| /* |
| * (C) Copyright 2001 |
| * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. |
| * |
| * (C) Copyright 2002 |
| * Gregory E. Allen, gallen@arlut.utexas.edu |
| * Matthew E. Karger, karger@arlut.utexas.edu |
| * Applied Research Laboratories, The University of Texas at Austin |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc824x.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #define SAVE_SZ 32 |
| |
| |
| int checkboard(void) |
| { |
| ulong busfreq = get_bus_freq(0); |
| char buf[32]; |
| |
| printf("Board: UTX8245 Local Bus at %s MHz\n", strmhz(buf, busfreq)); |
| return 0; |
| } |
| |
| |
| long int initdram(int board_type) |
| { |
| #if 1 |
| int i, cnt; |
| volatile uchar *base = CFG_SDRAM_BASE; |
| volatile ulong *addr; |
| ulong save[SAVE_SZ]; |
| ulong val, ret = 0; |
| |
| for (i=0; i<SAVE_SZ; i++) {save[i] = 0;} /* clear table */ |
| |
| for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) |
| { |
| addr = (volatile ulong *)base + cnt; |
| save[i++] = *addr; |
| *addr = ~cnt; |
| } |
| |
| addr = (volatile ulong *)base; |
| save[i] = *addr; |
| *addr = 0; |
| |
| if (*addr != 0) |
| { |
| *addr = save[i]; |
| goto Done; |
| } |
| |
| for (cnt = 1; cnt < CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) |
| { |
| addr = (volatile ulong *)base + cnt; |
| val = *addr; |
| *addr = save[--i]; |
| if (val != ~cnt) |
| { |
| ulong new_bank0_end = cnt * sizeof(long) - 1; |
| ulong mear1 = mpc824x_mpc107_getreg(MEAR1); |
| ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); |
| mear1 = (mear1 & 0xFFFFFF00) | |
| ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); |
| emear1 = (emear1 & 0xFFFFFF00) | |
| ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); |
| mpc824x_mpc107_setreg(MEAR1, mear1); |
| mpc824x_mpc107_setreg(EMEAR1, emear1); |
| |
| ret = cnt * sizeof(long); |
| goto Done; |
| } |
| } |
| |
| ret = CFG_MAX_RAM_SIZE; |
| Done: |
| return ret; |
| #else |
| return (CFG_MAX_RAM_SIZE); |
| #endif |
| |
| } |
| |
| |
| /* |
| * Initialize PCI Devices, report devices found. |
| */ |
| |
| static struct pci_config_table pci_utx8245_config_table[] = { |
| #ifndef CONFIG_PCI_PNP |
| { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, |
| PCI_ENET0_MEMADDR, |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, |
| { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| pci_cfgfunc_config_device, { PCI_FIREWIRE_IOADDR, |
| PCI_FIREWIRE_MEMADDR, |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, |
| #endif /*CONFIG_PCI_PNP*/ |
| { } |
| }; |
| |
| |
| static void pci_utx8245_fixup_irq(struct pci_controller *hose, pci_dev_t dev) |
| { |
| if (PCI_DEV(dev) == 11) |
| /* assign serial interrupt line 9 (int25) to FireWire */ |
| pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 25); |
| |
| else if (PCI_DEV(dev) == 12) |
| /* assign serial interrupt line 8 (int24) to Ethernet */ |
| pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 24); |
| } |
| |
| static struct pci_controller utx8245_hose = { |
| #ifndef CONFIG_PCI_PNP |
| config_table: pci_utx8245_config_table, |
| fixup_irq: pci_utx8245_fixup_irq, |
| write_byte: pci_hose_write_config_byte |
| #endif /*CONFIG_PCI_PNP*/ |
| }; |
| |
| void pci_init_board (void) |
| { |
| pci_mpc824x_init(&utx8245_hose); |
| |
| icache_enable(); |
| } |
| |