| After several heart-struck failure, I got one workable way to program |
| each other in FLASH between PlanetCore and U-Boot. |
| |
| Hardware Platform : RPXlite DW(EP 823 H1 DW) |
| |
| 1. From U-Boot to PlanetCore |
| |
| Utilities : PlanetCore Boot Loader - PCL200.mot |
| |
| [root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot |
| PCL200.mot pcl200.bin |
| |
| [Target Operation] |
| u-boot>t 100000 pcl200.bin |
| u-boot>go 0x100000 |
| ## Starting application at 0x00100000 ... |
| |
| MPC8xx PlanetCore Flash Burner v2.00 |
| Copyright 2001 Embedded Planet. All rights reserved. |
| |
| Construct Flash Device.....done. |
| |
| |
| Program MPC8xx PlanetCore Boot Loader v2.00 |
| Built Sep 19, 2001 at 14:34:42 |
| Image located from FC000000 to FC01B5D1. |
| (Skipping an image, only loading low boot image) |
| |
| Low boot board detected, skipping high boot image. |
| Erasing, programming and verifying will start in 20 |
| seconds |
| Press P to start immediately or ESC to cancel |
| Press Space or Enter for more options. |
| .............. |
| |
| Erasing |
| Programming |
| FLASH programmed successfully! |
| Press R to induce a hard reset |
| |
| MPC8xx PlanetCore Boot Loader v2.00 |
| Copyright 2001 Embedded Planet. All rights reserved. |
| DRAM available size = 64 MB |
| wvCV |
| DRAM OK |
| > |
| |
| 2. From PlanetCore to U-Boot |
| |
| Utilities : PlanetCore FLASH Burner - PCB200.mot |
| |
| Use Flash Burner to finish the work: |
| |
| First, TFTP the U-Boot image file to RAM; For example, |
| RPXlite_DW.bin to 0x400000 |
| Second, TFTP FLASH Burner to RAM; For example, |
| 0x100000 |
| Third, run the FLASH Burner and Program the U-Boot |
| image into the correct location in FLASH. |
| |
| [Target Operation] |
| MPC8xx PlanetCore Boot Loader v2.00 |
| Copyright 2001 Embedded Planet. All rights reserved. |
| DRAM available size = 64 MB |
| wvCV |
| DRAM OK |
| >t |
| Load using tftp via Ethernet |
| Enter server IP address <172.16.115.6> : |
| Enter server filename <PCL200.mot> : RPXlite_DW.bin |
| Enter (B)inary or (S)record input mode <S> : B |
| Enter address offset : <00400000 hex> : |
| |
| Total bytes = 120096 in 232184 uSecs |
| Loaded addresses 00400000 through 0041D51F. |
| Start address = 00400000 |
| >t |
| Load using tftp via Ethernet |
| Enter server IP address <172.16.115.6> : |
| Enter server filename <RPXlite_DW.bin> : PCB200.mot |
| Enter (B)inary or (S)record input mode <B> : S |
| Enter address offset : <00000000 hex> : |
| .512.1024..2048....4096..... |
| Total bytes = 326280 in 2570249 uSecs |
| Loaded addresses 00100000 through 0011BB51. |
| Start address = 00100000 |
| >go |
| [Go 00100000] |
| |
| MPC8xx PlanetCore Flash Burner v2.00 |
| Copyright 2001 Embedded Planet. All rights reserved. |
| |
| Construct Flash Device.....done. |
| |
| Bad start address |
| Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length = |
| 0xFFFFFFFF |
| Forcing Menu Interface |
| |
| h[elp] Show commands. |
| c[ode] Show information on code to be loaded. |
| di[splay] Display all flash sections. |
| du[mp] Dump memory. d ? for more info. |
| e[rase] Erase flash sections. |
| f[ill] Fill flash sections. |
| im[age] Toggle load high, low, or both flash |
| images. |
| in[fo] Show flash information. |
| ma[p] Show memory map. |
| mo[dify] Modify memory. m ? for more info. |
| p[rogram] Erase, program, and verify now. |
| reset Restart the loader. |
| s[how] Show flash sections to erase and program. |
| t[est] Test flash sections. |
| q[uit] Quit without programming. |
| #program 400000 ff000000 1D51F |
| doProgram( 400000 ff000000 1D51F ) |
| |
| Start = 0x00400000, target = 0xFF000000, length = |
| 0x0001D51F |
| Erasing sector 0xFF000000, length 0x008000. |
| Erasing sector 0xFF008000, length 0x008000. |
| Erasing sector 0xFF010000, length 0x008000. |
| Erasing sector 0xFF018000, length 0x008000. |
| Programming FF000000 through FF01D51E |
| FLASH programmed successfully! |
| Press R to induce a hard reset |
| |
| Forcing Hard Reset by MachineCheck and |
| ResetOnCheckstop... |
| |
| U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) |
| |
| CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB |
| D-Cache |
| Board: RPXlite_DW |
| DRAM: 64 MB |
| FLASH: 16 MB |
| *** Warning - bad CRC, using default environment |
| |
| In: serial |
| Out: serial |
| Err: serial |
| Net: SCC ETHERNET |
| u-boot> |
| |
| ------------------------------------------------- |
| |
| Well, sometimes network function of PlanetCore couldn't work when |
| switching from U-Boot to PlanetCore. For example, you couldn't |
| download a file from HOST PC via TFTP. Don't worry, just restart your |
| HOST PC and everything would work as smooth as clockwork. I don't |
| know the reason WHY:-) |
| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| Merry Christmas and Happy New Year! |
| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| ===== |
| Best regards, |
| |
| Sam |