| /* |
| * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> |
| * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _IMX_REGS_H |
| #define _IMX_REGS_H |
| |
| #ifndef __ASSEMBLY__ |
| |
| extern void imx_gpio_mode (int gpio_mode); |
| |
| #ifdef CONFIG_MXC_UART |
| extern void mx27_uart1_init_pins(void); |
| #endif /* CONFIG_MXC_UART */ |
| |
| #ifdef CONFIG_FEC_MXC |
| extern void mx27_fec_init_pins(void); |
| #endif /* CONFIG_FEC_MXC */ |
| |
| #ifdef CONFIG_MXC_MMC |
| extern void mx27_sd1_init_pins(void); |
| extern void mx27_sd2_init_pins(void); |
| #endif /* CONFIG_MXC_MMC */ |
| |
| /* AIPI */ |
| struct aipi_regs { |
| u32 psr0; |
| u32 psr1; |
| }; |
| |
| /* System Control */ |
| struct system_control_regs { |
| u32 res[5]; |
| u32 fmcr; |
| u32 gpcr; |
| u32 wbcr; |
| u32 dscr1; |
| u32 dscr2; |
| u32 dscr3; |
| u32 dscr4; |
| u32 dscr5; |
| u32 dscr6; |
| u32 dscr7; |
| u32 dscr8; |
| u32 dscr9; |
| u32 dscr10; |
| u32 dscr11; |
| u32 dscr12; |
| u32 dscr13; |
| u32 pscr; |
| u32 pmcr; |
| u32 res1; |
| u32 dcvr0; |
| u32 dcvr1; |
| u32 dcvr2; |
| u32 dcvr3; |
| }; |
| |
| /* Chip Select Registers */ |
| struct weim_regs { |
| u32 cs0u; /* Chip Select 0 Upper Register */ |
| u32 cs0l; /* Chip Select 0 Lower Register */ |
| u32 cs0a; /* Chip Select 0 Addition Register */ |
| u32 pad0; |
| u32 cs1u; /* Chip Select 1 Upper Register */ |
| u32 cs1l; /* Chip Select 1 Lower Register */ |
| u32 cs1a; /* Chip Select 1 Addition Register */ |
| u32 pad1; |
| u32 cs2u; /* Chip Select 2 Upper Register */ |
| u32 cs2l; /* Chip Select 2 Lower Register */ |
| u32 cs2a; /* Chip Select 2 Addition Register */ |
| u32 pad2; |
| u32 cs3u; /* Chip Select 3 Upper Register */ |
| u32 cs3l; /* Chip Select 3 Lower Register */ |
| u32 cs3a; /* Chip Select 3 Addition Register */ |
| u32 pad3; |
| u32 cs4u; /* Chip Select 4 Upper Register */ |
| u32 cs4l; /* Chip Select 4 Lower Register */ |
| u32 cs4a; /* Chip Select 4 Addition Register */ |
| u32 pad4; |
| u32 cs5u; /* Chip Select 5 Upper Register */ |
| u32 cs5l; /* Chip Select 5 Lower Register */ |
| u32 cs5a; /* Chip Select 5 Addition Register */ |
| u32 pad5; |
| u32 eim; /* WEIM Configuration Register */ |
| }; |
| |
| /* SDRAM Controller registers */ |
| struct esdramc_regs { |
| /* Enhanced SDRAM Control Register 0 */ |
| u32 esdctl0; |
| /* Enhanced SDRAM Configuration Register 0 */ |
| u32 esdcfg0; |
| /* Enhanced SDRAM Control Register 1 */ |
| u32 esdctl1; |
| /* Enhanced SDRAM Configuration Register 1 */ |
| u32 esdcfg1; |
| /* Enhanced SDRAM Miscellanious Register */ |
| u32 esdmisc; |
| }; |
| |
| /* Watchdog Registers*/ |
| struct wdog_regs { |
| u32 wcr; |
| u32 wsr; |
| u32 wstr; |
| }; |
| |
| /* PLL registers */ |
| struct pll_regs { |
| u32 cscr; /* Clock Source Control Register */ |
| u32 mpctl0; /* MCU PLL Control Register 0 */ |
| u32 mpctl1; /* MCU PLL Control Register 1 */ |
| u32 spctl0; /* System PLL Control Register 0 */ |
| u32 spctl1; /* System PLL Control Register 1 */ |
| u32 osc26mctl; /* Oscillator 26M Register */ |
| u32 pcdr0; /* Peripheral Clock Divider Register 0 */ |
| u32 pcdr1; /* Peripheral Clock Divider Register 1 */ |
| u32 pccr0; /* Peripheral Clock Control Register 0 */ |
| u32 pccr1; /* Peripheral Clock Control Register 1 */ |
| u32 ccsr; /* Clock Control Status Register */ |
| }; |
| |
| /* |
| * Definitions for the clocksource registers |
| */ |
| struct gpt_regs { |
| u32 gpt_tctl; |
| u32 gpt_tprer; |
| u32 gpt_tcmp; |
| u32 gpt_tcr; |
| u32 gpt_tcn; |
| u32 gpt_tstat; |
| }; |
| |
| /* |
| * GPIO Module and I/O Multiplexer |
| */ |
| #define PORTA 0 |
| #define PORTB 1 |
| #define PORTC 2 |
| #define PORTD 3 |
| #define PORTE 4 |
| #define PORTF 5 |
| |
| struct gpio_regs { |
| struct { |
| u32 ddir; |
| u32 ocr1; |
| u32 ocr2; |
| u32 iconfa1; |
| u32 iconfa2; |
| u32 iconfb1; |
| u32 iconfb2; |
| u32 dr; |
| u32 gius; |
| u32 ssr; |
| u32 icr1; |
| u32 icr2; |
| u32 imr; |
| u32 isr; |
| u32 gpr; |
| u32 swr; |
| u32 puen; |
| u32 res[0x2f]; |
| } port[6]; |
| }; |
| |
| /* IIM Control Registers */ |
| struct iim_regs { |
| u32 iim_stat; |
| u32 iim_statm; |
| u32 iim_err; |
| u32 iim_emask; |
| u32 iim_fctl; |
| u32 iim_ua; |
| u32 iim_la; |
| u32 iim_sdat; |
| u32 iim_prev; |
| u32 iim_srev; |
| u32 iim_prog_p; |
| u32 iim_scs0; |
| u32 iim_scs1; |
| u32 iim_scs2; |
| u32 iim_scs3; |
| u32 res[0x1f1]; |
| struct fuse_bank { |
| u32 fuse_regs[0x20]; |
| u32 fuse_rsvd[0xe0]; |
| } bank[1]; |
| }; |
| |
| struct fuse_bank0_regs { |
| u32 fuse0_3[5]; |
| u32 mac_addr[6]; |
| u32 fuse10_31[0x16]; |
| }; |
| |
| #endif |
| |
| #define IMX_IO_BASE 0x10000000 |
| |
| #define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) |
| #define IMX_WDT_BASE (0x02000 + IMX_IO_BASE) |
| #define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE) |
| #define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE) |
| #define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE) |
| #define UART1_BASE (0x0a000 + IMX_IO_BASE) |
| #define UART2_BASE (0x0b000 + IMX_IO_BASE) |
| #define UART3_BASE (0x0c000 + IMX_IO_BASE) |
| #define UART4_BASE (0x0d000 + IMX_IO_BASE) |
| #define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE) |
| #define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE) |
| #define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE) |
| #define IMX_TIM5_BASE (0x1a000 + IMX_IO_BASE) |
| #define IMX_UART5_BASE (0x1b000 + IMX_IO_BASE) |
| #define IMX_UART6_BASE (0x1c000 + IMX_IO_BASE) |
| #define IMX_I2C2_BASE (0x1D000 + IMX_IO_BASE) |
| #define IMX_TIM6_BASE (0x1f000 + IMX_IO_BASE) |
| #define IMX_AIPI2_BASE (0x20000 + IMX_IO_BASE) |
| #define IMX_PLL_BASE (0x27000 + IMX_IO_BASE) |
| #define IMX_SYSTEM_CTL_BASE (0x27800 + IMX_IO_BASE) |
| #define IMX_IIM_BASE (0x28000 + IMX_IO_BASE) |
| #define IMX_FEC_BASE (0x2b000 + IMX_IO_BASE) |
| |
| #define IMX_ESD_BASE (0xD8001000) |
| #define IMX_WEIM_BASE (0xD8002000) |
| |
| /* FMCR System Control bit definition*/ |
| #define UART4_RXD_CTL (1 << 25) |
| #define UART4_RTS_CTL (1 << 24) |
| #define KP_COL6_CTL (1 << 18) |
| #define KP_ROW7_CTL (1 << 17) |
| #define KP_ROW6_CTL (1 << 16) |
| #define PC_WAIT_B_CTL (1 << 14) |
| #define PC_READY_CTL (1 << 13) |
| #define PC_VS1_CTL (1 << 12) |
| #define PC_VS2_CTL (1 << 11) |
| #define PC_BVD1_CTL (1 << 10) |
| #define PC_BVD2_CTL (1 << 9) |
| #define IOS16_CTL (1 << 8) |
| #define NF_FMS (1 << 5) |
| #define NF_16BIT_SEL (1 << 4) |
| #define SLCDC_SEL (1 << 2) |
| #define SDCS1_SEL (1 << 1) |
| #define SDCS0_SEL (1 << 0) |
| |
| |
| /* important definition of some bits of WCR */ |
| #define WCR_WDE 0x04 |
| |
| #define CSCR_MPEN (1 << 0) |
| #define CSCR_SPEN (1 << 1) |
| #define CSCR_FPM_EN (1 << 2) |
| #define CSCR_OSC26M_DIS (1 << 3) |
| #define CSCR_OSC26M_DIV1P5 (1 << 4) |
| #define CSCR_AHB_DIV |
| #define CSCR_ARM_DIV |
| #define CSCR_ARM_SRC_MPLL (1 << 15) |
| #define CSCR_MCU_SEL (1 << 16) |
| #define CSCR_SP_SEL (1 << 17) |
| #define CSCR_MPLL_RESTART (1 << 18) |
| #define CSCR_SPLL_RESTART (1 << 19) |
| #define CSCR_MSHC_SEL (1 << 20) |
| #define CSCR_H264_SEL (1 << 21) |
| #define CSCR_SSI1_SEL (1 << 22) |
| #define CSCR_SSI2_SEL (1 << 23) |
| #define CSCR_SD_CNT |
| #define CSCR_USB_DIV |
| #define CSCR_UPDATE_DIS (1 << 31) |
| |
| #define MPCTL1_BRMO (1 << 6) |
| #define MPCTL1_LF (1 << 15) |
| |
| #define PCCR0_SSI2_EN (1 << 0) |
| #define PCCR0_SSI1_EN (1 << 1) |
| #define PCCR0_SLCDC_EN (1 << 2) |
| #define PCCR0_SDHC3_EN (1 << 3) |
| #define PCCR0_SDHC2_EN (1 << 4) |
| #define PCCR0_SDHC1_EN (1 << 5) |
| #define PCCR0_SDC_EN (1 << 6) |
| #define PCCR0_SAHARA_EN (1 << 7) |
| #define PCCR0_RTIC_EN (1 << 8) |
| #define PCCR0_RTC_EN (1 << 9) |
| #define PCCR0_PWM_EN (1 << 11) |
| #define PCCR0_OWIRE_EN (1 << 12) |
| #define PCCR0_MSHC_EN (1 << 13) |
| #define PCCR0_LCDC_EN (1 << 14) |
| #define PCCR0_KPP_EN (1 << 15) |
| #define PCCR0_IIM_EN (1 << 16) |
| #define PCCR0_I2C2_EN (1 << 17) |
| #define PCCR0_I2C1_EN (1 << 18) |
| #define PCCR0_GPT6_EN (1 << 19) |
| #define PCCR0_GPT5_EN (1 << 20) |
| #define PCCR0_GPT4_EN (1 << 21) |
| #define PCCR0_GPT3_EN (1 << 22) |
| #define PCCR0_GPT2_EN (1 << 23) |
| #define PCCR0_GPT1_EN (1 << 24) |
| #define PCCR0_GPIO_EN (1 << 25) |
| #define PCCR0_FEC_EN (1 << 26) |
| #define PCCR0_EMMA_EN (1 << 27) |
| #define PCCR0_DMA_EN (1 << 28) |
| #define PCCR0_CSPI3_EN (1 << 29) |
| #define PCCR0_CSPI2_EN (1 << 30) |
| #define PCCR0_CSPI1_EN (1 << 31) |
| |
| #define PCCR1_MSHC_BAUDEN (1 << 2) |
| #define PCCR1_NFC_BAUDEN (1 << 3) |
| #define PCCR1_SSI2_BAUDEN (1 << 4) |
| #define PCCR1_SSI1_BAUDEN (1 << 5) |
| #define PCCR1_H264_BAUDEN (1 << 6) |
| #define PCCR1_PERCLK4_EN (1 << 7) |
| #define PCCR1_PERCLK3_EN (1 << 8) |
| #define PCCR1_PERCLK2_EN (1 << 9) |
| #define PCCR1_PERCLK1_EN (1 << 10) |
| #define PCCR1_HCLK_USB (1 << 11) |
| #define PCCR1_HCLK_SLCDC (1 << 12) |
| #define PCCR1_HCLK_SAHARA (1 << 13) |
| #define PCCR1_HCLK_RTIC (1 << 14) |
| #define PCCR1_HCLK_LCDC (1 << 15) |
| #define PCCR1_HCLK_H264 (1 << 16) |
| #define PCCR1_HCLK_FEC (1 << 17) |
| #define PCCR1_HCLK_EMMA (1 << 18) |
| #define PCCR1_HCLK_EMI (1 << 19) |
| #define PCCR1_HCLK_DMA (1 << 20) |
| #define PCCR1_HCLK_CSI (1 << 21) |
| #define PCCR1_HCLK_BROM (1 << 22) |
| #define PCCR1_HCLK_ATA (1 << 23) |
| #define PCCR1_WDT_EN (1 << 24) |
| #define PCCR1_USB_EN (1 << 25) |
| #define PCCR1_UART6_EN (1 << 26) |
| #define PCCR1_UART5_EN (1 << 27) |
| #define PCCR1_UART4_EN (1 << 28) |
| #define PCCR1_UART3_EN (1 << 29) |
| #define PCCR1_UART2_EN (1 << 30) |
| #define PCCR1_UART1_EN (1 << 31) |
| |
| /* SDRAM Controller registers bitfields */ |
| #define ESDCTL_PRCT(x) (((x) & 0x3f) << 0) |
| #define ESDCTL_BL (1 << 7) |
| #define ESDCTL_FP (1 << 8) |
| #define ESDCTL_PWDT(x) (((x) & 3) << 10) |
| #define ESDCTL_SREFR(x) (((x) & 7) << 13) |
| #define ESDCTL_DSIZ_16_UPPER (0 << 16) |
| #define ESDCTL_DSIZ_16_LOWER (1 << 16) |
| #define ESDCTL_DSIZ_32 (2 << 16) |
| #define ESDCTL_COL8 (0 << 20) |
| #define ESDCTL_COL9 (1 << 20) |
| #define ESDCTL_COL10 (2 << 20) |
| #define ESDCTL_ROW11 (0 << 24) |
| #define ESDCTL_ROW12 (1 << 24) |
| #define ESDCTL_ROW13 (2 << 24) |
| #define ESDCTL_ROW14 (3 << 24) |
| #define ESDCTL_ROW15 (4 << 24) |
| #define ESDCTL_SP (1 << 27) |
| #define ESDCTL_SMODE_NORMAL (0 << 28) |
| #define ESDCTL_SMODE_PRECHARGE (1 << 28) |
| #define ESDCTL_SMODE_AUTO_REF (2 << 28) |
| #define ESDCTL_SMODE_LOAD_MODE (3 << 28) |
| #define ESDCTL_SMODE_MAN_REF (4 << 28) |
| #define ESDCTL_SDE (1 << 31) |
| |
| #define ESDCFG_TRC(x) (((x) & 0xf) << 0) |
| #define ESDCFG_TRCD(x) (((x) & 0x7) << 4) |
| #define ESDCFG_TCAS(x) (((x) & 0x3) << 8) |
| #define ESDCFG_TRRD(x) (((x) & 0x3) << 10) |
| #define ESDCFG_TRAS(x) (((x) & 0x7) << 12) |
| #define ESDCFG_TWR (1 << 15) |
| #define ESDCFG_TMRD(x) (((x) & 0x3) << 16) |
| #define ESDCFG_TRP(x) (((x) & 0x3) << 18) |
| #define ESDCFG_TWTR (1 << 20) |
| #define ESDCFG_TXP(x) (((x) & 0x3) << 21) |
| |
| #define ESDMISC_RST (1 << 1) |
| #define ESDMISC_MDDREN (1 << 2) |
| #define ESDMISC_MDDR_DL_RST (1 << 3) |
| #define ESDMISC_MDDR_MDIS (1 << 4) |
| #define ESDMISC_LHD (1 << 5) |
| #define ESDMISC_MA10_SHARE (1 << 6) |
| #define ESDMISC_SDRAM_RDY (1 << 31) |
| |
| #define PC5_PF_I2C2_DATA (GPIO_PORTC | GPIO_OUT | GPIO_PF | 5) |
| #define PC6_PF_I2C2_CLK (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) |
| #define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 7) |
| #define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 8) |
| #define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) |
| #define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 10) |
| #define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) |
| #define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 12) |
| #define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 13) |
| |
| #define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) |
| #define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) |
| #define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) |
| #define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) |
| #define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) |
| #define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) |
| #define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) |
| #define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) |
| #define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) |
| #define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) |
| #define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) |
| #define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) |
| #define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) |
| #define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) |
| #define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) |
| #define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) |
| #define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) |
| #define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) |
| |
| #define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_OUT | GPIO_PF | 0) |
| #define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_OUT | GPIO_PF | 1) |
| #define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_OUT | GPIO_PF | 2) |
| #define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) |
| #define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) |
| #define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) |
| #define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) |
| #define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) |
| #define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) |
| #define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) |
| #define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) |
| #define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) |
| #define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) |
| #define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) |
| #define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) |
| #define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) |
| #define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) |
| #define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) |
| #define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) |
| #define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) |
| #define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) |
| #define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) |
| #define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) |
| #define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) |
| #define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) |
| #define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) |
| #define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) |
| #define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) |
| #define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) |
| #define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 24) |
| #define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_OUT | GPIO_PF | 25) |
| |
| /* Clocksource Bitfields */ |
| #define TCTL_SWR (1 << 15) /* Software reset */ |
| #define TCTL_FRR (1 << 8) /* Freerun / restart */ |
| #define TCTL_CAP (3 << 6) /* Capture Edge */ |
| #define TCTL_OM (1 << 5) /* output mode */ |
| #define TCTL_IRQEN (1 << 4) /* interrupt enable */ |
| #define TCTL_CLKSOURCE 1 /* Clock source bit position */ |
| #define TCTL_TEN 1 /* Timer enable */ |
| #define TPRER_PRES 0xff /* Prescale */ |
| #define TSTAT_CAPT (1 << 1) /* Capture event */ |
| #define TSTAT_COMP 1 /* Compare event */ |
| |
| #define GPIO_PIN_MASK 0x1f |
| |
| #define GPIO_PORT_SHIFT 5 |
| #define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) |
| |
| #define GPIO_PORTA (PORTA << GPIO_PORT_SHIFT) |
| #define GPIO_PORTB (PORTB << GPIO_PORT_SHIFT) |
| #define GPIO_PORTC (PORTC << GPIO_PORT_SHIFT) |
| #define GPIO_PORTD (PORTD << GPIO_PORT_SHIFT) |
| #define GPIO_PORTE (PORTE << GPIO_PORT_SHIFT) |
| #define GPIO_PORTF (PORTF << GPIO_PORT_SHIFT) |
| |
| #define GPIO_OUT (1 << 8) |
| #define GPIO_IN (0 << 8) |
| #define GPIO_PUEN (1 << 9) |
| |
| #define GPIO_PF (1 << 10) |
| #define GPIO_AF (1 << 11) |
| |
| #define GPIO_OCR_SHIFT 12 |
| #define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) |
| #define GPIO_AIN (0 << GPIO_OCR_SHIFT) |
| #define GPIO_BIN (1 << GPIO_OCR_SHIFT) |
| #define GPIO_CIN (2 << GPIO_OCR_SHIFT) |
| #define GPIO_GPIO (3 << GPIO_OCR_SHIFT) |
| |
| #define GPIO_AOUT_SHIFT 14 |
| #define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) |
| #define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) |
| #define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) |
| #define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) |
| #define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) |
| |
| #define GPIO_BOUT_SHIFT 16 |
| #define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) |
| #define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) |
| #define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) |
| #define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) |
| #define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) |
| |
| #define IIM_STAT_BUSY (1 << 7) |
| #define IIM_STAT_PRGD (1 << 1) |
| #define IIM_STAT_SNSD (1 << 0) |
| #define IIM_ERR_PRGE (1 << 7) |
| #define IIM_ERR_WPE (1 << 6) |
| #define IIM_ERR_OPE (1 << 5) |
| #define IIM_ERR_RPE (1 << 4) |
| #define IIM_ERR_WLRE (1 << 3) |
| #define IIM_ERR_SNSE (1 << 2) |
| #define IIM_ERR_PARITYE (1 << 1) |
| |
| #endif /* _IMX_REGS_H */ |