pads));
 			break;
 		default:
 			printf("Warning: you configured more ESDHC controller"
 				"(%d) as supported by the board(2)\n",
 				CONFIG_SYS_FSL_ESDHC_NUM);
 			return -EINVAL;
 		}
 		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
 		if (ret)
 			return ret;
 	}

 	return 0;
 }
 #endif

 static void weim_smc911x_iomux(void)
 {
 	static const iomux_v3_cfg_t weim_smc911x_pads[] = {
 		/* Data bus */
 		NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),

 		/* Address lines */
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
 		NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
 				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),

 		/* other EIM signals for ethernet */
 		MX53_PAD_EIM_OE__EMI_WEIM_OE,
 		MX53_PAD_EIM_RW__EMI_WEIM_RW,
 		MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
 	};

 	/* ETHERNET_INT as GPIO2_31 */
 	imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31);
 	gpio_direction_input(ETHERNET_INT);

 	/* WEIM bus */
 	imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads,
 						ARRAY_SIZE(weim_smc911x_pads));
 }

 static void weim_cs1_settings(void)
 {
 	struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;

 	writel(MX53ARD_CS1GCR1, &weim_regs->cs1gcr1);
 	writel(0x0, &weim_regs->cs1gcr2);
 	writel(MX53ARD_CS1RCR1, &weim_regs->cs1rcr1);
 	writel(MX53ARD_CS1RCR2, &weim_regs->cs1rcr2);
 	writel(MX53ARD_CS1WCR1, &weim_regs->cs1wcr1);
 	writel(0x0, &weim_regs->cs1wcr2);
 	writel(0x0, &weim_regs->wcr);

 	set_chipselect_size(CS0_64M_CS1_64M);
 }

 int board_early_init_f(void)
 {
 	setup_iomux_nand();
 	setup_iomux_uart();
 	return 0;
 }

 int board_init(void)
 {
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

 	return 0;
 }

 int board_eth_init(bd_t *bis)
 {
 	int rc = -ENODEV;

 	weim_smc911x_iomux();
 	weim_cs1_settings();

 #ifdef CONFIG_SMC911X
 	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
 #endif
 	return rc;
 }

 int checkboard(void)
 {
 	puts("Board: MX53ARD\n");

 	return 0;
 }
	/*
	* (C) Copyright 2011 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/sys_proto.h>
	#include <asm/arch/crm_regs.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/iomux-mx53.h>
	#include <asm/errno.h>
	#include <netdev.h>
	#include <mmc.h>
	#include <fsl_esdhc.h>
	#include <asm/gpio.h>

	#define ETHERNET_INT IMX_GPIO_NR(2, 31)

	DECLARE_GLOBAL_DATA_PTR;

	int dram_init(void)
	{
	u32 size1, size2;

	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);

	gd->ram_size = size1 + size2;

	return 0;
	}
	void dram_init_banksize(void)
	{
	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
	}

	#ifdef CONFIG_NAND_MXC
	static void setup_iomux_nand(void)
	{
	static const iomux_v3_cfg_t nand_pads[] = {
	NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
	PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1,
	PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
	PAD_CTL_PUS_100K_UP),
	NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
	PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
	PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
	PAD_CTL_PUS_100K_UP),
	NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
	PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
	PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	};

	u32 i, reg;

	reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
	reg &= ~M4IF_GENP_WEIM_MM_MASK;
	__raw_writel(reg, M4IF_BASE_ADDR + 0xc);
	for (i = 0x4; i < 0x94; i += 0x18) {
	reg = __raw_readl(WEIM_BASE_ADDR + i);
	reg &= ~WEIM_GCR2_MUX16_BYP_GRANT_MASK;
	__raw_writel(reg, WEIM_BASE_ADDR + i);
	}

	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
	}
	#else
	static void setup_iomux_nand(void)
	{
	}
	#endif

	#define UART_PAD_CTRL (PAD_CTL_HYS \| PAD_CTL_DSE_HIGH \| \
	PAD_CTL_PUS_100K_UP \| PAD_CTL_ODE)

	static void setup_iomux_uart(void)
	{
	static const iomux_v3_cfg_t uart_pads[] = {
	NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL),
	};

	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
	}

	#ifdef CONFIG_FSL_ESDHC
	struct fsl_esdhc_cfg esdhc_cfg[2] = {
	{MMC_SDHC1_BASE_ADDR},
	{MMC_SDHC2_BASE_ADDR},
	};

	int board_mmc_getcd(struct mmc *mmc)
	{
	struct fsl_esdhc_cfg cfg = (struct fsl_esdhc_cfg )mmc->priv;
	int ret;

	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
	gpio_direction_input(IMX_GPIO_NR(1, 1));
	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4);
	gpio_direction_input(IMX_GPIO_NR(1, 4));

	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
	ret = !gpio_get_value(IMX_GPIO_NR(1, 1));
	else
	ret = !gpio_get_value(IMX_GPIO_NR(1, 4));

	return ret;
	}

	#define SD_CMD_PAD_CTRL (PAD_CTL_HYS \| PAD_CTL_DSE_HIGH \| \
	PAD_CTL_PUS_100K_UP)
	#define SD_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP \| PAD_CTL_DSE_HIGH)
	#define SD_PAD_CTRL (PAD_CTL_HYS \| PAD_CTL_PUS_47K_UP \| \
	PAD_CTL_DSE_HIGH)

	int board_mmc_init(bd_t *bis)
	{
	static const iomux_v3_cfg_t sd1_pads[] = {
	NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
	};

	static const iomux_v3_cfg_t sd2_pads[] = {
	NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL),
	NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL),
	};

	u32 index;
	int ret;

	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);

	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
	switch (index) {
	case 0:
	imx_iomux_v3_setup_multiple_pads(sd1_pads,
	ARRAY_SIZE(sd1_pads));
	break;
	case 1:
	imx_iomux_v3_setup_multiple_pads(sd2_pads,
	ARRAY_SIZE(sd2_pads));
	break;
	default:
	printf("Warning: you configured more ESDHC controller"
	"(%d) as supported by the board(2)\n",
	CONFIG_SYS_FSL_ESDHC_NUM);
	return -EINVAL;
	}
	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
	if (ret)
	return ret;
	}

	return 0;
	}
	#endif

	static void weim_smc911x_iomux(void)
	{
	static const iomux_v3_cfg_t weim_smc911x_pads[] = {
	/* Data bus */
	NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),

	/* Address lines */
	NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),
	NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
	PAD_CTL_PKE \| PAD_CTL_DSE_HIGH),

	/* other EIM signals for ethernet */
	MX53_PAD_EIM_OE__EMI_WEIM_OE,
	MX53_PAD_EIM_RW__EMI_WEIM_RW,
	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
	};

	/* ETHERNET_INT as GPIO2_31 */
	imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31);
	gpio_direction_input(ETHERNET_INT);

	/* WEIM bus */
	imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads,
	ARRAY_SIZE(weim_smc911x_pads));
	}

	static void weim_cs1_settings(void)
	{
	struct weim weim_regs = (struct weim )WEIM_BASE_ADDR;

	writel(MX53ARD_CS1GCR1, &weim_regs->cs1gcr1);
	writel(0x0, &weim_regs->cs1gcr2);
	writel(MX53ARD_CS1RCR1, &weim_regs->cs1rcr1);
	writel(MX53ARD_CS1RCR2, &weim_regs->cs1rcr2);
	writel(MX53ARD_CS1WCR1, &weim_regs->cs1wcr1);
	writel(0x0, &weim_regs->cs1wcr2);
	writel(0x0, &weim_regs->wcr);

	set_chipselect_size(CS0_64M_CS1_64M);
	}

	int board_early_init_f(void)
	{
	setup_iomux_nand();
	setup_iomux_uart();
	return 0;
	}

	int board_init(void)
	{
	/* address of boot parameters */
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	return 0;
	}

	int board_eth_init(bd_t *bis)
	{
	int rc = -ENODEV;

	weim_smc911x_iomux();
	weim_cs1_settings();

	#ifdef CONFIG_SMC911X
	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
	#endif
	return rc;
	}

	int checkboard(void)
	{
	puts("Board: MX53ARD\n");

	return 0;
	}