blob: 1f6a34b3d9434de5c7f945e48e94ba7125e246e4 [file] [log] [blame]
/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
extern void pci_of_setup(void *blob, bd_t *bd);
#include "cpld.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
u8 sw;
struct cpu_type *cpu = gd->cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
printf("Board: %sRDB, ", cpu->name);
printf("CPLD version: %d.%d ", CPLD_READ(cpld_ver),
CPLD_READ(cpld_ver_sub));
sw = CPLD_READ(fbank_sel);
printf("vBank: %d\n", sw & 0x1);
#ifdef CONFIG_PHYS_64BIT
puts("36-bit Addressing\n");
#endif
/*
* Display the RCW, so that no one gets confused as to what RCW
* we're actually using for this boot.
*/
puts("Reset Configuration Word (RCW):");
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
u32 rcw = in_be32(&gur->rcwsr[i]);
if ((i % 4) == 0)
printf("\n %08x:", i * 4);
printf(" %08x", rcw);
}
puts("\n");
/*
* Display the actual SERDES reference clocks as configured by the
* dip switches on the board. Note that the SWx registers could
* technically be set to force the reference clocks to match the
* values that the SERDES expects (or vice versa). For now, however,
* we just display both values and hope the user notices when they
* don't match.
*/
puts("SERDES Reference Clocks: ");
sw = in_8(&CPLD_SW(2)) >> 2;
for (i = 0; i < 2; i++) {
static const char * const freq[][3] = {{"0", "100", "125"},
{"100", "156.25", "125"}
};
unsigned int clock = (sw >> (2 * i)) & 3;
printf("Bank%u=%sMhz ", i+1, freq[i][clock]);
}
puts("\n");
return 0;
}
int board_early_init_f(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */
setbits_be32(&gur->ddrclkdr, 0x000f000f);
return 0;
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
set_liodns();
setup_portals();
return 0;
}
unsigned long get_board_sys_clk(unsigned long dummy)
{
u8 sysclk_conf = CPLD_READ(sysclk_sw1);
switch (sysclk_conf & 0x7) {
case CPLD_SYSCLK_83:
return 83333333;
case CPLD_SYSCLK_100:
return 100000000;
default:
return 66666666;
}
}
static const char *serdes_clock_to_string(u32 clock)
{
switch (clock) {
case SRDS_PLLCR0_RFCK_SEL_100:
return "100";
case SRDS_PLLCR0_RFCK_SEL_125:
return "125";
case SRDS_PLLCR0_RFCK_SEL_156_25:
return "156.25";
default:
return "150";
}
}
#define NUM_SRDS_BANKS 2
int misc_init_r(void)
{
serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
u8 sw;
static const int freq[][3] = {
{0, SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_125},
{SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_156_25,
SRDS_PLLCR0_RFCK_SEL_125}
};
sw = in_8(&CPLD_SW(2)) >> 2;
for (i = 0; i < NUM_SRDS_BANKS; i++) {
unsigned int clock = (sw >> (2 * i)) & 3;
if (clock == 0x3) {
printf("Warning: SDREFCLK%u switch setting of '11' is "
"unsupported\n", i + 1);
break;
}
if (i == 0 && clock == 0)
puts("Warning: SDREFCLK1 switch setting of"
"'00' is unsupported\n");
else
actual[i] = freq[i][clock];
}
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 expected = in_be32(&regs->bank[i].pllcr0);
expected &= SRDS_PLLCR0_RFCK_SEL_MASK;
if (expected != actual[i]) {
printf("Warning: SERDES bank %u expects reference clock"
" %sMHz, but actual is %sMHz\n", i + 1,
serdes_clock_to_string(expected),
serdes_clock_to_string(actual[i]));
}
}
return 0;
}
void ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#ifdef CONFIG_PCI
pci_of_setup(blob, bd);
#endif
fdt_fixup_liodn(blob);
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
}