| /* |
| * Copyright 2010-2011 Calxeda, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <config_distro_defaults.h> |
| |
| #define CONFIG_SYS_DCACHE_OFF |
| #define CONFIG_SYS_THUMB_BUILD |
| |
| #define CONFIG_SYS_NO_FLASH |
| |
| #define CONFIG_OF_BOARD_SETUP |
| #define CONFIG_FIT |
| #define CONFIG_SYS_BOOTMAPSZ (16 << 20) |
| |
| #define CONFIG_SYS_TIMER_RATE (150000000/256) |
| #define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4) |
| #define CONFIG_SYS_TIMER_COUNTS_DOWN |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (512 * 1024) |
| |
| #define CONFIG_PL011_SERIAL |
| #define CONFIG_PL011_CLOCK 150000000 |
| #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } |
| #define CONFIG_CONS_INDEX 0 |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CONFIG_BOOTCOUNT_LIMIT |
| #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD |
| #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ |
| #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c |
| |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_LIBATA |
| #define CONFIG_SCSI_AHCI |
| #define CONFIG_SCSI_AHCI_PLAT |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| CONFIG_SYS_SCSI_MAX_LUN) |
| |
| #define CONFIG_CALXEDA_XGMAC |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_CMD_SCSI |
| |
| #define CONFIG_BOOT_RETRY_TIME -1 |
| #define CONFIG_RESET_TO_RETRY |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT)+16) |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x800000 |
| #define CONFIG_SYS_64BIT_LBA |
| |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| * The DRAM is already setup, so do not touch the DT node later. |
| */ |
| #define CONFIG_NR_DRAM_BANKS 0 |
| #define PHYS_SDRAM_1_SIZE (4089 << 20) |
| #define CONFIG_SYS_MEMTEST_START 0x100000 |
| #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) |
| |
| /* Environment data setup |
| */ |
| #define CONFIG_ENV_IS_IN_NVRAM |
| #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ |
| #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ |
| #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ |
| #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_TEXT_BASE 0x00008000 |
| #define CONFIG_SYS_INIT_SP_ADDR 0x01000000 |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| |
| #endif |