include/configs/galaxy5200.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2006
  * Eric Schumann, Phytec Messatechnik GmbH
  *
  * (C) Copyright 2009
  * Jon Smirl <jonsmirl@gmail.com>
  *
  * (C) Copyright 2009
  * Eric Millbrandt, DEKA Research and Development Corporation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #define CONFIG_BOARDINFO	 "galaxy5200"

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333	/* ... running at 33.333333MHz */
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot */

 /*
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	4	/* console is on PSC4 -> */
 					/* define gps port conf. */
 					/* register later on to  */
 					/* enable UART function! */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_FAT

 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */

 #if (TEXT_BASE == 0xFE000000)		/* Boot low */
 #define CONFIG_SYS_LOWBOOT 1
 #endif
 /* RAMBOOT will be defined automatically in memory section */

 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
 #define MTDPARTS_DEFAULT	"mtdparts=physmap-flash.0:256k(ubootl)," \
 	"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"

 /*
  * Autobooting
  */
 #define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow stopping of boot process */
 					/* even with bootdelay=0 */
 #define CONFIG_BOOT_RETRY_TIME 120	/* Reset if no command is entered  */
 #define CONFIG_RESET_TO_RETRY

 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Welcome to U-Boot;"\
 	"echo"

 #define CONFIG_BOOTCOMMAND     "go ff300004 0; go ff300004 2 2;" \
 	"bootm ff040000 ff900000 fffc0000"
 #define CONFIG_BOOTARGS        "console=ttyPSC0,115200"
 #define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"

 /*
  * IPB Bus clocking configuration.
  */
 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK	/* define for 133MHz speed */
 #define CONFIG_SYS_XLB_PIPELINING	1

 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C 1		/* I2C with hardware support */
 #define CONFIG_SYS_I2C_MODULE 2		/* Select I2C module #1 or #2 */
 #define CONFIG_SYS_I2C_SPEED 100000	/* 100 kHz */
 #define CONFIG_SYS_I2C_SLAVE 0x7F
 #define CONFIG_SYS_I2C_INIT_MPC5XXX	/* Reset devices on i2c bus */

 /*
  * EEPROM CAT24WC32 configuration
  */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* 1010100x */
 #define CONFIG_SYS_I2C_FACT_ADDR	0x52	/* EEPROM CAT24WC32 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address */
 #define CONFIG_SYS_EEPROM_SIZE		4096
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15

 /*
  * RTC configuration
  */
 #define RTC
 #define CONFIG_RTC_DS3231		1
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68

 /*
  * Flash configuration
  */

 #define CONFIG_SYS_FLASH_BASE		0xfe000000
 /*
  * The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
  * variable defined
  */
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }

 #define CONFIG_SYS_FLASH_CFI 1		/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_MAX_FLASH_SECT 259	/* max num of sects on one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max num of flash banks */
 					/* (= chip selects) */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

 /*
  * Use hardware protection. This seems required, as the BDI uses hardware
  * protection. Without this, U-Boot can't work with this sectors as its
  * protection is software only by default.
  */
 #define CONFIG_SYS_FLASH_PROTECTION	1

 /*
  * Environment settings
  */

 #define CONFIG_ENV_IS_IN_EEPROM	1
 #define CONFIG_ENV_OFFSET	0x00	/* environment starts at the */
 					/* beginning of the EEPROM */
 #define CONFIG_ENV_SIZE		CONFIG_SYS_EEPROM_SIZE

 #define CONFIG_ENV_OVERWRITE	1

 /*
  * SDRAM configuration
  */
 #define SDRAM_DDR	1
 #define SDRAM_MODE	0x018D0000
 #define SDRAM_EMODE	0x40090000
 #define SDRAM_CONTROL	0x71500F00
 #define SDRAM_CONFIG1	0x73711930
 #define SDRAM_CONFIG2	0x47770000

 /*
  * Memory map
  */
 #define CONFIG_SYS_MBAR	0xF0000000	/* MBAR has to be switched by other */
 					/* bootloader or debugger config */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_DEFAULT_MBAR		0x80000000

 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM

 /* End of used area in SPRAM */
 #define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE

 /* Size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_SIZE	128

 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
 						CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #	define CONFIG_SYS_RAMBOOT		1
 #endif

 #define CONFIG_SYS_MONITOR_LEN (192 << 10)	/* Reserve 192 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN (128 << 10)	/* Reserve 128 kB for malloc() */
 #define CONFIG_SYS_BOOTMAPSZ (8 << 20)	/* Initial Memory map for Linux */

 /* Chip Select configuration for NAND flash */
 #define CONFIG_SYS_CS1_START		0x20000000
 #define CONFIG_SYS_CS1_SIZE		0x90000
 #define CONFIG_SYS_CS1_CFG		0x00025b00

 /* Chip Select configuration for Epson S1D13513 */
 #define CONFIG_SYS_CS3_START		0x10000000
 #define CONFIG_SYS_CS3_SIZE		0x400000
 #define CONFIG_SYS_CS3_CFG		0xffff3d10

 /*
  * Ethernet configuration
  */
 #define CONFIG_MPC5xxx_FEC		1
 #define CONFIG_MPC5xxx_FEC_MII100
 #define CONFIG_PHY_ADDR			0x01
 #define CONFIG_NO_AUTOLOAD		1

 /*
  * GPIO configuration
  *
  * GPS port configuration
  *
  * [29:31] = 01x
  * AC97 on PSC1
  * PSC1_0 -> AC97 SDATA out
  * PSC1_1 -> AC97 SDTA in
  * PSC1_2 -> AC97 SYNC out
  * PSC1_3 -> AC97 bitclock out
  * PSC1_4 -> AC97 reset out
  *
  * [28] = Reserved
  *
  * [25:27] = 110
  * SPI on PSC2
  * PSC2_0 -> MOSI
  * PSC2_1 -> MISO
  * PSC2_2 -> n/a
  * PSC2_3 -> CLK
  * PSC2_4 -> SS
  *
  * [24] = Reserved
  *
  * [20:23] = 0001
  * USB on PSC3
  * PSC3_0 -> USB_OE OE out
  * PSC3_1 -> USB_TXN Tx- out
  * PSC3_2 -> USB_TXP Tx+ out
  * PSC3_3 -> USB_TXD
  * PSC3_4 -> USB_RXP Rx+ in
  * PSC3_5 -> USB_RXN Rx- in
  * PSC3_6 -> USB_PWR PortPower out
  * PSC3_7 -> USB_SPEED speed out
  * PSC3_8 -> USB_SUSPEND suspend
  * PSC3_9 -> USB_OVRCURNT overcurrent in
  *
  * [18:19] = 10
  * Two UARTs
  *
  * [17] = 0
  * USB differential mode
  *
  * [16] = 1
  * PCI disabled
  *
  * [12:15] = 0101
  * Ethernet 100Mbit with MD
  * ETH_0 -> ETH Txen
  * ETH_1 -> ETH TxD0
  * ETH_2 -> ETH TxD1
  * ETH_3 -> ETH TxD2
  * ETH_4 -> ETH TxD3
  * ETH_5 -> ETH Txerr
  * ETH_6 -> ETH MDC
  * ETH_7 -> ETH MDIO
  * ETH_8 -> ETH RxDv
  * ETH_9 -> ETH RxCLK
  * ETH_10 -> ETH Collision
  * ETH_11 -> ETH TxD
  * ETH_12 -> ETH RxD0
  * ETH_13 -> ETH RxD1
  * ETH_14 -> ETH RxD2
  * ETH_15 -> ETH RxD3
  * ETH_16 -> ETH Rxerr
  * ETH_17 -> ETH CRS
  *
  * [9:11] = 111
  * SPI on PSC6
  * PSC6_0 -> MISO
  * PSC6_1 -> SS#
  * PSC6_2 -> MOSI
  * PSC6_3 -> CLK
  *
  * [8] = 0
  * IrDA/USB 48MHz clock generated internally
  *
  * [6:7] = 01
  * ATA chip selects on csb_4/5
  * CSB_4 -> ATA_CS0 out
  * CSB_5 -> ATA_CS1 out
  *
  * [5] = 1
  * PSC3_4 is used as CS6
  *
  * [4] = 1
  * PSC3_5 is used as CS7
  *
  * [2:3] = 00
  * No Alternatives
  *
  * [1] = 0
  * gpio_wkup_7 is GPIO
  *
  * [0] = 0
  * gpio_wkup_6 is GPIO
  *
  */
 #define CONFIG_SYS_GPS_PORT_CONFIG	0x0d75a162

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_PROMPT "uboot> "		/* Monitor Command Prompt */

 #define CONFIG_CMDLINE_EDITING 1		/* add command line history */

 #define CONFIG_SYS_CACHELINE_SIZE 32		/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CACHELINE_SHIFT 5		/* log base 2 of the above value */
 #endif

 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE 1024			/* Console I/O Buffer Size */
 #else
 #define CONFIG_SYS_CBSIZE 512			/* Console I/O Buffer Size */
 #endif
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 						/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS 32			/* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */

 #define CONFIG_SYS_MEMTEST_START 0x00100000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END 0x00f00000	/* 1 ... 15 MB in DRAM */

 #define CONFIG_SYS_LOAD_ADDR 0x400000		/* default load address */
 #define CONFIG_SYS_HZ 1000			/* decrementer freq: 1 ms ticks */

 #define CONFIG_DISPLAY_BOARDINFO 1

 #define CONFIG_SYS_HUSH_PARSER 1
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

 #define CONFIG_CRC32_VERIFY  1

 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_DNS | \
 				 CONFIG_BOOTP_DNS2 | \
 				 CONFIG_BOOTP_SEND_HOSTNAME )

 #define CONFIG_VERSION_VARIABLE 1

 /*
  * Various low-level settings
  */
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE

 /* no burst access on the LPB */
 #define CONFIG_SYS_CS_BURST		0x00000000
 /* one deadcycle for the 33MHz statemachine */
 #define CONFIG_SYS_CS_DEADCYCLE		0x33333331

 #define CONFIG_SYS_BOOTCS_CFG		0x0002d900
 #define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE

 #define CONFIG_SYS_RESET_ADDRESS	0xff000000

 /*
  * USB settings
  */
 #define CONFIG_USB_CLOCK		0x0001bbbb
 /* USB is on PSC3 */
 #define CONFIG_PSC3_USB
 #define CONFIG_USB_CONFIG		0x00000100
 #define CONFIG_USB_OHCI
 #define CONFIG_USB_STORAGE

 /*
  * IDE/ATA stuff Supports IDE harddisk
  */
 #undef  CONFIG_IDE_8xx_PCCARD	/* Use IDE with PC Card Adapter */
 #undef	CONFIG_IDE_8xx_DIRECT	/* Direct IDE not supported */
 #undef	CONFIG_IDE_LED		/* LED for ide not supported */

 #define	CONFIG_IDE_RESET 1	/* reset for ide supported */
 #define CONFIG_IDE_PREINIT
 #define CONFIG_SYS_IDE_MAXBUS 1	/* max. 1 IDE bus */
 #define CONFIG_SYS_IDE_MAXDEVICE 2	/* max. 2 drives per IDE bus */
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 #define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 /* Offset for data I/O			*/
 #define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 /* Offset for normal register accesses	*/
 #define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 /* Offset for alternate registers	*/
 #define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 /* Interval between registers */
 #define CONFIG_SYS_ATA_STRIDE		4
 #define CONFIG_ATAPI			1

 /* we enable IDE and FAT support, so we also need partition support */
 #define CONFIG_DOS_PARTITION 1

 /*
  * Open Firmware flat tree
  */
 #define CONFIG_OF_LIBFDT		1
 #define CONFIG_OF_BOARD_SETUP		1

 #define OF_CPU				"PowerPC,5200@0"
 #define OF_TBCLK			CONFIG_SYS_MPC5XXX_CLKIN
 #define OF_SOC				"soc5200@f0000000"
 #define OF_STDOUT_PATH			"/soc5200@f0000000/serial@2600"

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2003-2005
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* (C) Copyright 2006
	* Eric Schumann, Phytec Messatechnik GmbH
	*
	* (C) Copyright 2009
	* Jon Smirl <jonsmirl@gmail.com>
	*
	* (C) Copyright 2009
	* Eric Millbrandt, DEKA Research and Development Corporation
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#define CONFIG_BOARDINFO "galaxy5200"

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
	#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	/*
	* Serial console configuration
	*/
	#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 -> */
	/* define gps port conf. */
	/* register later on to */
	/* enable UART function! */
	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_EEPROM
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_JFFS2
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NFS
	#define CONFIG_CMD_SNTP
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_USB
	#define CONFIG_CMD_CACHE
	#define CONFIG_CMD_FAT

	#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */

	#if (TEXT_BASE == 0xFE000000) /* Boot low */
	#define CONFIG_SYS_LOWBOOT 1
	#endif
	/* RAMBOOT will be defined automatically in memory section */

	#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
	#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \
	"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"

	/*
	* Autobooting
	*/
	#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
	#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */
	/* even with bootdelay=0 */
	#define CONFIG_BOOT_RETRY_TIME 120 /* Reset if no command is entered */
	#define CONFIG_RESET_TO_RETRY

	#define CONFIG_PREBOOT "echo;" \
	"echo Welcome to U-Boot;"\
	"echo"

	#define CONFIG_BOOTCOMMAND "go ff300004 0; go ff300004 2 2;" \
	"bootm ff040000 ff900000 fffc0000"
	#define CONFIG_BOOTARGS "console=ttyPSC0,115200"
	#define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"

	/*
	* IPB Bus clocking configuration.
	*/
	#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
	#define CONFIG_SYS_XLB_PIPELINING 1

	/*
	* I2C configuration
	*/
	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
	#define CONFIG_SYS_I2C_SLAVE 0x7F
	#define CONFIG_SYS_I2C_INIT_MPC5XXX /* Reset devices on i2c bus */

	/*
	* EEPROM CAT24WC32 configuration
	*/
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */
	#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
	#define CONFIG_SYS_EEPROM_SIZE 4096
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15

	/*
	* RTC configuration
	*/
	#define RTC
	#define CONFIG_RTC_DS3231 1
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68

	/*
	* Flash configuration
	*/

	#define CONFIG_SYS_FLASH_BASE 0xfe000000
	/*
	* The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
	* variable defined
	*/
	#define CONFIG_SYS_FLASH_SIZE 0x02000000
	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }

	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
	#define CONFIG_SYS_FLASH_EMPTY_INFO
	#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max num of sects on one chip */
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
	/* (= chip selects) */
	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

	/*
	* Use hardware protection. This seems required, as the BDI uses hardware
	* protection. Without this, U-Boot can't work with this sectors as its
	* protection is software only by default.
	*/
	#define CONFIG_SYS_FLASH_PROTECTION 1

	/*
	* Environment settings
	*/

	#define CONFIG_ENV_IS_IN_EEPROM 1
	#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */
	/* beginning of the EEPROM */
	#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE

	#define CONFIG_ENV_OVERWRITE 1

	/*
	* SDRAM configuration
	*/
	#define SDRAM_DDR 1
	#define SDRAM_MODE 0x018D0000
	#define SDRAM_EMODE 0x40090000
	#define SDRAM_CONTROL 0x71500F00
	#define SDRAM_CONFIG1 0x73711930
	#define SDRAM_CONFIG2 0x47770000

	/*
	* Memory map
	*/
	#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */
	/* bootloader or debugger config */
	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000

	/* Use SRAM until RAM will be available */
	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM

	/* End of used area in SPRAM */
	#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE

	/* Size in bytes reserved for initial data */
	#define CONFIG_SYS_GBL_DATA_SIZE 128

	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
	CONFIG_SYS_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	# define CONFIG_SYS_RAMBOOT 1
	#endif

	#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/* Chip Select configuration for NAND flash */
	#define CONFIG_SYS_CS1_START 0x20000000
	#define CONFIG_SYS_CS1_SIZE 0x90000
	#define CONFIG_SYS_CS1_CFG 0x00025b00

	/* Chip Select configuration for Epson S1D13513 */
	#define CONFIG_SYS_CS3_START 0x10000000
	#define CONFIG_SYS_CS3_SIZE 0x400000
	#define CONFIG_SYS_CS3_CFG 0xffff3d10

	/*
	* Ethernet configuration
	*/
	#define CONFIG_MPC5xxx_FEC 1
	#define CONFIG_MPC5xxx_FEC_MII100
	#define CONFIG_PHY_ADDR 0x01
	#define CONFIG_NO_AUTOLOAD 1

	/*
	* GPIO configuration
	*
	* GPS port configuration
	*
	* [29:31] = 01x
	* AC97 on PSC1
	* PSC1_0 -> AC97 SDATA out
	* PSC1_1 -> AC97 SDTA in
	* PSC1_2 -> AC97 SYNC out
	* PSC1_3 -> AC97 bitclock out
	* PSC1_4 -> AC97 reset out
	*
	* [28] = Reserved
	*
	* [25:27] = 110
	* SPI on PSC2
	* PSC2_0 -> MOSI
	* PSC2_1 -> MISO
	* PSC2_2 -> n/a
	* PSC2_3 -> CLK
	* PSC2_4 -> SS
	*
	* [24] = Reserved
	*
	* [20:23] = 0001
	* USB on PSC3
	* PSC3_0 -> USB_OE OE out
	* PSC3_1 -> USB_TXN Tx- out
	* PSC3_2 -> USB_TXP Tx+ out
	* PSC3_3 -> USB_TXD
	* PSC3_4 -> USB_RXP Rx+ in
	* PSC3_5 -> USB_RXN Rx- in
	* PSC3_6 -> USB_PWR PortPower out
	* PSC3_7 -> USB_SPEED speed out
	* PSC3_8 -> USB_SUSPEND suspend
	* PSC3_9 -> USB_OVRCURNT overcurrent in
	*
	* [18:19] = 10
	* Two UARTs
	*
	* [17] = 0
	* USB differential mode
	*
	* [16] = 1
	* PCI disabled
	*
	* [12:15] = 0101
	* Ethernet 100Mbit with MD
	* ETH_0 -> ETH Txen
	* ETH_1 -> ETH TxD0
	* ETH_2 -> ETH TxD1
	* ETH_3 -> ETH TxD2
	* ETH_4 -> ETH TxD3
	* ETH_5 -> ETH Txerr
	* ETH_6 -> ETH MDC
	* ETH_7 -> ETH MDIO
	* ETH_8 -> ETH RxDv
	* ETH_9 -> ETH RxCLK
	* ETH_10 -> ETH Collision
	* ETH_11 -> ETH TxD
	* ETH_12 -> ETH RxD0
	* ETH_13 -> ETH RxD1
	* ETH_14 -> ETH RxD2
	* ETH_15 -> ETH RxD3
	* ETH_16 -> ETH Rxerr
	* ETH_17 -> ETH CRS
	*
	* [9:11] = 111
	* SPI on PSC6
	* PSC6_0 -> MISO
	* PSC6_1 -> SS#
	* PSC6_2 -> MOSI
	* PSC6_3 -> CLK
	*
	* [8] = 0
	* IrDA/USB 48MHz clock generated internally
	*
	* [6:7] = 01
	* ATA chip selects on csb_4/5
	* CSB_4 -> ATA_CS0 out
	* CSB_5 -> ATA_CS1 out
	*
	* [5] = 1
	* PSC3_4 is used as CS6
	*
	* [4] = 1
	* PSC3_5 is used as CS7
	*
	* [2:3] = 00
	* No Alternatives
	*
	* [1] = 0
	* gpio_wkup_7 is GPIO
	*
	* [0] = 0
	* gpio_wkup_6 is GPIO
	*
	*/
	#define CONFIG_SYS_GPS_PORT_CONFIG 0x0d75a162

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */

	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */

	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	/* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CONFIG_DISPLAY_BOARDINFO 1

	#define CONFIG_SYS_HUSH_PARSER 1
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

	#define CONFIG_CRC32_VERIFY 1

	#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT \| \
	CONFIG_BOOTP_DNS \| \
	CONFIG_BOOTP_DNS2 \| \
	CONFIG_BOOTP_SEND_HOSTNAME )

	#define CONFIG_VERSION_VARIABLE 1

	/*
	* Various low-level settings
	*/
	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
	#define CONFIG_SYS_HID0_FINAL HID0_ICE

	/* no burst access on the LPB */
	#define CONFIG_SYS_CS_BURST 0x00000000
	/* one deadcycle for the 33MHz statemachine */
	#define CONFIG_SYS_CS_DEADCYCLE 0x33333331

	#define CONFIG_SYS_BOOTCS_CFG 0x0002d900
	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE

	#define CONFIG_SYS_RESET_ADDRESS 0xff000000

	/*
	* USB settings
	*/
	#define CONFIG_USB_CLOCK 0x0001bbbb
	/* USB is on PSC3 */
	#define CONFIG_PSC3_USB
	#define CONFIG_USB_CONFIG 0x00000100
	#define CONFIG_USB_OHCI
	#define CONFIG_USB_STORAGE

	/*
	* IDE/ATA stuff Supports IDE harddisk
	*/
	#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	#undef CONFIG_IDE_LED /* LED for ide not supported */

	#define CONFIG_IDE_RESET 1 /* reset for ide supported */
	#define CONFIG_IDE_PREINIT
	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
	#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
	/* Offset for data I/O */
	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
	/* Offset for normal register accesses */
	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
	/* Offset for alternate registers */
	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
	/* Interval between registers */
	#define CONFIG_SYS_ATA_STRIDE 4
	#define CONFIG_ATAPI 1

	/* we enable IDE and FAT support, so we also need partition support */
	#define CONFIG_DOS_PARTITION 1

	/*
	* Open Firmware flat tree
	*/
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_OF_BOARD_SETUP 1

	#define OF_CPU "PowerPC,5200@0"
	#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN
	#define OF_SOC "soc5200@f0000000"
	#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2600"

	#endif /* __CONFIG_H */