| /* |
| * (C) Copyright 2006 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * Port to AMCC-440SPE Evaluation Board SOP - April 2005 |
| * |
| * PCIe supporting routines derived from Linux 440SPe PCIe driver. |
| */ |
| |
| #include <common.h> |
| #include <ppc4xx.h> |
| #include <i2c.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/4xx_pcie.h> |
| |
| #include "yucca.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void fpga_init (void); |
| |
| #define DEBUG_ENV |
| #ifdef DEBUG_ENV |
| #define DEBUGF(fmt,args...) printf(fmt ,##args) |
| #else |
| #define DEBUGF(fmt,args...) |
| #endif |
| |
| #define FALSE 0 |
| #define TRUE 1 |
| |
| int board_early_init_f (void) |
| { |
| /*----------------------------------------------------------------------------+ |
| | Define Boot devices |
| +----------------------------------------------------------------------------*/ |
| #define BOOT_FROM_SMALL_FLASH 0x00 |
| #define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01 |
| #define BOOT_FROM_PCI 0x02 |
| #define BOOT_DEVICE_UNKNOWN 0x03 |
| |
| /*----------------------------------------------------------------------------+ |
| | EBC Devices Characteristics |
| | Peripheral Bank Access Parameters - EBC_BxAP |
| | Peripheral Bank Configuration Register - EBC_BxCR |
| +----------------------------------------------------------------------------*/ |
| |
| /* |
| * Small Flash and FRAM |
| * BU Value |
| * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 |
| * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000 |
| * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000 |
| */ |
| #define EBC_BXAP_SMALL_FLASH EBC_BXAP_BME_DISABLED | \ |
| EBC_BXAP_TWT_ENCODE(7) | \ |
| EBC_BXAP_BCE_DISABLE | \ |
| EBC_BXAP_BCT_2TRANS | \ |
| EBC_BXAP_CSN_ENCODE(0) | \ |
| EBC_BXAP_OEN_ENCODE(0) | \ |
| EBC_BXAP_WBN_ENCODE(0) | \ |
| EBC_BXAP_WBF_ENCODE(0) | \ |
| EBC_BXAP_TH_ENCODE(0) | \ |
| EBC_BXAP_RE_DISABLED | \ |
| EBC_BXAP_SOR_DELAYED | \ |
| EBC_BXAP_BEM_WRITEONLY | \ |
| EBC_BXAP_PEN_DISABLED |
| |
| #define EBC_BXCR_SMALL_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ |
| EBC_BXCR_BS_16MB | \ |
| EBC_BXCR_BU_RW | \ |
| EBC_BXCR_BW_8BIT |
| |
| #define EBC_BXCR_SMALL_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xe7000000) | \ |
| EBC_BXCR_BS_16MB | \ |
| EBC_BXCR_BU_RW | \ |
| EBC_BXCR_BW_8BIT |
| |
| /* |
| * Large Flash and SRAM |
| * BU Value |
| * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 |
| * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 |
| * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 |
| */ |
| #define EBC_BXAP_LARGE_FLASH EBC_BXAP_BME_DISABLED | \ |
| EBC_BXAP_TWT_ENCODE(7) | \ |
| EBC_BXAP_BCE_DISABLE | \ |
| EBC_BXAP_BCT_2TRANS | \ |
| EBC_BXAP_CSN_ENCODE(0) | \ |
| EBC_BXAP_OEN_ENCODE(0) | \ |
| EBC_BXAP_WBN_ENCODE(0) | \ |
| EBC_BXAP_WBF_ENCODE(0) | \ |
| EBC_BXAP_TH_ENCODE(0) | \ |
| EBC_BXAP_RE_DISABLED | \ |
| EBC_BXAP_SOR_DELAYED | \ |
| EBC_BXAP_BEM_WRITEONLY | \ |
| EBC_BXAP_PEN_DISABLED |
| |
| #define EBC_BXCR_LARGE_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ |
| EBC_BXCR_BS_16MB | \ |
| EBC_BXCR_BU_RW | \ |
| EBC_BXCR_BW_16BIT |
| |
| #define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \ |
| EBC_BXCR_BS_16MB | \ |
| EBC_BXCR_BU_RW | \ |
| EBC_BXCR_BW_16BIT |
| |
| /* |
| * FPGA |
| * BU value : |
| * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000 |
| * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000 |
| */ |
| #define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \ |
| EBC_BXAP_TWT_ENCODE(11) | \ |
| EBC_BXAP_BCE_DISABLE | \ |
| EBC_BXAP_BCT_2TRANS | \ |
| EBC_BXAP_CSN_ENCODE(10) | \ |
| EBC_BXAP_OEN_ENCODE(1) | \ |
| EBC_BXAP_WBN_ENCODE(1) | \ |
| EBC_BXAP_WBF_ENCODE(1) | \ |
| EBC_BXAP_TH_ENCODE(1) | \ |
| EBC_BXAP_RE_DISABLED | \ |
| EBC_BXAP_SOR_DELAYED | \ |
| EBC_BXAP_BEM_RW | \ |
| EBC_BXAP_PEN_DISABLED |
| |
| #define EBC_BXCR_FPGA_CS1 EBC_BXCR_BAS_ENCODE(0xe2000000) | \ |
| EBC_BXCR_BS_1MB | \ |
| EBC_BXCR_BU_RW | \ |
| EBC_BXCR_BW_16BIT |
| |
| unsigned long mfr; |
| /* |
| * Define Variables for EBC initialization depending on BOOTSTRAP option |
| */ |
| unsigned long sdr0_pinstp, sdr0_sdstp1 ; |
| unsigned long bootstrap_settings, ebc_data_width, boot_selection; |
| int computed_boot_device = BOOT_DEVICE_UNKNOWN; |
| |
| /*-------------------------------------------------------------------+ |
| | Initialize EBC CONFIG - |
| | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC |
| | default value : |
| | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 |
| | |
| +-------------------------------------------------------------------*/ |
| mtebc(xbcfg, EBC_CFG_LE_UNLOCK | |
| EBC_CFG_PTD_ENABLE | |
| EBC_CFG_RTC_16PERCLK | |
| EBC_CFG_ATC_PREVIOUS | |
| EBC_CFG_DTC_PREVIOUS | |
| EBC_CFG_CTC_PREVIOUS | |
| EBC_CFG_OEO_PREVIOUS | |
| EBC_CFG_EMC_DEFAULT | |
| EBC_CFG_PME_DISABLE | |
| EBC_CFG_PR_16); |
| |
| /*-------------------------------------------------------------------+ |
| | |
| | PART 1 : Initialize EBC Bank 1 |
| | ============================== |
| | Bank1 is always associated to the EPLD. |
| | It has to be initialized prior to other banks settings computation |
| | since some board registers values may be needed to determine the |
| | boot type |
| | |
| +-------------------------------------------------------------------*/ |
| mtebc(pb1ap, EBC_BXAP_FPGA); |
| mtebc(pb1cr, EBC_BXCR_FPGA_CS1); |
| |
| /*-------------------------------------------------------------------+ |
| | |
| | PART 2 : Determine which boot device was selected |
| | ================================================= |
| | |
| | Read Pin Strap Register in PPC440SPe |
| | Result can either be : |
| | - Boot strap = boot from EBC 8bits => Small Flash |
| | - Boot strap = boot from PCI |
| | - Boot strap = IIC |
| | In case of boot from IIC, read Serial Device Strap Register1 |
| | |
| | Result can either be : |
| | - Boot from EBC - EBC Bus Width = 8bits => Small Flash |
| | - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM |
| | - Boot from PCI |
| | |
| +-------------------------------------------------------------------*/ |
| /* Read Pin Strap Register in PPC440SP */ |
| mfsdr(SDR0_PINSTP, sdr0_pinstp); |
| bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK; |
| |
| switch (bootstrap_settings) { |
| case SDR0_PINSTP_BOOTSTRAP_SETTINGS0: |
| /* |
| * Strapping Option A |
| * Boot from EBC - 8 bits , Small Flash |
| */ |
| computed_boot_device = BOOT_FROM_SMALL_FLASH; |
| break; |
| case SDR0_PINSTP_BOOTSTRAP_SETTINGS1: |
| /* |
| * Strappping Option B |
| * Boot from PCI |
| */ |
| computed_boot_device = BOOT_FROM_PCI; |
| break; |
| case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN: |
| case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN: |
| /* |
| * Strapping Option C or D |
| * Boot Settings in IIC EEprom address 0x50 or 0x54 |
| * Read Serial Device Strap Register1 in PPC440SPe |
| */ |
| mfsdr(SDR0_SDSTP1, sdr0_sdstp1); |
| boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK; |
| ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK; |
| |
| switch (boot_selection) { |
| case SDR0_SDSTP1_ERPN_EBC: |
| switch (ebc_data_width) { |
| case SDR0_SDSTP1_EBCW_16_BITS: |
| computed_boot_device = |
| BOOT_FROM_LARGE_FLASH_OR_SRAM; |
| break; |
| case SDR0_SDSTP1_EBCW_8_BITS : |
| computed_boot_device = BOOT_FROM_SMALL_FLASH; |
| break; |
| } |
| break; |
| |
| case SDR0_SDSTP1_ERPN_PCI: |
| computed_boot_device = BOOT_FROM_PCI; |
| break; |
| default: |
| /* should not occure */ |
| computed_boot_device = BOOT_DEVICE_UNKNOWN; |
| } |
| break; |
| default: |
| /* should not be */ |
| computed_boot_device = BOOT_DEVICE_UNKNOWN; |
| break; |
| } |
| |
| /*-------------------------------------------------------------------+ |
| | |
| | PART 3 : Compute EBC settings depending on selected boot device |
| | ====== ====================================================== |
| | |
| | Resulting EBC init will be among following configurations : |
| | |
| | - Boot from EBC 8bits => boot from Small Flash selected |
| | EBC-CS0 = Small Flash |
| | EBC-CS2 = Large Flash and SRAM |
| | |
| | - Boot from EBC 16bits => boot from Large Flash or SRAM |
| | EBC-CS0 = Large Flash or SRAM |
| | EBC-CS2 = Small Flash |
| | |
| | - Boot from PCI |
| | EBC-CS0 = not initialized to avoid address contention |
| | EBC-CS2 = same as boot from Small Flash selected |
| | |
| +-------------------------------------------------------------------*/ |
| unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0; |
| unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0; |
| |
| switch (computed_boot_device) { |
| /*-------------------------------------------------------------------*/ |
| case BOOT_FROM_PCI: |
| /*-------------------------------------------------------------------*/ |
| /* |
| * By Default CS2 is affected to LARGE Flash |
| * do not initialize SMALL FLASH to avoid address contention |
| * Large Flash |
| */ |
| ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; |
| ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; |
| break; |
| |
| /*-------------------------------------------------------------------*/ |
| case BOOT_FROM_SMALL_FLASH: |
| /*-------------------------------------------------------------------*/ |
| ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH; |
| ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0; |
| |
| /* |
| * Large Flash or SRAM |
| */ |
| /* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */ |
| ebc0_cs2_bxap_value = 0x048ff240; |
| ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; |
| break; |
| |
| /*-------------------------------------------------------------------*/ |
| case BOOT_FROM_LARGE_FLASH_OR_SRAM: |
| /*-------------------------------------------------------------------*/ |
| ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH; |
| ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0; |
| |
| /* Small flash */ |
| ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH; |
| ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2; |
| break; |
| |
| /*-------------------------------------------------------------------*/ |
| default: |
| /*-------------------------------------------------------------------*/ |
| /* BOOT_DEVICE_UNKNOWN */ |
| break; |
| } |
| |
| mtebc(pb0ap, ebc0_cs0_bxap_value); |
| mtebc(pb0cr, ebc0_cs0_bxcr_value); |
| mtebc(pb2ap, ebc0_cs2_bxap_value); |
| mtebc(pb2cr, ebc0_cs2_bxcr_value); |
| |
| /*--------------------------------------------------------------------+ |
| | Interrupt controller setup for the AMCC 440SPe Evaluation board. |
| +--------------------------------------------------------------------+ |
| +---------------------------------------------------------------------+ |
| |Interrupt| Source | Pol. | Sensi.| Crit. | |
| +---------+-----------------------------------+-------+-------+-------+ |
| | IRQ 00 | UART0 | High | Level | Non | |
| | IRQ 01 | UART1 | High | Level | Non | |
| | IRQ 02 | IIC0 | High | Level | Non | |
| | IRQ 03 | IIC1 | High | Level | Non | |
| | IRQ 04 | PCI0X0 MSG IN | High | Level | Non | |
| | IRQ 05 | PCI0X0 CMD Write | High | Level | Non | |
| | IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | |
| | IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | |
| | IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | |
| | IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | |
| | IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | |
| | IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | |
| | IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | |
| | IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | |
| | IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | |
| | IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | |
| | IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | |
| | IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | |
| | IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | |
| | IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | |
| | IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | |
| | IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | |
| | IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | |
| | IRQ 23 | I2O Inbound Doorbell | High | Level | Non | |
| | IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | |
| | IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | |
| | IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | |
| | IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | |
| | IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | |
| | IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | |
| | IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | |
| | IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | |
| |---------------------------------------------------------------------- |
| | IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | |
| | IRQ 33 | MAL Serr | High | Level | Non | |
| | IRQ 34 | MAL Txde | High | Level | Non | |
| | IRQ 35 | MAL Rxde | High | Level | Non | |
| | IRQ 36 | DMC CE or DMC UE | High | Level | Non | |
| | IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | |
| | IRQ 38 | MAL TX EOB | High | Level | Non | |
| | IRQ 39 | MAL RX EOB | High | Level | Non | |
| | IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | |
| | IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | |
| | IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | |
| | IRQ 43 | L2 Cache | Risin | Edge | Non | |
| | IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | |
| | IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | |
| | IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | |
| | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | |
| | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | |
| | IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | |
| | IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | |
| | IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | |
| | IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | |
| | IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | |
| | IRQ 54 | DMA Error | High | Level | Non | |
| | IRQ 55 | DMA I2O Error | High | Level | Non | |
| | IRQ 56 | Serial ROM | High | Level | Non | |
| | IRQ 57 | PCIX0 Error | High | Edge | Non | |
| | IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | |
| | IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | |
| | IRQ 60 | EMAC0 Interrupt | High | Level | Non | |
| | IRQ 61 | EMAC0 Wake-up | High | Level | Non | |
| | IRQ 62 | Reserved | High | Level | Non | |
| | IRQ 63 | XOR | High | Level | Non | |
| |---------------------------------------------------------------------- |
| | IRQ 64 | PE0 AL | High | Level | Non | |
| | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | |
| | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | |
| | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | |
| | IRQ 68 | PE0 TCR | High | Level | Non | |
| | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | |
| | IRQ 70 | PE0 DCR Error | High | Level | Non | |
| | IRQ 71 | Reserved | N/A | N/A | Non | |
| | IRQ 72 | PE1 AL | High | Level | Non | |
| | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | |
| | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | |
| | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | |
| | IRQ 76 | PE1 TCR | High | Level | Non | |
| | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | |
| | IRQ 78 | PE1 DCR Error | High | Level | Non | |
| | IRQ 79 | Reserved | N/A | N/A | Non | |
| | IRQ 80 | PE2 AL | High | Level | Non | |
| | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | |
| | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | |
| | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | |
| | IRQ 84 | PE2 TCR | High | Level | Non | |
| | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | |
| | IRQ 86 | PE2 DCR Error | High | Level | Non | |
| | IRQ 87 | Reserved | N/A | N/A | Non | |
| | IRQ 88 | External IRQ(5) | Progr | Progr | Non | |
| | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | |
| | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | |
| | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | |
| | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | |
| | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | |
| | IRQ 94 | Reserved | N/A | N/A | Non | |
| | IRQ 95 | Reserved | N/A | N/A | Non | |
| |--------------------------------------------------------------------- |
| | IRQ 96 | PE0 INTA | High | Level | Non | |
| | IRQ 97 | PE0 INTB | High | Level | Non | |
| | IRQ 98 | PE0 INTC | High | Level | Non | |
| | IRQ 99 | PE0 INTD | High | Level | Non | |
| | IRQ 100 | PE1 INTA | High | Level | Non | |
| | IRQ 101 | PE1 INTB | High | Level | Non | |
| | IRQ 102 | PE1 INTC | High | Level | Non | |
| | IRQ 103 | PE1 INTD | High | Level | Non | |
| | IRQ 104 | PE2 INTA | High | Level | Non | |
| | IRQ 105 | PE2 INTB | High | Level | Non | |
| | IRQ 106 | PE2 INTC | High | Level | Non | |
| | IRQ 107 | PE2 INTD | Risin | Edge | Non | |
| | IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | |
| | IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | |
| | IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | |
| | IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | |
| | IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | |
| | IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | |
| | IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | |
| | IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | |
| | IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | |
| | IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | |
| | IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | |
| | IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | |
| | IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | |
| | IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | |
| | IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | |
| | IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | |
| | IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | |
| | IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | |
| | IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | |
| | IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | |
| +---------+-----------------------------------+-------+-------+------*/ |
| /*--------------------------------------------------------------------+ |
| | Put UICs in PowerPC440SPemode. |
| | Initialise UIC registers. Clear all interrupts. Disable all |
| | interrupts. |
| | Set critical interrupt values. Set interrupt polarities. Set |
| | interrupt trigger levels. Make bit 0 High priority. Clear all |
| | interrupts again. |
| +-------------------------------------------------------------------*/ |
| mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ |
| mtdcr (uic3er, 0x00000000); /* disable all interrupts */ |
| mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical |
| * interrupts */ |
| mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */ |
| mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ |
| mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest |
| * priority */ |
| mtdcr (uic3sr, 0x00000000); /* clear all interrupts */ |
| mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */ |
| |
| mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ |
| mtdcr (uic2er, 0x00000000); /* disable all interrupts */ |
| mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical |
| * interrupts */ |
| mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */ |
| mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ |
| mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest |
| * priority */ |
| mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ |
| mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ |
| |
| mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ |
| mtdcr (uic1er, 0x00000000); /* disable all interrupts */ |
| mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical |
| * interrupts */ |
| mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ |
| mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */ |
| mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest |
| * priority */ |
| mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ |
| mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ |
| |
| mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ |
| mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted |
| * cascade to be checked */ |
| mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical |
| * interrupts */ |
| mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */ |
| mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ |
| mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest |
| * priority */ |
| mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ |
| mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ |
| |
| mfsdr(sdr_mfr, mfr); |
| mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ |
| mtsdr(sdr_mfr, mfr); |
| |
| fpga_init(); |
| |
| return 0; |
| } |
| |
| int checkboard (void) |
| { |
| char *s = getenv("serial#"); |
| |
| printf("Board: Yucca - AMCC 440SPe Evaluation Board"); |
| if (s != NULL) { |
| puts(", serial# "); |
| puts(s); |
| } |
| putc('\n'); |
| |
| return 0; |
| } |
| |
| /* |
| * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with |
| * board specific values. |
| */ |
| static int ppc440spe_rev_a(void) |
| { |
| if ((get_pvr() == PVR_440SPe_6_RA) || (get_pvr() == PVR_440SPe_RA)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| u32 ddr_wrdtr(u32 default_val) { |
| /* |
| * Yucca boards with 440SPe rev. A need a slightly different setup |
| * for the MCIF0_WRDTR register. |
| */ |
| if (ppc440spe_rev_a()) |
| return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_270_DEG_ADV); |
| |
| return default_val; |
| } |
| |
| u32 ddr_clktr(u32 default_val) { |
| /* |
| * Yucca boards with 440SPe rev. A need a slightly different setup |
| * for the MCIF0_CLKTR register. |
| */ |
| if (ppc440spe_rev_a()) |
| return (SDRAM_CLKTR_CLKP_180_DEG_ADV); |
| |
| return default_val; |
| } |
| |
| /************************************************************************* |
| * pci_pre_init |
| * |
| * This routine is called just prior to registering the hose and gives |
| * the board the opportunity to check things. Returning a value of zero |
| * indicates that things are bad & PCI initialization should be aborted. |
| * |
| * Different boards may wish to customize the pci controller structure |
| * (add regions, override default access routines, etc) or perform |
| * certain pre-initialization actions. |
| * |
| ************************************************************************/ |
| #if defined(CONFIG_PCI) |
| int pci_pre_init(struct pci_controller * hose ) |
| { |
| unsigned long strap; |
| |
| /*-------------------------------------------------------------------+ |
| * The yucca board is always configured as the host & requires the |
| * PCI arbiter to be enabled. |
| *-------------------------------------------------------------------*/ |
| mfsdr(sdr_sdstp1, strap); |
| if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { |
| printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); |
| return 0; |
| } |
| |
| return 1; |
| } |
| #endif /* defined(CONFIG_PCI) */ |
| |
| /************************************************************************* |
| * pci_target_init |
| * |
| * The bootstrap configuration provides default settings for the pci |
| * inbound map (PIM). But the bootstrap config choices are limited and |
| * may not be sufficient for a given board. |
| * |
| ************************************************************************/ |
| #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) |
| void pci_target_init(struct pci_controller * hose ) |
| { |
| /*-------------------------------------------------------------------+ |
| * Disable everything |
| *-------------------------------------------------------------------*/ |
| out32r( PCIX0_PIM0SA, 0 ); /* disable */ |
| out32r( PCIX0_PIM1SA, 0 ); /* disable */ |
| out32r( PCIX0_PIM2SA, 0 ); /* disable */ |
| out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ |
| |
| /*-------------------------------------------------------------------+ |
| * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 |
| * strapping options to not support sizes such as 128/256 MB. |
| *-------------------------------------------------------------------*/ |
| out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); |
| out32r( PCIX0_PIM0LAH, 0 ); |
| out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); |
| out32r( PCIX0_BAR0, 0 ); |
| |
| /*-------------------------------------------------------------------+ |
| * Program the board's subsystem id/vendor id |
| *-------------------------------------------------------------------*/ |
| out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); |
| out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); |
| |
| out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); |
| } |
| #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ |
| |
| #if defined(CONFIG_PCI) |
| /************************************************************************* |
| * is_pci_host |
| * |
| * This routine is called to determine if a pci scan should be |
| * performed. With various hardware environments (especially cPCI and |
| * PPMC) it's insufficient to depend on the state of the arbiter enable |
| * bit in the strap register, or generic host/adapter assumptions. |
| * |
| * Rather than hard-code a bad assumption in the general 440 code, the |
| * 440 pci code requires the board to decide at runtime. |
| * |
| * Return 0 for adapter mode, non-zero for host (monarch) mode. |
| * |
| * |
| ************************************************************************/ |
| int is_pci_host(struct pci_controller *hose) |
| { |
| /* The yucca board is always configured as host. */ |
| return 1; |
| } |
| |
| int yucca_pcie_card_present(int port) |
| { |
| u16 reg; |
| |
| reg = in_be16((u16 *)FPGA_REG1C); |
| switch(port) { |
| case 0: |
| return !(reg & FPGA_REG1C_PE0_PRSNT); |
| case 1: |
| return !(reg & FPGA_REG1C_PE1_PRSNT); |
| case 2: |
| return !(reg & FPGA_REG1C_PE2_PRSNT); |
| default: |
| return 0; |
| } |
| } |
| |
| /* |
| * For the given slot, set rootpoint mode, send power to the slot, |
| * turn on the green LED and turn off the yellow LED, enable the clock |
| * and turn off reset. |
| */ |
| void yucca_setup_pcie_fpga_rootpoint(int port) |
| { |
| u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; |
| |
| switch(port) { |
| case 0: |
| rootpoint = FPGA_REG1C_PE0_ROOTPOINT; |
| endpoint = 0; |
| power = FPGA_REG1A_PE0_PWRON; |
| green_led = FPGA_REG1A_PE0_GLED; |
| clock = FPGA_REG1A_PE0_REFCLK_ENABLE; |
| yellow_led = FPGA_REG1A_PE0_YLED; |
| reset_off = FPGA_REG1C_PE0_PERST; |
| break; |
| case 1: |
| rootpoint = 0; |
| endpoint = FPGA_REG1C_PE1_ENDPOINT; |
| power = FPGA_REG1A_PE1_PWRON; |
| green_led = FPGA_REG1A_PE1_GLED; |
| clock = FPGA_REG1A_PE1_REFCLK_ENABLE; |
| yellow_led = FPGA_REG1A_PE1_YLED; |
| reset_off = FPGA_REG1C_PE1_PERST; |
| break; |
| case 2: |
| rootpoint = 0; |
| endpoint = FPGA_REG1C_PE2_ENDPOINT; |
| power = FPGA_REG1A_PE2_PWRON; |
| green_led = FPGA_REG1A_PE2_GLED; |
| clock = FPGA_REG1A_PE2_REFCLK_ENABLE; |
| yellow_led = FPGA_REG1A_PE2_YLED; |
| reset_off = FPGA_REG1C_PE2_PERST; |
| break; |
| |
| default: |
| return; |
| } |
| |
| out_be16((u16 *)FPGA_REG1A, |
| ~(power | clock | green_led) & |
| (yellow_led | in_be16((u16 *)FPGA_REG1A))); |
| |
| out_be16((u16 *)FPGA_REG1C, |
| ~(endpoint | reset_off) & |
| (rootpoint | in_be16((u16 *)FPGA_REG1C))); |
| /* |
| * Leave device in reset for a while after powering on the |
| * slot to give it a chance to initialize. |
| */ |
| udelay(250 * 1000); |
| |
| out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); |
| } |
| /* |
| * For the given slot, set endpoint mode, send power to the slot, |
| * turn on the green LED and turn off the yellow LED, enable the clock |
| * .In end point mode reset bit is read only. |
| */ |
| void yucca_setup_pcie_fpga_endpoint(int port) |
| { |
| u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; |
| |
| switch(port) { |
| case 0: |
| rootpoint = FPGA_REG1C_PE0_ROOTPOINT; |
| endpoint = 0; |
| power = FPGA_REG1A_PE0_PWRON; |
| green_led = FPGA_REG1A_PE0_GLED; |
| clock = FPGA_REG1A_PE0_REFCLK_ENABLE; |
| yellow_led = FPGA_REG1A_PE0_YLED; |
| reset_off = FPGA_REG1C_PE0_PERST; |
| break; |
| case 1: |
| rootpoint = 0; |
| endpoint = FPGA_REG1C_PE1_ENDPOINT; |
| power = FPGA_REG1A_PE1_PWRON; |
| green_led = FPGA_REG1A_PE1_GLED; |
| clock = FPGA_REG1A_PE1_REFCLK_ENABLE; |
| yellow_led = FPGA_REG1A_PE1_YLED; |
| reset_off = FPGA_REG1C_PE1_PERST; |
| break; |
| case 2: |
| rootpoint = 0; |
| endpoint = FPGA_REG1C_PE2_ENDPOINT; |
| power = FPGA_REG1A_PE2_PWRON; |
| green_led = FPGA_REG1A_PE2_GLED; |
| clock = FPGA_REG1A_PE2_REFCLK_ENABLE; |
| yellow_led = FPGA_REG1A_PE2_YLED; |
| reset_off = FPGA_REG1C_PE2_PERST; |
| break; |
| |
| default: |
| return; |
| } |
| |
| out_be16((u16 *)FPGA_REG1A, |
| ~(power | clock | green_led) & |
| (yellow_led | in_be16((u16 *)FPGA_REG1A))); |
| |
| out_be16((u16 *)FPGA_REG1C, |
| ~(rootpoint | reset_off) & |
| (endpoint | in_be16((u16 *)FPGA_REG1C))); |
| } |
| |
| static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; |
| |
| void pcie_setup_hoses(int busno) |
| { |
| struct pci_controller *hose; |
| int i, bus; |
| int ret = 0; |
| char *env; |
| unsigned int delay; |
| |
| /* |
| * assume we're called after the PCIX hose is initialized, which takes |
| * bus ID 0 and therefore start numbering PCIe's from 1. |
| */ |
| bus = busno; |
| for (i = 0; i <= 2; i++) { |
| /* Check for yucca card presence */ |
| if (!yucca_pcie_card_present(i)) |
| continue; |
| |
| if (is_end_point(i)) { |
| yucca_setup_pcie_fpga_endpoint(i); |
| ret = ppc4xx_init_pcie_endport(i); |
| } else { |
| yucca_setup_pcie_fpga_rootpoint(i); |
| ret = ppc4xx_init_pcie_rootport(i); |
| } |
| if (ret) { |
| printf("PCIE%d: initialization as %s failed\n", i, |
| is_end_point(i) ? "endpoint" : "root-complex"); |
| continue; |
| } |
| |
| hose = &pcie_hose[i]; |
| hose->first_busno = bus; |
| hose->last_busno = bus; |
| hose->current_busno = bus; |
| |
| /* setup mem resource */ |
| pci_set_region(hose->regions + 0, |
| CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, |
| CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, |
| CFG_PCIE_MEMSIZE, |
| PCI_REGION_MEM); |
| hose->region_count = 1; |
| pci_register_hose(hose); |
| |
| if (is_end_point(i)) { |
| ppc4xx_setup_pcie_endpoint(hose, i); |
| /* |
| * Reson for no scanning is endpoint can not generate |
| * upstream configuration accesses. |
| */ |
| } else { |
| ppc4xx_setup_pcie_rootpoint(hose, i); |
| env = getenv("pciscandelay"); |
| if (env != NULL) { |
| delay = simple_strtoul(env, NULL, 10); |
| if (delay > 5) |
| printf("Warning, expect noticable delay before " |
| "PCIe scan due to 'pciscandelay' value!\n"); |
| mdelay(delay * 1000); |
| } |
| |
| /* |
| * Config access can only go down stream |
| */ |
| hose->last_busno = pci_hose_scan(hose); |
| bus = hose->last_busno + 1; |
| } |
| } |
| } |
| #endif /* defined(CONFIG_PCI) */ |
| |
| int misc_init_f (void) |
| { |
| uint reg; |
| #if defined(CONFIG_STRESS) |
| uint i ; |
| uint disp; |
| #endif |
| |
| out16(FPGA_REG10, (in16(FPGA_REG10) & |
| ~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) | |
| FPGA_REG10_10MHZ_ENABLE | |
| FPGA_REG10_100MHZ_ENABLE | |
| FPGA_REG10_GIGABIT_ENABLE | |
| FPGA_REG10_FULL_DUPLEX ); |
| |
| udelay(10000); /* wait 10ms */ |
| |
| out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH)); |
| |
| /* minimal init for PCIe */ |
| /* pci express 0 Endpoint Mode */ |
| mfsdr(SDR0_PE0DLPSET, reg); |
| reg &= (~0x00400000); |
| mtsdr(SDR0_PE0DLPSET, reg); |
| /* pci express 1 Rootpoint Mode */ |
| mfsdr(SDR0_PE1DLPSET, reg); |
| reg |= 0x00400000; |
| mtsdr(SDR0_PE1DLPSET, reg); |
| /* pci express 2 Rootpoint Mode */ |
| mfsdr(SDR0_PE2DLPSET, reg); |
| reg |= 0x00400000; |
| mtsdr(SDR0_PE2DLPSET, reg); |
| |
| out16(FPGA_REG1C,(in16 (FPGA_REG1C) & |
| ~FPGA_REG1C_PE0_ROOTPOINT & |
| ~FPGA_REG1C_PE1_ENDPOINT & |
| ~FPGA_REG1C_PE2_ENDPOINT)); |
| |
| #if defined(CONFIG_STRESS) |
| /* |
| * all this setting done by linux only needed by stress an charac. test |
| * procedure |
| * PCIe 1 Rootpoint PCIe2 Endpoint |
| * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver |
| * Power Level |
| */ |
| for (i = 0, disp = 0; i < 8; i++, disp += 3) { |
| mfsdr(SDR0_PE0HSSSET1L0 + disp, reg); |
| reg |= 0x33000000; |
| mtsdr(SDR0_PE0HSSSET1L0 + disp, reg); |
| } |
| |
| /* |
| * PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver |
| * Power Level |
| */ |
| for (i = 0, disp = 0; i < 4; i++, disp += 3) { |
| mfsdr(SDR0_PE1HSSSET1L0 + disp, reg); |
| reg |= 0x33000000; |
| mtsdr(SDR0_PE1HSSSET1L0 + disp, reg); |
| } |
| |
| /* |
| * PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver |
| * Power Level |
| */ |
| for (i = 0, disp = 0; i < 4; i++, disp += 3) { |
| mfsdr(SDR0_PE2HSSSET1L0 + disp, reg); |
| reg |= 0x33000000; |
| mtsdr(SDR0_PE2HSSSET1L0 + disp, reg); |
| } |
| |
| reg = 0x21242222; |
| mtsdr(SDR0_PE2UTLSET1, reg); |
| reg = 0x11000000; |
| mtsdr(SDR0_PE2UTLSET2, reg); |
| /* pci express 1 Endpoint Mode */ |
| reg = 0x00004000; |
| mtsdr(SDR0_PE2DLPSET, reg); |
| |
| mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */ |
| #endif |
| return 0; |
| } |
| |
| void fpga_init(void) |
| { |
| /* |
| * by default sdram access is disabled by fpga |
| */ |
| out16(FPGA_REG10, (in16 (FPGA_REG10) | |
| FPGA_REG10_SDRAM_ENABLE | |
| FPGA_REG10_ENABLE_DISPLAY )); |
| |
| return; |
| } |
| |
| #ifdef CONFIG_POST |
| /* |
| * Returns 1 if keys pressed to start the power-on long-running tests |
| * Called from board_init_f(). |
| */ |
| int post_hotkeys_pressed(void) |
| { |
| return (ctrlc()); |
| } |
| #endif |
| |
| /*---------------------------------------------------------------------------+ |
| | onboard_pci_arbiter_selected => from EPLD |
| +---------------------------------------------------------------------------*/ |
| int onboard_pci_arbiter_selected(int core_pci) |
| { |
| #if 0 |
| unsigned long onboard_pci_arbiter_sel; |
| |
| onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK; |
| |
| if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL) |
| return (BOARD_OPTION_SELECTED); |
| else |
| #endif |
| return (BOARD_OPTION_NOT_SELECTED); |
| } |