| /* |
| * Copyright (C) 2013 Samsung Electronics |
| * Przemyslaw Marczak <p.marczak@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <lcd.h> |
| #include <libtizen.h> |
| #include <samsung/misc.h> |
| #include <errno.h> |
| #include <version.h> |
| #include <malloc.h> |
| #include <linux/sizes.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/gpio.h> |
| #include <linux/input.h> |
| #include <dm.h> |
| #include <power/pmic.h> |
| #include <mmc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_SET_DFU_ALT_INFO |
| void set_dfu_alt_info(char *interface, char *devstr) |
| { |
| size_t buf_size = CONFIG_SET_DFU_ALT_BUF_LEN; |
| ALLOC_CACHE_ALIGN_BUFFER(char, buf, buf_size); |
| char *alt_info = "Settings not found!"; |
| char *status = "error!\n"; |
| char *alt_setting; |
| char *alt_sep; |
| int offset = 0; |
| |
| puts("DFU alt info setting: "); |
| |
| alt_setting = get_dfu_alt_boot(interface, devstr); |
| if (alt_setting) { |
| setenv("dfu_alt_boot", alt_setting); |
| offset = snprintf(buf, buf_size, "%s", alt_setting); |
| } |
| |
| alt_setting = get_dfu_alt_system(interface, devstr); |
| if (alt_setting) { |
| if (offset) |
| alt_sep = ";"; |
| else |
| alt_sep = ""; |
| |
| offset += snprintf(buf + offset, buf_size - offset, |
| "%s%s", alt_sep, alt_setting); |
| } |
| |
| if (offset) { |
| alt_info = buf; |
| status = "done\n"; |
| } |
| |
| setenv("dfu_alt_info", alt_info); |
| puts(status); |
| } |
| #endif |
| |
| #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
| void set_board_info(void) |
| { |
| char info[64]; |
| |
| snprintf(info, ARRAY_SIZE(info), "%u.%u", (s5p_cpu_rev & 0xf0) >> 4, |
| s5p_cpu_rev & 0xf); |
| setenv("soc_rev", info); |
| |
| snprintf(info, ARRAY_SIZE(info), "%x", s5p_cpu_id); |
| setenv("soc_id", info); |
| |
| #ifdef CONFIG_REVISION_TAG |
| snprintf(info, ARRAY_SIZE(info), "%x", get_board_rev()); |
| setenv("board_rev", info); |
| #endif |
| #ifdef CONFIG_OF_LIBFDT |
| const char *bdtype = ""; |
| const char *bdname = CONFIG_SYS_BOARD; |
| |
| #ifdef CONFIG_BOARD_TYPES |
| bdtype = get_board_type(); |
| sprintf(info, "%s%s", bdname, bdtype); |
| setenv("boardname", info); |
| #endif |
| snprintf(info, ARRAY_SIZE(info), "%s%x-%s%s.dtb", |
| CONFIG_SYS_SOC, s5p_cpu_id, bdname, bdtype); |
| setenv("fdtfile", info); |
| #endif |
| } |
| #endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */ |
| |
| #ifdef CONFIG_LCD_MENU |
| static int power_key_pressed(u32 reg) |
| { |
| struct pmic *pmic; |
| u32 status; |
| u32 mask; |
| |
| pmic = pmic_get(KEY_PWR_PMIC_NAME); |
| if (!pmic) { |
| printf("%s: Not found\n", KEY_PWR_PMIC_NAME); |
| return 0; |
| } |
| |
| if (pmic_probe(pmic)) |
| return 0; |
| |
| if (reg == KEY_PWR_STATUS_REG) |
| mask = KEY_PWR_STATUS_MASK; |
| else |
| mask = KEY_PWR_INTERRUPT_MASK; |
| |
| if (pmic_reg_read(pmic, reg, &status)) |
| return 0; |
| |
| return !!(status & mask); |
| } |
| |
| static int key_pressed(int key) |
| { |
| int value; |
| |
| switch (key) { |
| case KEY_POWER: |
| value = power_key_pressed(KEY_PWR_INTERRUPT_REG); |
| break; |
| case KEY_VOLUMEUP: |
| value = !gpio_get_value(KEY_VOL_UP_GPIO); |
| break; |
| case KEY_VOLUMEDOWN: |
| value = !gpio_get_value(KEY_VOL_DOWN_GPIO); |
| break; |
| default: |
| value = 0; |
| break; |
| } |
| |
| return value; |
| } |
| |
| static int check_keys(void) |
| { |
| int keys = 0; |
| |
| if (key_pressed(KEY_POWER)) |
| keys += KEY_POWER; |
| if (key_pressed(KEY_VOLUMEUP)) |
| keys += KEY_VOLUMEUP; |
| if (key_pressed(KEY_VOLUMEDOWN)) |
| keys += KEY_VOLUMEDOWN; |
| |
| return keys; |
| } |
| |
| /* |
| * 0 BOOT_MODE_INFO |
| * 1 BOOT_MODE_THOR |
| * 2 BOOT_MODE_UMS |
| * 3 BOOT_MODE_DFU |
| * 4 BOOT_MODE_EXIT |
| */ |
| static char * |
| mode_name[BOOT_MODE_EXIT + 1][2] = { |
| {"DEVICE", ""}, |
| {"THOR", "thor"}, |
| {"UMS", "ums"}, |
| {"DFU", "dfu"}, |
| {"GPT", "gpt"}, |
| {"ENV", "env"}, |
| {"EXIT", ""}, |
| }; |
| |
| static char * |
| mode_info[BOOT_MODE_EXIT + 1] = { |
| "info", |
| "downloader", |
| "mass storage", |
| "firmware update", |
| "restore", |
| "default", |
| "and run normal boot" |
| }; |
| |
| static char * |
| mode_cmd[BOOT_MODE_EXIT + 1] = { |
| "", |
| "thor 0 mmc 0", |
| "ums 0 mmc 0", |
| "dfu 0 mmc 0", |
| "gpt write mmc 0 $partitions", |
| "env default -a; saveenv", |
| "", |
| }; |
| |
| static void display_board_info(void) |
| { |
| #ifdef CONFIG_GENERIC_MMC |
| struct mmc *mmc = find_mmc_device(0); |
| #endif |
| vidinfo_t *vid = &panel_info; |
| |
| lcd_position_cursor(4, 4); |
| |
| lcd_printf("%s\n\t", U_BOOT_VERSION); |
| lcd_puts("\n\t\tBoard Info:\n"); |
| #ifdef CONFIG_SYS_BOARD |
| lcd_printf("\tBoard name: %s\n", CONFIG_SYS_BOARD); |
| #endif |
| #ifdef CONFIG_REVISION_TAG |
| lcd_printf("\tBoard rev: %u\n", get_board_rev()); |
| #endif |
| lcd_printf("\tDRAM banks: %u\n", CONFIG_NR_DRAM_BANKS); |
| lcd_printf("\tDRAM size: %u MB\n", gd->ram_size / SZ_1M); |
| |
| #ifdef CONFIG_GENERIC_MMC |
| if (mmc) { |
| if (!mmc->capacity) |
| mmc_init(mmc); |
| |
| lcd_printf("\teMMC size: %llu MB\n", mmc->capacity / SZ_1M); |
| } |
| #endif |
| if (vid) |
| lcd_printf("\tDisplay resolution: %u x % u\n", |
| vid->vl_col, vid->vl_row); |
| |
| lcd_printf("\tDisplay BPP: %u\n", 1 << vid->vl_bpix); |
| } |
| |
| static int mode_leave_menu(int mode) |
| { |
| char *exit_option; |
| char *exit_reset = "reset"; |
| char *exit_back = "back"; |
| cmd_tbl_t *cmd; |
| int cmd_result; |
| int leave; |
| |
| lcd_clear(); |
| |
| switch (mode) { |
| case BOOT_MODE_EXIT: |
| return 1; |
| case BOOT_MODE_INFO: |
| display_board_info(); |
| exit_option = exit_back; |
| leave = 0; |
| break; |
| default: |
| cmd = find_cmd(mode_name[mode][1]); |
| if (cmd) { |
| printf("Enter: %s %s\n", mode_name[mode][0], |
| mode_info[mode]); |
| lcd_printf("\n\n\t%s %s\n", mode_name[mode][0], |
| mode_info[mode]); |
| lcd_puts("\n\tDo not turn off device before finish!\n"); |
| |
| cmd_result = run_command(mode_cmd[mode], 0); |
| |
| if (cmd_result == CMD_RET_SUCCESS) { |
| printf("Command finished\n"); |
| lcd_clear(); |
| lcd_printf("\n\n\t%s finished\n", |
| mode_name[mode][0]); |
| |
| exit_option = exit_reset; |
| leave = 1; |
| } else { |
| printf("Command error\n"); |
| lcd_clear(); |
| lcd_printf("\n\n\t%s command error\n", |
| mode_name[mode][0]); |
| |
| exit_option = exit_back; |
| leave = 0; |
| } |
| } else { |
| lcd_puts("\n\n\tThis mode is not supported.\n"); |
| exit_option = exit_back; |
| leave = 0; |
| } |
| } |
| |
| lcd_printf("\n\n\tPress POWER KEY to %s\n", exit_option); |
| |
| /* Clear PWR button Rising edge interrupt status flag */ |
| power_key_pressed(KEY_PWR_INTERRUPT_REG); |
| |
| /* Wait for PWR key */ |
| while (!key_pressed(KEY_POWER)) |
| mdelay(1); |
| |
| lcd_clear(); |
| return leave; |
| } |
| |
| static void display_download_menu(int mode) |
| { |
| char *selection[BOOT_MODE_EXIT + 1]; |
| int i; |
| |
| for (i = 0; i <= BOOT_MODE_EXIT; i++) |
| selection[i] = "[ ]"; |
| |
| selection[mode] = "[=>]"; |
| |
| lcd_clear(); |
| lcd_printf("\n\n\t\tDownload Mode Menu\n\n"); |
| |
| for (i = 0; i <= BOOT_MODE_EXIT; i++) |
| lcd_printf("\t%s %s - %s\n\n", selection[i], |
| mode_name[i][0], |
| mode_info[i]); |
| } |
| |
| static void download_menu(void) |
| { |
| int mode = 0; |
| int last_mode = 0; |
| int run; |
| int key = 0; |
| int timeout = 15; /* sec */ |
| int i; |
| |
| display_download_menu(mode); |
| |
| lcd_puts("\n"); |
| |
| /* Start count if no key is pressed */ |
| while (check_keys()) |
| continue; |
| |
| while (timeout--) { |
| lcd_printf("\r\tNormal boot will start in: %2.d seconds.", |
| timeout); |
| |
| /* about 1000 ms in for loop */ |
| for (i = 0; i < 10; i++) { |
| mdelay(100); |
| key = check_keys(); |
| if (key) |
| break; |
| } |
| if (key) |
| break; |
| } |
| |
| if (!key) { |
| lcd_clear(); |
| return; |
| } |
| |
| while (1) { |
| run = 0; |
| |
| if (mode != last_mode) |
| display_download_menu(mode); |
| |
| last_mode = mode; |
| mdelay(200); |
| |
| key = check_keys(); |
| switch (key) { |
| case KEY_POWER: |
| run = 1; |
| break; |
| case KEY_VOLUMEUP: |
| if (mode > 0) |
| mode--; |
| break; |
| case KEY_VOLUMEDOWN: |
| if (mode < BOOT_MODE_EXIT) |
| mode++; |
| break; |
| default: |
| break; |
| } |
| |
| if (run) { |
| if (mode_leave_menu(mode)) |
| run_command("reset", 0); |
| |
| display_download_menu(mode); |
| } |
| } |
| |
| lcd_clear(); |
| } |
| |
| void check_boot_mode(void) |
| { |
| int pwr_key; |
| |
| pwr_key = power_key_pressed(KEY_PWR_STATUS_REG); |
| if (!pwr_key) |
| return; |
| |
| /* Clear PWR button Rising edge interrupt status flag */ |
| power_key_pressed(KEY_PWR_INTERRUPT_REG); |
| |
| if (key_pressed(KEY_VOLUMEUP)) |
| download_menu(); |
| else if (key_pressed(KEY_VOLUMEDOWN)) |
| mode_leave_menu(BOOT_MODE_THOR); |
| } |
| |
| void keys_init(void) |
| { |
| /* Set direction to input */ |
| gpio_request(KEY_VOL_UP_GPIO, "volume-up"); |
| gpio_request(KEY_VOL_DOWN_GPIO, "volume-down"); |
| gpio_direction_input(KEY_VOL_UP_GPIO); |
| gpio_direction_input(KEY_VOL_DOWN_GPIO); |
| } |
| #endif /* CONFIG_LCD_MENU */ |
| |
| #ifdef CONFIG_CMD_BMP |
| void draw_logo(void) |
| { |
| int x, y; |
| ulong addr; |
| |
| addr = panel_info.logo_addr; |
| if (!addr) { |
| error("There is no logo data."); |
| return; |
| } |
| |
| if (panel_info.vl_width >= panel_info.logo_width) { |
| x = ((panel_info.vl_width - panel_info.logo_width) >> 1); |
| x += panel_info.logo_x_offset; /* For X center align */ |
| } else { |
| x = 0; |
| printf("Warning: image width is bigger than display width\n"); |
| } |
| |
| if (panel_info.vl_height >= panel_info.logo_height) { |
| y = ((panel_info.vl_height - panel_info.logo_height) >> 1); |
| y += panel_info.logo_y_offset; /* For Y center align */ |
| } else { |
| y = 0; |
| printf("Warning: image height is bigger than display height\n"); |
| } |
| |
| bmp_display(addr, x, y); |
| } |
| #endif /* CONFIG_CMD_BMP */ |