board/freescale/ls2080aqds/README - github/trini/u-boot - Gitiles

 Overview
 --------
 The LS2080A Development System (QDS) is a high-performance computing,
 evaluation, and development platform that supports the QorIQ LS2080A
 Layerscape Architecture processor. The LS2080AQDS provides validation and
 SW development platform for the Freescale LS2080A processor series, with
 a complete debugging environment.

 LS2080A SoC Overview
 ------------------
 The LS2080A integrated multicore processor combines eight ARM Cortex-A57
 processor cores with high-performance data path acceleration logic and network
 and peripheral bus interfaces required for networking, telecom/datacom,
 wireless infrastructure, and mil/aerospace applications.

 The LS2080A SoC includes the following function and features:

  - Eight 64-bit ARM Cortex-A57 CPUs
  - 1 MB platform cache with ECC
  - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
  - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
   the AIOP
  - Data path acceleration architecture (DPAA2) incorporating acceleration for
  the following functions:
    - Packet parsing, classification, and distribution (WRIOP)
    - Queue and Hardware buffer management for scheduling, packet sequencing, and
      congestion management, buffer allocation and de-allocation (QBMan)
    - Cryptography acceleration (SEC) at up to 10 Gbps
    - RegEx pattern matching acceleration (PME) at up to 10 Gbps
    - Decompression/compression acceleration (DCE) at up to 20 Gbps
    - Accelerated I/O processing (AIOP) at up to 20 Gbps
    - QDMA engine
  - 16 SerDes lanes at up to 10.3125 GHz
  - Ethernet interfaces
    - Up to eight 10 Gbps Ethernet MACs
    - Up to eight 1 / 2.5 Gbps Ethernet MACs
  - High-speed peripheral interfaces
    - Four PCIe 3.0 controllers, one supporting SR-IOV
  - Additional peripheral interfaces
    - Two serial ATA (SATA 3.0) controllers
    - Two high-speed USB 3.0 controllers with integrated PHY
    - Enhanced secure digital host controller (eSDXC/eMMC)
    - Serial peripheral interface (SPI) controller
    - Quad Serial Peripheral Interface (QSPI) Controller
    - Four I2C controllers
    - Two DUARTs
    - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
  - Support for hardware virtualization and partitioning enforcement
  - QorIQ platform's trust architecture 3.0
  - Service processor (SP) provides pre-boot initialization and secure-boot
   capabilities

  LS2080AQDS board Overview
  -----------------------
  - SERDES Connections, 16 lanes supporting:
       - PCI Express - 3.0
       - SGMII, SGMII 2.5
       - QSGMII
       - SATA 3.0
       - XAUI
       - XFI
  - DDR Controller
      - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
        chip-selects and two DIMM connectors. Support is up to 2133MT/s.
      - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
        and two DIMM connectors. Support is up to 1600MT/s.
  -IFC/Local Bus
     - IFC rev. 2.0 implementation supporting Little Endian connection scheme.
     - One in-socket 128 MB NOR flash 16-bit data bus
     - One 512 MB NAND flash with ECC support
     - IFC Test Port
     - PromJet Port
     - FPGA connection
  - USB 3.0
     - Two high speed USB 3.0 ports
     - First USB 3.0 port configured as Host with Type-A connector
     - Second USB 3.0 port configured as OTG with micro-AB connector
  - SDHC: PCIe x1 Right Angle connector for supporting following cards
     - 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only
     - 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only
     - 4-bit eMMC Card Rev 4.4 (1.8V only)
     - 8-bit eMMC Card Rev 4.5 (1.8V only)
     - SD Card Rev 2.0 and Rev 3.0
  - DSPI: 3 high-speed flash Memory for storage
     - 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
     - 8 MB high-speed flash Memory (up to 104 MHz)
     - 512 MB low-speed flash Memory (up to 40 MHz)
  - QSPI: via NAND/QSPI Card
  - 4 I2C controllers
  - Two SATA onboard connectors
  - UART
    - Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to 115.2 Kbit/s
    - Two DB9 D-Type connectors supporting one Serial port each
  - ARM JTAG support

 Memory map from core's view
 ----------------------------
 0x00_0000_0000 .. 0x00_000F_FFFF	Boot Rom
 0x00_0100_0000 .. 0x00_0FFF_FFFF	CCSR
 0x00_1800_0000 .. 0x00_181F_FFFF	OCRAM
 0x00_3000_0000 .. 0x00_3FFF_FFFF	IFC region #1
 0x00_8000_0000 .. 0x00_FFFF_FFFF	DDR region #1
 0x05_1000_0000 .. 0x05_FFFF_FFFF	IFC region #2
 0x80_8000_0000 .. 0xFF_FFFF_FFFF	DDR region #2

 Other addresses are either reserved, or not used directly by u-boot.
 This list should be updated when more addresses are used.

 IFC region map from core's view
 -------------------------------
 During boot i.e. IFC Region #1:-
   0x30000000 - 0x37ffffff : 128MB : NOR flash
   0x38000000 - 0x3BFFFFFF : 64MB  : Promjet
   0x3C000000 - 0x40000000 : 64MB  : FPGA etc

 After relocate to DDR i.e. IFC Region #2:-
   0x5_1000_0000..0x5_1fff_ffff	Memory Hole
   0x5_2000_0000..0x5_3fff_ffff	IFC CSx (FPGA, NAND and others 512MB)
   0x5_4000_0000..0x5_7fff_ffff	ASIC or others 1GB
   0x5_8000_0000..0x5_bfff_ffff	IFC CS0 1GB (NOR/Promjet)
   0x5_C000_0000..0x5_ffff_ffff	IFC CS1 1GB (NOR/Promjet)

 Booting Options
 ---------------
 a) Promjet Boot
 b) NOR boot
 c) NAND boot
 d) SD boot
 e) QSPI boot

 Environment Variables
 ---------------------
 - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
   the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.

 - mcmemsize: MC DRAM block size. If this variable is not defined
   the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.

 Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
 -------------------------------------------------------------------
 One needs to use appropriate bootargs to boot Linux flavors which do
 not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
 below:

 => setenv bootargs 'console=ttyS1,115200 root=/dev/ram
    earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
    hugepages=16 mem=2048M'


 X-QSGMII-16PORT riser card
 ----------------------------
 The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes
 interfaces implemented in PCIe form factor board.
 It supports followings
  - Card can operate with up to 4 QSGMII lane simultaneously
  - Card can operate with up to 8 SGMII lane simultaneously

 Supported card configuration
 	- CSEL  : ON ON ON ON
 	- MSEL1 : ON ON ON ON OFF OFF OFF OFF
 	- MSEL2 : OFF OFF OFF OFF ON ON ON ON

 To enable this card: modify hwconfig to add "xqsgmii" variable.

 Supported PHY addresses during SGMII:
 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe

 Mapping DPMACx to PHY during SGMII
 DPMAC1 -> PHY1-P0
 DPMAC2 -> PHY2-P0
 DPMAC3 -> PHY3-P0
 DPMAC4 -> PHY4-P0
 DPMAC5 -> PHY3-P2
 DPMAC6 -> PHY1-P2
 DPMAC7 -> PHY4-P1
 DPMAC8 -> PHY2-P2
 DPMAC9 -> PHY1-P0
 DPMAC10 -> PHY2-P0
 DPMAC11 -> PHY3-P0
 DPMAC12 -> PHY4-P0
 DPMAC13 -> PHY3-P2
 DPMAC14 -> PHY1-P2
 DPMAC15 -> PHY4-P1
 DPMAC16 -> PHY2-P2


 Supported PHY address during QSGMII
 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf

 Mapping DPMACx to PHY during QSGMII
 DPMAC1 -> PHY1-P3
 DPMAC2 -> PHY1-P2
 DPMAC3 -> PHY1-P1
 DPMAC4 -> PHY1-P0
 DPMAC5 -> PHY2-P3
 DPMAC6 -> PHY2-P2
 DPMAC7 -> PHY2-P1
 DPMAC8 -> PHY2-P0
 DPMAC9 -> PHY3-P0
 DPMAC10 -> PHY3-P1
 DPMAC11 -> PHY3-P2
 DPMAC12 -> PHY3-P3
 DPMAC13 -> PHY4-P0
 DPMAC14 -> PHY4-P1
 DPMAC15 -> PHY4-P2
 DPMAC16 -> PHY4-P3
	Overview
	--------
	The LS2080A Development System (QDS) is a high-performance computing,
	evaluation, and development platform that supports the QorIQ LS2080A
	Layerscape Architecture processor. The LS2080AQDS provides validation and
	SW development platform for the Freescale LS2080A processor series, with
	a complete debugging environment.

	LS2080A SoC Overview
	------------------
	The LS2080A integrated multicore processor combines eight ARM Cortex-A57
	processor cores with high-performance data path acceleration logic and network
	and peripheral bus interfaces required for networking, telecom/datacom,
	wireless infrastructure, and mil/aerospace applications.

	The LS2080A SoC includes the following function and features:

	- Eight 64-bit ARM Cortex-A57 CPUs
	- 1 MB platform cache with ECC
	- Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
	- One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
	the AIOP
	- Data path acceleration architecture (DPAA2) incorporating acceleration for
	the following functions:
	- Packet parsing, classification, and distribution (WRIOP)
	- Queue and Hardware buffer management for scheduling, packet sequencing, and
	congestion management, buffer allocation and de-allocation (QBMan)
	- Cryptography acceleration (SEC) at up to 10 Gbps
	- RegEx pattern matching acceleration (PME) at up to 10 Gbps
	- Decompression/compression acceleration (DCE) at up to 20 Gbps
	- Accelerated I/O processing (AIOP) at up to 20 Gbps
	- QDMA engine
	- 16 SerDes lanes at up to 10.3125 GHz
	- Ethernet interfaces
	- Up to eight 10 Gbps Ethernet MACs
	- Up to eight 1 / 2.5 Gbps Ethernet MACs
	- High-speed peripheral interfaces
	- Four PCIe 3.0 controllers, one supporting SR-IOV
	- Additional peripheral interfaces
	- Two serial ATA (SATA 3.0) controllers
	- Two high-speed USB 3.0 controllers with integrated PHY
	- Enhanced secure digital host controller (eSDXC/eMMC)
	- Serial peripheral interface (SPI) controller
	- Quad Serial Peripheral Interface (QSPI) Controller
	- Four I2C controllers
	- Two DUARTs
	- Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
	- Support for hardware virtualization and partitioning enforcement
	- QorIQ platform's trust architecture 3.0
	- Service processor (SP) provides pre-boot initialization and secure-boot
	capabilities

	LS2080AQDS board Overview
	-----------------------
	- SERDES Connections, 16 lanes supporting:
	- PCI Express - 3.0
	- SGMII, SGMII 2.5
	- QSGMII
	- SATA 3.0
	- XAUI
	- XFI
	- DDR Controller
	- Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
	chip-selects and two DIMM connectors. Support is up to 2133MT/s.
	- One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
	and two DIMM connectors. Support is up to 1600MT/s.
	-IFC/Local Bus
	- IFC rev. 2.0 implementation supporting Little Endian connection scheme.
	- One in-socket 128 MB NOR flash 16-bit data bus
	- One 512 MB NAND flash with ECC support
	- IFC Test Port
	- PromJet Port
	- FPGA connection
	- USB 3.0
	- Two high speed USB 3.0 ports
	- First USB 3.0 port configured as Host with Type-A connector
	- Second USB 3.0 port configured as OTG with micro-AB connector
	- SDHC: PCIe x1 Right Angle connector for supporting following cards
	- 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only
	- 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only
	- 4-bit eMMC Card Rev 4.4 (1.8V only)
	- 8-bit eMMC Card Rev 4.5 (1.8V only)
	- SD Card Rev 2.0 and Rev 3.0
	- DSPI: 3 high-speed flash Memory for storage
	- 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
	- 8 MB high-speed flash Memory (up to 104 MHz)
	- 512 MB low-speed flash Memory (up to 40 MHz)
	- QSPI: via NAND/QSPI Card
	- 4 I2C controllers
	- Two SATA onboard connectors
	- UART
	- Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to 115.2 Kbit/s
	- Two DB9 D-Type connectors supporting one Serial port each
	- ARM JTAG support

	Memory map from core's view
	----------------------------
	0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
	0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
	0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
	0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
	0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
	0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
	0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2

	Other addresses are either reserved, or not used directly by u-boot.
	This list should be updated when more addresses are used.

	IFC region map from core's view
	-------------------------------
	During boot i.e. IFC Region #1:-
	0x30000000 - 0x37ffffff : 128MB : NOR flash
	0x38000000 - 0x3BFFFFFF : 64MB : Promjet
	0x3C000000 - 0x40000000 : 64MB : FPGA etc

	After relocate to DDR i.e. IFC Region #2:-
	0x5_1000_0000..0x5_1fff_ffff Memory Hole
	0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
	0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
	0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
	0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)

	Booting Options
	---------------
	a) Promjet Boot
	b) NOR boot
	c) NAND boot
	d) SD boot
	e) QSPI boot

	Environment Variables
	---------------------
	- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
	the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.

	- mcmemsize: MC DRAM block size. If this variable is not defined
	the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.

	Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
	-------------------------------------------------------------------
	One needs to use appropriate bootargs to boot Linux flavors which do
	not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
	below:

	=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
	earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
	hugepages=16 mem=2048M'


	X-QSGMII-16PORT riser card
	----------------------------
	The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes
	interfaces implemented in PCIe form factor board.
	It supports followings
	- Card can operate with up to 4 QSGMII lane simultaneously
	- Card can operate with up to 8 SGMII lane simultaneously

	Supported card configuration
	- CSEL : ON ON ON ON
	- MSEL1 : ON ON ON ON OFF OFF OFF OFF
	- MSEL2 : OFF OFF OFF OFF ON ON ON ON

	To enable this card: modify hwconfig to add "xqsgmii" variable.

	Supported PHY addresses during SGMII:
	#define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
	#define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
	#define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
	#define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
	#define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
	#define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
	#define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
	#define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe

	Mapping DPMACx to PHY during SGMII
	DPMAC1 -> PHY1-P0
	DPMAC2 -> PHY2-P0
	DPMAC3 -> PHY3-P0
	DPMAC4 -> PHY4-P0
	DPMAC5 -> PHY3-P2
	DPMAC6 -> PHY1-P2
	DPMAC7 -> PHY4-P1
	DPMAC8 -> PHY2-P2
	DPMAC9 -> PHY1-P0
	DPMAC10 -> PHY2-P0
	DPMAC11 -> PHY3-P0
	DPMAC12 -> PHY4-P0
	DPMAC13 -> PHY3-P2
	DPMAC14 -> PHY1-P2
	DPMAC15 -> PHY4-P1
	DPMAC16 -> PHY2-P2


	Supported PHY address during QSGMII
	#define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
	#define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
	#define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
	#define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
	#define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
	#define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
	#define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
	#define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
	#define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
	#define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
	#define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
	#define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
	#define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
	#define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
	#define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
	#define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf

	Mapping DPMACx to PHY during QSGMII
	DPMAC1 -> PHY1-P3
	DPMAC2 -> PHY1-P2
	DPMAC3 -> PHY1-P1
	DPMAC4 -> PHY1-P0
	DPMAC5 -> PHY2-P3
	DPMAC6 -> PHY2-P2
	DPMAC7 -> PHY2-P1
	DPMAC8 -> PHY2-P0
	DPMAC9 -> PHY3-P0
	DPMAC10 -> PHY3-P1
	DPMAC11 -> PHY3-P2
	DPMAC12 -> PHY3-P3
	DPMAC13 -> PHY4-P0
	DPMAC14 -> PHY4-P1
	DPMAC15 -> PHY4-P2
	DPMAC16 -> PHY4-P3