blob: bd1bbee410ba35bc6c17a539d4ae38422c82093f [file] [log] [blame]
/*
* Sunxi usb-phy code
*
* Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
*
* Based on code from
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/usb_phy.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <errno.h>
#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
#ifdef CONFIG_MACH_SUN8I_A33
#define SUNXI_USB_CSR 0x410
#else
#define SUNXI_USB_CSR 0x404
#endif
#define SUNXI_USB_PASSBY_EN 1
#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
#define REG_PHY_UNK_H3 0x420
#define REG_PMU_UNK_H3 0x810
/* A83T specific control bits for PHY0 */
#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5)
#define SUNXI_PHY_CTL_SIDDQ BIT(3)
/* A83T HSIC specific bits */
#define SUNXI_EHCI_HS_FORCE BIT(20)
#define SUNXI_EHCI_CONNECT_DET BIT(17)
#define SUNXI_EHCI_CONNECT_INT BIT(16)
#define SUNXI_EHCI_HSIC BIT(1)
static struct sunxi_usb_phy {
int usb_rst_mask;
int gpio_vbus;
int gpio_vbus_det;
int gpio_id_det;
int id;
int init_count;
int power_on_count;
ulong base;
} sunxi_usb_phy[] = {
{
.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
.id = 0,
.base = SUNXI_USB0_BASE,
},
{
.usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
.id = 1,
.base = SUNXI_USB1_BASE,
},
#if CONFIG_SUNXI_USB_PHYS >= 3
{
#ifdef CONFIG_MACH_SUN8I_A83T
.usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
CCM_USB_CTRL_12M_CLK,
#else
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
#endif
.id = 2,
.base = SUNXI_USB2_BASE,
},
#endif
#if CONFIG_SUNXI_USB_PHYS >= 4
{
.usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK,
.id = 3,
.base = SUNXI_USB3_BASE,
}
#endif
};
static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY;
static int get_vbus_gpio(int index)
{
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
}
return -EINVAL;
}
static int get_vbus_detect_gpio(int index)
{
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
}
return -EINVAL;
}
static int get_id_detect_gpio(int index)
{
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
}
return -EINVAL;
}
__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
int data, int len)
{
int j = 0, usbc_bit = 0;
void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
#ifdef CONFIG_MACH_SUN8I_A33
/* CSR needs to be explicitly initialized to 0 on A33 */
writel(0, dest);
#endif
usbc_bit = 1 << (phy->id * 2);
for (j = 0; j < len; j++) {
/* set the bit address to be written */
clrbits_le32(dest, 0xff << 8);
setbits_le32(dest, (addr + j) << 8);
clrbits_le32(dest, usbc_bit);
/* set data bit */
if (data & 0x1)
setbits_le32(dest, 1 << 7);
else
clrbits_le32(dest, 1 << 7);
setbits_le32(dest, usbc_bit);
clrbits_le32(dest, usbc_bit);
data >>= 1;
}
}
#if defined CONFIG_MACH_SUN8I_H3
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
if (phy->id == 0)
clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
}
#elif defined CONFIG_MACH_SUN8I_A83T
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
}
#else
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
/* The following comments are machine
* translated from Chinese, you have been warned!
*/
/* Regulation 45 ohms */
if (phy->id == 0)
usb_phy_write(phy, 0x0c, 0x01, 1);
/* adjust PHY's magnitude and rate */
usb_phy_write(phy, 0x20, 0x14, 5);
/* threshold adjustment disconnect */
#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I
usb_phy_write(phy, 0x2a, 2, 2);
#else
usb_phy_write(phy, 0x2a, 3, 2);
#endif
return;
}
#endif
static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
{
unsigned long bits = 0;
void *addr;
addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE;
bits = SUNXI_EHCI_AHB_ICHR8_EN |
SUNXI_EHCI_AHB_INCR4_BURST_EN |
SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
SUNXI_EHCI_ULPI_BYPASS_EN;
#ifdef CONFIG_MACH_SUN8I_A83T
if (phy->id == 2)
bits |= SUNXI_EHCI_HS_FORCE |
SUNXI_EHCI_CONNECT_INT |
SUNXI_EHCI_HSIC;
#endif
if (enable)
setbits_le32(addr, bits);
else
clrbits_le32(addr, bits);
return;
}
void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
{
#ifndef CONFIG_MACH_SUN8I_A83T
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
#endif
}
void sunxi_usb_phy_init(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
phy->init_count++;
if (phy->init_count != 1)
return;
setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
sunxi_usb_phy_config(phy);
if (phy->id != 0)
sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
#ifdef CONFIG_MACH_SUN8I_A83T
if (phy->id == 0) {
setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
SUNXI_PHY_CTL_VBUSVLDEXT);
clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
SUNXI_PHY_CTL_SIDDQ);
}
#endif
}
void sunxi_usb_phy_exit(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
phy->init_count--;
if (phy->init_count != 0)
return;
if (phy->id != 0)
sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
#ifdef CONFIG_MACH_SUN8I_A83T
if (phy->id == 0) {
setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
SUNXI_PHY_CTL_SIDDQ);
}
#endif
clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
}
void sunxi_usb_phy_power_on(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
if (initial_usb_scan_delay) {
mdelay(initial_usb_scan_delay);
initial_usb_scan_delay = 0;
}
phy->power_on_count++;
if (phy->power_on_count != 1)
return;
if (phy->gpio_vbus >= 0)
gpio_set_value(phy->gpio_vbus, 1);
}
void sunxi_usb_phy_power_off(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
phy->power_on_count--;
if (phy->power_on_count != 0)
return;
if (phy->gpio_vbus >= 0)
gpio_set_value(phy->gpio_vbus, 0);
}
int sunxi_usb_phy_vbus_detect(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
int err, retries = 3;
if (phy->gpio_vbus_det < 0)
return phy->gpio_vbus_det;
err = gpio_get_value(phy->gpio_vbus_det);
/*
* Vbus may have been provided by the board and just been turned of
* some milliseconds ago on reset, what we're measuring then is a
* residual charge on Vbus, sleep a bit and try again.
*/
while (err > 0 && retries--) {
mdelay(100);
err = gpio_get_value(phy->gpio_vbus_det);
}
return err;
}
int sunxi_usb_phy_id_detect(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
if (phy->gpio_id_det < 0)
return phy->gpio_id_det;
return gpio_get_value(phy->gpio_id_det);
}
int sunxi_usb_phy_probe(void)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_usb_phy *phy;
int i, ret = 0;
for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
phy = &sunxi_usb_phy[i];
phy->gpio_vbus = get_vbus_gpio(i);
if (phy->gpio_vbus >= 0) {
ret = gpio_request(phy->gpio_vbus, "usb_vbus");
if (ret)
return ret;
ret = gpio_direction_output(phy->gpio_vbus, 0);
if (ret)
return ret;
}
phy->gpio_vbus_det = get_vbus_detect_gpio(i);
if (phy->gpio_vbus_det >= 0) {
ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
if (ret)
return ret;
ret = gpio_direction_input(phy->gpio_vbus_det);
if (ret)
return ret;
}
phy->gpio_id_det = get_id_detect_gpio(i);
if (phy->gpio_id_det >= 0) {
ret = gpio_request(phy->gpio_id_det, "usb_id_det");
if (ret)
return ret;
ret = gpio_direction_input(phy->gpio_id_det);
if (ret)
return ret;
sunxi_gpio_set_pull(phy->gpio_id_det,
SUNXI_GPIO_PULL_UP);
}
}
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
return 0;
}
int sunxi_usb_phy_remove(void)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_usb_phy *phy;
int i;
clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
phy = &sunxi_usb_phy[i];
if (phy->gpio_vbus >= 0)
gpio_free(phy->gpio_vbus);
if (phy->gpio_vbus_det >= 0)
gpio_free(phy->gpio_vbus_det);
if (phy->gpio_id_det >= 0)
gpio_free(phy->gpio_id_det);
}
return 0;
}