| /* |
| * (C) Copyright 2003-2006 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004-2006 |
| * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ |
| #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ |
| #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ |
| #define CONFIG_TB5200 1 /* ... on a TB5200 base board */ |
| |
| /* |
| * Valid values for CONFIG_SYS_TEXT_BASE are: |
| * 0xFC000000 boot low (standard configuration with room for |
| * max 64 MByte Flash ROM) |
| * 0xFFF00000 boot high (for a backup copy of U-Boot) |
| * 0x00100000 boot from RAM (for testing only) |
| */ |
| #ifndef CONFIG_SYS_TEXT_BASE |
| #define CONFIG_SYS_TEXT_BASE 0xFC000000 |
| #endif |
| |
| #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ |
| |
| #define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
| |
| /* |
| * Serial console configuration |
| */ |
| #define CONFIG_PSC_CONSOLE 1 /* default console is on PSC1 */ |
| #define CONFIG_PSC_CONSOLE2 6 /* second console is on PSC6 */ |
| #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| /* |
| * Video console |
| */ |
| #if 1 |
| #define CONFIG_VIDEO |
| #define CONFIG_VIDEO_SM501 |
| #define CONFIG_VIDEO_SM501_32BPP |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_VGA_AS_SINGLE_DEVICE |
| #define CONFIG_CONSOLE_EXTRA_INFO |
| #define CONFIG_VIDEO_SW_CURSOR |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| #endif |
| |
| /* Partitions */ |
| #define CONFIG_MAC_PARTITION |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_ISO_PARTITION |
| |
| /* USB */ |
| #define CONFIG_USB_OHCI |
| #define CONFIG_USB_STORAGE |
| |
| /* POST support */ |
| #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ |
| CONFIG_SYS_POST_CPU | \ |
| CONFIG_SYS_POST_I2C) |
| |
| #ifdef CONFIG_POST |
| /* preserve space for the post_word at end of on-chip SRAM */ |
| #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 |
| #endif |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_ECHO |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NFS |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_REGINFO |
| #define CONFIG_CMD_SNTP |
| #define CONFIG_CMD_BSP |
| #define CONFIG_CMD_USB |
| |
| #ifdef CONFIG_VIDEO |
| #define CONFIG_CMD_BMP |
| #endif |
| |
| #ifdef CONFIG_POST |
| #define CONFIG_CMD_DIAG |
| #endif |
| |
| |
| #define CONFIG_TIMESTAMP /* display image timestamps */ |
| |
| #if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */ |
| # define CONFIG_SYS_LOWBOOT 1 |
| #endif |
| |
| /* |
| * Autobooting |
| */ |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
| |
| #define CONFIG_PREBOOT "echo;" \ |
| "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ |
| "echo" |
| |
| #undef CONFIG_BOOTARGS |
| |
| #if defined(CONFIG_TQM5200_B) |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "rootpath=/opt/eldk/ppc_6xx\0" \ |
| "ramargs=setenv bootargs root=/dev/ram rw\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath}\0" \ |
| "addip=setenv bootargs ${bootargs} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ |
| ":${hostname}:${netdev}:off panic=1\0" \ |
| "flash_self=run ramargs addip;" \ |
| "bootm ${kernel_addr} ${ramdisk_addr}\0" \ |
| "flash_nfs=run nfsargs addip;" \ |
| "bootm ${kernel_addr}\0" \ |
| "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ |
| "bootfile=/tftpboot/tqm5200/uImage\0" \ |
| "load=tftp 200000 ${u-boot}\0" \ |
| "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ |
| "update=protect off FC000000 FC07FFFF;" \ |
| "erase FC000000 FC07FFFF;" \ |
| "cp.b 200000 FC000000 ${filesize};" \ |
| "protect on FC000000 FC07FFFF\0" \ |
| "" |
| #else |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "rootpath=/opt/eldk/ppc_6xx\0" \ |
| "ramargs=setenv bootargs root=/dev/ram rw\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath}\0" \ |
| "addip=setenv bootargs ${bootargs} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ |
| ":${hostname}:${netdev}:off panic=1\0" \ |
| "flash_self=run ramargs addip;" \ |
| "bootm ${kernel_addr} ${ramdisk_addr}\0" \ |
| "flash_nfs=run nfsargs addip;" \ |
| "bootm ${kernel_addr}\0" \ |
| "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ |
| "bootfile=/tftpboot/tqm5200/uImage\0" \ |
| "load=tftp 200000 $(u-boot)\0" \ |
| "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ |
| "update=protect off FC000000 FC05FFFF;" \ |
| "erase FC000000 FC05FFFF;" \ |
| "cp.b 200000 FC000000 ${filesize};" \ |
| "protect on FC000000 FC05FFFF\0" \ |
| "" |
| #endif /* CONFIG_TQM5200_B */ |
| |
| #define CONFIG_BOOTCOMMAND "run net_nfs" |
| |
| /* |
| * IPB Bus clocking configuration. |
| */ |
| #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ |
| |
| #if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) |
| /* |
| * PCI Bus clocking configuration |
| * |
| * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if |
| * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock |
| * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. |
| */ |
| #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ |
| #endif |
| |
| /* |
| * I2C configuration |
| */ |
| #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ |
| #define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 */ |
| |
| /* |
| * I2C clock frequency |
| * |
| * Please notice, that the resulting clock frequency could differ from the |
| * configured value. This is because the I2C clock is derived from system |
| * clock over a frequency divider with only a few divider values. U-boot |
| * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated |
| * approximation allways lies below the configured value, never above. |
| */ |
| #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ |
| #define CONFIG_SYS_I2C_SLAVE 0x7F |
| |
| /* |
| * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work |
| * also). For other EEPROMs configuration should be verified. On Mini-FAP the |
| * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the |
| * same configuration could be used. |
| */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 |
| |
| /* List of I2C addresses to be verified by POST */ |
| #undef CONFIG_SYS_POST_I2C_ADDRS |
| #define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ |
| CONFIG_SYS_I2C_RTC_ADDR, \ |
| CONFIG_SYS_I2C_SLAVE} |
| |
| /* |
| * Flash configuration |
| */ |
| #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */ |
| |
| /* use CFI flash driver */ |
| #define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ |
| #define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 |
| |
| #if !defined(CONFIG_SYS_LOWBOOT) |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000) |
| #else /* CONFIG_SYS_LOWBOOT */ |
| #if defined(CONFIG_TQM5200_B) |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00080000) |
| #else |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) |
| #endif /* CONFIG_TQM5200_B */ |
| #endif /* CONFIG_SYS_LOWBOOT */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks |
| (= chip selects) */ |
| |
| /* Dynamic MTD partition support */ |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ |
| #define CONFIG_FLASH_CFI_MTD |
| #define MTDIDS_DEFAULT "nor0=TQM5200-0" |
| #if defined(CONFIG_TQM5200_B) |
| #define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ |
| "1280k(kernel)," \ |
| "2m(initrd)," \ |
| "4m(small-fs)," \ |
| "16m(big-fs)," \ |
| "8m(misc)" |
| #else |
| #define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ |
| "1408k(kernel)," \ |
| "2m(initrd)," \ |
| "4m(small-fs)," \ |
| "16m(big-fs)," \ |
| "8m(misc)" |
| #endif /* CONFIG_TQM5200_B */ |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_SIZE 0x10000 |
| #if defined(CONFIG_TQM5200_B) |
| #define CONFIG_ENV_SECT_SIZE 0x40000 |
| #else |
| #define CONFIG_ENV_SECT_SIZE 0x20000 |
| #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
| #endif /* CONFIG_TQM5200_B */ |
| |
| /* |
| * Memory map |
| */ |
| #define CONFIG_SYS_MBAR 0xF0000000 |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 |
| |
| /* Use ON-Chip SRAM until RAM will be available */ |
| #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM |
| #ifdef CONFIG_POST |
| /* preserve space for the post_word at end of on-chip SRAM */ |
| #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE |
| #else |
| #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE |
| #endif |
| |
| |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) |
| # define CONFIG_SYS_RAMBOOT 1 |
| #endif |
| |
| #if defined(CONFIG_TQM5200_B) |
| #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ |
| #else |
| #define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ |
| #endif /* CONFIG_TQM5200_B */ |
| #define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| |
| /* |
| * Ethernet configuration |
| */ |
| #define CONFIG_MPC5xxx_FEC 1 |
| #define CONFIG_MPC5xxx_FEC_MII100 |
| /* |
| * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb |
| */ |
| /* #define CONFIG_MPC5xxx_FEC_MII10 */ |
| #define CONFIG_PHY_ADDR 0x00 |
| |
| /* |
| * GPIO configuration |
| * |
| * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): |
| * Bit 0 (mask: 0x80000000): 1 |
| * use ALT CAN position: Bits 2-3 (mask: 0x30000000): |
| * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. |
| * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. |
| * Use for REV200 STK52XX boards. Do not use with REV100 modules |
| * (because, there I2C1 is used as I2C bus) |
| * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 |
| * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) |
| * 000 -> All PSC2 pins are GIOPs |
| * 001 -> CAN1/2 on PSC2 pins |
| * Use for REV100 STK52xx boards |
| * use PSC3: Bits 20:23 (mask: 0x00000300): |
| * 0001 -> USB2 |
| * 0000 -> GPIO |
| * use PSC6: |
| * on STK52xx: |
| * use as UART. Pins PSC6_0 to PSC6_3 are used. |
| * Bits 9:11 (mask: 0x00700000): |
| * 101 -> PSC6 : Extended POST test is not available |
| * on MINI-FAP and TQM5200_IB: |
| * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): |
| * 000 -> PSC6 could not be used as UART, CODEC or IrDA |
| * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST |
| * tests. |
| */ |
| #define CONFIG_SYS_GPS_PORT_CONFIG 0x81500114 |
| |
| /* |
| * RTC configuration |
| */ |
| #define CONFIG_RTC_M41T11 1 |
| #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| #define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* because Linux uses the same base |
| year */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ |
| #if defined(CONFIG_CMD_KGDB) |
| # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| /* Enable an alternate, more extensive memory test */ |
| #define CONFIG_SYS_ALT_MEMTEST |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
| |
| #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| |
| /* |
| * Enable loopw command. |
| */ |
| #define CONFIG_LOOPW |
| |
| /* |
| * Various low-level settings |
| */ |
| #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI |
| #define CONFIG_SYS_HID0_FINAL HID0_ICE |
| |
| #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE |
| #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 |
| #define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ |
| #else |
| #define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ |
| #endif |
| #define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE |
| |
| #define CONFIG_LAST_STAGE_INIT |
| |
| /* |
| * SRAM - Do not map below 2 GB in address space, because this area is used |
| * for SDRAM autosizing. |
| */ |
| #define CONFIG_SYS_CS2_START 0xE5000000 |
| #define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */ |
| #define CONFIG_SYS_CS2_CFG 0x0004D930 |
| |
| /* |
| * Grafic controller - Do not map below 2 GB in address space, because this |
| * area is used for SDRAM autosizing. |
| */ |
| #define SM501_FB_BASE 0xE0000000 |
| #define CONFIG_SYS_CS1_START (SM501_FB_BASE) |
| #define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */ |
| #define CONFIG_SYS_CS1_CFG 0x8F48FF70 |
| #define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000 |
| |
| #define CONFIG_SYS_CS_BURST 0x00000000 |
| #define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ |
| |
| #define CONFIG_SYS_RESET_ADDRESS 0xff000000 |
| |
| /*----------------------------------------------------------------------- |
| * USB stuff |
| *----------------------------------------------------------------------- |
| */ |
| #define CONFIG_USB_CLOCK 0x0001BBBB |
| #define CONFIG_USB_CONFIG 0x00001000 |
| |
| /*----------------------------------------------------------------------- |
| * IDE/ATA stuff Supports IDE harddisk |
| *----------------------------------------------------------------------- |
| */ |
| |
| #undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ |
| |
| #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ |
| #undef CONFIG_IDE_LED /* LED for ide not supported */ |
| |
| #define CONFIG_IDE_RESET /* reset for ide supported */ |
| #define CONFIG_IDE_PREINIT |
| |
| #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
| #define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ |
| |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
| |
| #define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA |
| |
| /* Offset for data I/O */ |
| #define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) |
| |
| /* Offset for normal register accesses */ |
| #define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) |
| |
| /* Offset for alternate registers */ |
| #define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) |
| |
| /* Interval between registers */ |
| #define CONFIG_SYS_ATA_STRIDE 4 |
| |
| #endif /* __CONFIG_H */ |