blob: c806a6b3cb2ce0e53500223df34e252b1aed0187 [file] [log] [blame]
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/uart.h>
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
const struct tegra2_sysinfo sysinfo = {
CONFIG_TEGRA2_BOARD_STRING
};
/*
* Routine: timer_init
* Description: init the timestamp and lastinc value
*/
int timer_init(void)
{
return 0;
}
static void enable_uart(enum periph_id pid)
{
/* Assert UART reset and enable clock */
reset_set_enable(pid, 1);
clock_enable(pid);
clock_ll_set_source(pid, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
/* wait for 2us */
udelay(2);
/* De-assert reset to UART */
reset_set_enable(pid, 0);
}
/*
* Routine: clock_init_uart
* Description: init the PLL and clock for the UART(s)
*/
static void clock_init_uart(void)
{
#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
enable_uart(PERIPH_ID_UART1);
#endif /* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
enable_uart(PERIPH_ID_UART4);
#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
}
/*
* Routine: pin_mux_uart
* Description: setup the pin muxes/tristate values for the UART(s)
*/
static void pin_mux_uart(void)
{
#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
pinmux_tristate_disable(PINGRP_IRRX);
pinmux_tristate_disable(PINGRP_IRTX);
#endif /* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
pinmux_tristate_disable(PINGRP_GMC);
#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
}
/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
clock_init();
clock_verify();
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
/* We didn't do this init in start.S, so do it now */
cpu_init_cp15();
/* Initialize essential common plls */
clock_early_init();
/* Initialize UART clocks */
clock_init_uart();
/* Initialize periph pinmuxes */
pin_mux_uart();
/* Initialize periph GPIOs */
gpio_config_uart();
return 0;
}
#endif /* EARLY_INIT */