| /* |
| * (C) Copyright 2009 |
| * Stefano Babic DENX Software Engineering sbabic@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * |
| * Refer doc/README.imximage for more details about how-to configure |
| * and create imximage boot image |
| * |
| * The syntax is taken as close as possible with the kwbimage |
| */ |
| |
| /* |
| * Boot Device : one of |
| * spi, sd (the board has no nand neither onenand) |
| */ |
| BOOT_FROM sd |
| |
| /* |
| * Device Configuration Data (DCD) |
| * |
| * Each entry must have the format: |
| * Addr-type Address Value |
| * |
| * where: |
| * Addr-type register length (1,2 or 4 bytes) |
| * Address absolute address of the register |
| * value value to be stored in the register |
| */ |
| /* EIM config-CS5 init -- CPLD */ |
| DATA 4 0xB8002050 0x0000D843 |
| DATA 4 0xB8002054 0x22252521 |
| DATA 4 0xB8002058 0x22220A00 |
| |
| /* DDR2 init */ |
| DATA 4 0xB8001004 0x0076E83A |
| DATA 4 0xB8001010 0x00000204 |
| DATA 4 0xB8001000 0x92210000 |
| DATA 4 0x80000f00 0x12344321 |
| DATA 4 0xB8001000 0xB2210000 |
| DATA 1 0x82000000 0xda |
| DATA 1 0x83000000 0xda |
| DATA 1 0x81000400 0xda |
| DATA 1 0x80000333 0xda |
| |
| DATA 4 0xB8001000 0x92210000 |
| DATA 1 0x80000400 0x12345678 |
| |
| DATA 4 0xB8001000 0xA2210000 |
| DATA 4 0x80000000 0x87654321 |
| DATA 4 0x80000000 0x87654321 |
| |
| DATA 4 0xB8001000 0xB2210000 |
| DATA 1 0x80000233 0xda |
| DATA 1 0x81000780 0xda |
| DATA 1 0x81000400 0xda |
| DATA 4 0xB8001000 0x82216080 |
| DATA 4 0x43FAC454 0x00001000 |
| |
| DATA 4 0x53F80008 0x20034000 |
| |
| /* Enable the clocks */ |
| DATA 4 0x53f8000c 0x1fffffff |
| DATA 4 0x53f80010 0xffffffff |
| DATA 4 0x53f80014 0xfdfff |