include/configs/actux2.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2007
  * Michael Schwingen, michael@schwingen.org
  *
  * Configuration settings for the AcTux-2 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #define CONFIG_IXP425			1
 #define CONFIG_ACTUX2			1

 #define	CONFIG_MACH_TYPE		1480

 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1

 #define CONFIG_IXP_SERIAL
 #define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTDELAY		5
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOARD_EARLY_INIT_F	1
 #define CONFIG_SYS_LDSCRIPT	"board/actux2/u-boot.lds"

 /***************************************************************
  * U-boot generic defines start here.
  ***************************************************************/
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 /* Command line configuration. */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ELF
 #undef CONFIG_CMD_PCI
 #undef CONFIG_PCI

 #define CONFIG_BOOTCOMMAND		"run boot_flash"
 /* enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1

 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
 /* which serial port to use */
 # define CONFIG_KGDB_SER_INDEX		1
 #endif

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT			"=> "
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE			256
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
 #define CONFIG_SYS_MAXARGS			16
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_MEMTEST_START		0x00400000
 #define CONFIG_SYS_MEMTEST_END			0x00800000

 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
 #define CONFIG_SYS_HZ				1000

 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000

 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1

 /* Expansion bus settings */
 #define CONFIG_SYS_EXP_CS0			0xbd113042

 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x00000000
 #define CONFIG_SYS_SDRAM_BASE			0x00000000

 /* 16MB SDRAM */
 #define CONFIG_SYS_SDR_CONFIG			0x3A
 #define PHYS_SDRAM_1_SIZE		0x01000000
 #define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
 #define CONFIG_SYS_SDR_MODE_CONFIG		0x1
 #define CONFIG_SYS_DRAM_SIZE			0x01000000

 /* FLASH organization */
 #define CONFIG_SYS_TEXT_BASE		0x50000000
 #define CONFIG_SYS_MAX_FLASH_BANKS		1
 /* max number of sectors on one chip */
 #define CONFIG_SYS_MAX_FLASH_SECT		140
 #define PHYS_FLASH_1			0x50000000
 #define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }

 #define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_LEN			(256 << 10)
 #define CONFIG_BOARD_SIZE_LIMIT			262144

 /* Use common CFI driver */
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* no byte writes on IXP4xx */
 #define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT

 /* print 'E' for empty sector on flinfo */
 #define CONFIG_SYS_FLASH_EMPTY_INFO

 /* Ethernet */

 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE		1
 /* NPE0 PHY address */
 #define	CONFIG_PHY_ADDR			0x00
 /* MII PHY management */
 #define CONFIG_MII			1
 /* fixed-speed switch without standard PHY registers on MII */
 #define CONFIG_MII_NPE0_FIXEDLINK       1
 #define CONFIG_MII_NPE0_SPEED           100
 #define CONFIG_MII_NPE0_FULLDUPLEX      1

 /* Number of ethernet rx buffers & descriptors */
 #define CONFIG_SYS_RX_ETH_BUFFER		16
 #define CONFIG_RESET_PHY_R		1
 /* ethernet switch connected to MII port */
 #define CONFIG_MII_ETHSWITCH		1

 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #undef  CONFIG_CMD_NFS

 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE		32

 /*
  * environment organization:
  * one flash sector, embedded in uboot area (bottom bootblock flash)
  */
 #define	CONFIG_ENV_IS_IN_FLASH		1
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
 #define CONFIG_SYS_USE_PPCENV			1

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"npe_ucode=50040000\0"						\
 	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
 	"kerneladdr=50050000\0"						\
 	"kernelfile=actux2/uImage\0"					\
 	"rootfile=actux2/rootfs\0"					\
 	"rootaddr=50170000\0"						\
 	"loadaddr=10000\0"						\
 	"updateboot_ser=mw.b 10000 ff 40000;"				\
 	" loady ${loadaddr};"						\
 	" run eraseboot writeboot\0"					\
 	"updateboot_net=mw.b 10000 ff 40000;"				\
 	" tftp ${loadaddr} actux2/u-boot.bin;"				\
 	" run eraseboot writeboot\0"					\
 	"eraseboot=protect off 50000000 50003fff;"			\
 	" protect off 50006000 5003ffff;"				\
 	" erase 50000000 50003fff;"					\
 	" erase 50006000 5003ffff\0"					\
 	"writeboot=cp.b 10000 50000000 4000;"				\
 	" cp.b 16000 50006000 3a000\0"					\
 	"updateucode=loady;"						\
 	" era ${npe_ucode} +${filesize};"				\
 	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
 	"updateroot=tftp ${loadaddr} ${rootfile};"			\
 	" era ${rootaddr} +${filesize};"				\
 	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
 	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
 	" era ${kerneladdr} +${filesize};"				\
 	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
 	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
 	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
 	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
 	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
 	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
 	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
 	"boot_flash=run flashargs addtty addeth;"			\
 	" bootm ${kerneladdr}\0"					\
 	"boot_net=run netargs addtty addeth;"				\
 	" tftpboot ${loadaddr} ${kernelfile};"				\
 	" bootm\0"

 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_INIT_SP_ADDR						\
 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2007
	* Michael Schwingen, michael@schwingen.org
	*
	* Configuration settings for the AcTux-2 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#define CONFIG_IXP425 1
	#define CONFIG_ACTUX2 1

	#define CONFIG_MACH_TYPE 1480

	#define CONFIG_DISPLAY_CPUINFO 1
	#define CONFIG_DISPLAY_BOARDINFO 1

	#define CONFIG_IXP_SERIAL
	#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_BOOTDELAY 5
	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	#define CONFIG_BOARD_EARLY_INIT_F 1
	#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds"

	/***************************************************************
	* U-boot generic defines start here.
	***************************************************************/
	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	/* Command line configuration. */
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ELF
	#undef CONFIG_CMD_PCI
	#undef CONFIG_PCI

	#define CONFIG_BOOTCOMMAND "run boot_flash"
	/* enable passing of ATAGs */
	#define CONFIG_CMDLINE_TAG 1
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1
	#define CONFIG_REVISION_TAG 1

	#if defined(CONFIG_CMD_KGDB)
	# define CONFIG_KGDB_BAUDRATE 230400
	/* which serial port to use */
	# define CONFIG_KGDB_SER_INDEX 1
	#endif

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_SYS_PROMPT "=> "
	/* Console I/O Buffer Size */
	#define CONFIG_SYS_CBSIZE 256
	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	/* max number of command args */
	#define CONFIG_SYS_MAXARGS 16
	/* Boot Argument Buffer Size */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_MEMTEST_START 0x00400000
	#define CONFIG_SYS_MEMTEST_END 0x00800000

	/* timer clock - 2* OSC_IN system clock */
	#define CONFIG_IXP425_TIMER_CLK 66666666
	#define CONFIG_SYS_HZ 1000

	/* default load address */
	#define CONFIG_SYS_LOAD_ADDR 0x00010000

	/* valid baudrates */
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
	115200, 230400 }
	#define CONFIG_SERIAL_RTS_ACTIVE 1

	/* Expansion bus settings */
	#define CONFIG_SYS_EXP_CS0 0xbd113042

	/* SDRAM settings */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 0x00000000
	#define CONFIG_SYS_SDRAM_BASE 0x00000000

	/* 16MB SDRAM */
	#define CONFIG_SYS_SDR_CONFIG 0x3A
	#define PHYS_SDRAM_1_SIZE 0x01000000
	#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
	#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
	#define CONFIG_SYS_DRAM_SIZE 0x01000000

	/* FLASH organization */
	#define CONFIG_SYS_TEXT_BASE 0x50000000
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	/* max number of sectors on one chip */
	#define CONFIG_SYS_MAX_FLASH_SECT 140
	#define PHYS_FLASH_1 0x50000000
	#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }

	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	#define CONFIG_BOARD_SIZE_LIMIT 262144

	/* Use common CFI driver */
	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	/* no byte writes on IXP4xx */
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT

	/* print 'E' for empty sector on flinfo */
	#define CONFIG_SYS_FLASH_EMPTY_INFO

	/* Ethernet */

	/* include IXP4xx NPE support */
	#define CONFIG_IXP4XX_NPE 1
	/* NPE0 PHY address */
	#define CONFIG_PHY_ADDR 0x00
	/* MII PHY management */
	#define CONFIG_MII 1
	/* fixed-speed switch without standard PHY registers on MII */
	#define CONFIG_MII_NPE0_FIXEDLINK 1
	#define CONFIG_MII_NPE0_SPEED 100
	#define CONFIG_MII_NPE0_FULLDUPLEX 1

	/* Number of ethernet rx buffers & descriptors */
	#define CONFIG_SYS_RX_ETH_BUFFER 16
	#define CONFIG_RESET_PHY_R 1
	/* ethernet switch connected to MII port */
	#define CONFIG_MII_ETHSWITCH 1

	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_PING
	#undef CONFIG_CMD_NFS

	/* BOOTP options */
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/* Cache Configuration */
	#define CONFIG_SYS_CACHELINE_SIZE 32

	/*
	* environment organization:
	* one flash sector, embedded in uboot area (bottom bootblock flash)
	*/
	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_SIZE 0x2000
	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
	#define CONFIG_SYS_USE_PPCENV 1

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"npe_ucode=50040000\0" \
	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
	"kerneladdr=50050000\0" \
	"kernelfile=actux2/uImage\0" \
	"rootfile=actux2/rootfs\0" \
	"rootaddr=50170000\0" \
	"loadaddr=10000\0" \
	"updateboot_ser=mw.b 10000 ff 40000;" \
	" loady ${loadaddr};" \
	" run eraseboot writeboot\0" \
	"updateboot_net=mw.b 10000 ff 40000;" \
	" tftp ${loadaddr} actux2/u-boot.bin;" \
	" run eraseboot writeboot\0" \
	"eraseboot=protect off 50000000 50003fff;" \
	" protect off 50006000 5003ffff;" \
	" erase 50000000 50003fff;" \
	" erase 50006000 5003ffff\0" \
	"writeboot=cp.b 10000 50000000 4000;" \
	" cp.b 16000 50006000 3a000\0" \
	"updateucode=loady;" \
	" era ${npe_ucode} +${filesize};" \
	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
	"updateroot=tftp ${loadaddr} ${rootfile};" \
	" era ${rootaddr} +${filesize};" \
	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
	"updatekern=tftp ${loadaddr} ${kernelfile};" \
	" era ${kerneladdr} +${filesize};" \
	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
	" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
	" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
	"boot_flash=run flashargs addtty addeth;" \
	" bootm ${kerneladdr}\0" \
	"boot_net=run netargs addtty addeth;" \
	" tftpboot ${loadaddr} ${kernelfile};" \
	" bootm\0"

	/* additions for new relocation code, must be added to all boards */
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

	#endif /* __CONFIG_H */