include/configs/mx6sabre_common.h - github/trini/u-boot - Gitiles

 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __MX6QSABRE_COMMON_CONFIG_H
 #define __MX6QSABRE_COMMON_CONFIG_H

 #include "mx6_common.h"

 #define CONFIG_IMX_THERMAL

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT

 #define CONFIG_MXC_UART

 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		1

 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS

 #define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif

 /* Command definition */
 #define CONFIG_CMD_BMODE

 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 #define EMMC_ENV \
 	"emmcdev=2\0" \
 	"update_emmc_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
 			"if mmc dev ${emmcdev} 1; then "	\
 				"setexpr fw_sz ${filesize} / 0x200; " \
 				"setexpr fw_sz ${fw_sz} + 1; "	\
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0"
 #else
 #define EMMC_ENV ""
 #endif

 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"fdt_file=undefined\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
 	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
 	"dfu_alt_info_spl=spl raw 0x400\0" \
 	"dfu_alt_info_img=u-boot raw 0x10000\0" \
 	"dfu_alt_info=spl raw 0x400\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"if mmc dev ${mmcdev}; then "	\
 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
 				"setexpr fw_sz ${filesize} / 0x200; " \
 				"setexpr fw_sz ${fw_sz} + 1; "	\
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
 	EMMC_ENV	  \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
 				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
 		"run netargs; " \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootz; " \
 		"fi;\0" \
 		"findfdt="\
 			"if test $fdt_file = undefined; then " \
 				"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
 					"setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
 				"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
 					"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
 				"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 					"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
 				"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
 					"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
 				"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 					"setenv fdt_file imx6q-sabresd.dtb; fi; " \
 				"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
 					"setenv fdt_file imx6dl-sabresd.dtb; fi; " \
 				"if test $fdt_file = undefined; then " \
 					"echo WARNING: Could not determine dtb to use; fi; " \
 			"fi;\0" \


 #define CONFIG_BOOTCOMMAND \
 	"run findfdt;" \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
 		"if run loadbootscript; then " \
 		"run bootscript; " \
 		"else " \
 			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
 		"fi; " \
 	"else run netboot; fi"

 #define CONFIG_ARP_TIMEOUT     200UL

 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

 #define CONFIG_STACKSIZE               (128 * 1024)

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)

 #define CONFIG_ENV_IS_IN_MMC

 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
 #endif

 /* Framebuffer */
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #ifdef CONFIG_MX6DL
 #define CONFIG_IPUV3_CLK 198000000
 #else
 #define CONFIG_IPUV3_CLK 264000000
 #endif
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP

 #ifndef CONFIG_SPL
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET_DUALSPEED

 #define CONFIG_USB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW	2

 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER	"FSL"

 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000

 /* USB Device Firmware Update support */
 #define CONFIG_CMD_DFU
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_DFU_SF
 #endif

 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
	/*
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __MX6QSABRE_COMMON_CONFIG_H
	#define __MX6QSABRE_COMMON_CONFIG_H

	#include "mx6_common.h"

	#define CONFIG_IMX_THERMAL

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_BOARD_LATE_INIT

	#define CONFIG_MXC_UART

	/* MMC Configs */
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_MII
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 1

	#define CONFIG_PHYLIB
	#define CONFIG_PHY_ATHEROS

	#define CONFIG_CMD_SF
	#ifdef CONFIG_CMD_SF
	#define CONFIG_MXC_SPI
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 20000000
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#endif

	/* Command definition */
	#define CONFIG_CMD_BMODE

	#ifdef CONFIG_SUPPORT_EMMC_BOOT
	#define EMMC_ENV \
	"emmcdev=2\0" \
	"update_emmc_firmware=" \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	"if mmc dev ${emmcdev} 1; then " \
	"setexpr fw_sz ${filesize} / 0x200; " \
	"setexpr fw_sz ${fw_sz} + 1; " \
	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	"fi; " \
	"fi\0"
	#else
	#define EMMC_ENV ""
	#endif

	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdt_file=undefined\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	"dfu_alt_info_spl=spl raw 0x400\0" \
	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	"dfu_alt_info=spl raw 0x400\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"if mmc dev ${mmcdev}; then " \
	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	"setexpr fw_sz ${filesize} / 0x200; " \
	"setexpr fw_sz ${fw_sz} + 1; " \
	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	"fi; " \
	"fi\0" \
	EMMC_ENV \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot}\0" \
	"loadbootscript=" \
	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if run loadfdt; then " \
	"bootz ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${image}; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	"bootz ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;\0" \
	"findfdt="\
	"if test $fdt_file = undefined; then " \
	"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
	"setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
	"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
	"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
	"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
	"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
	"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
	"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
	"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
	"setenv fdt_file imx6q-sabresd.dtb; fi; " \
	"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
	"setenv fdt_file imx6dl-sabresd.dtb; fi; " \
	"if test $fdt_file = undefined; then " \
	"echo WARNING: Could not determine dtb to use; fi; " \
	"fi;\0" \


	#define CONFIG_BOOTCOMMAND \
	"run findfdt;" \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loadimage; then " \
	"run mmcboot; " \
	"else run netboot; " \
	"fi; " \
	"fi; " \
	"else run netboot; fi"

	#define CONFIG_ARP_TIMEOUT 200UL

	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END 0x10010000
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	#define CONFIG_STACKSIZE (128 * 1024)

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* Environment organization */
	#define CONFIG_ENV_SIZE (8 * 1024)

	#define CONFIG_ENV_IS_IN_MMC

	#if defined(CONFIG_ENV_IS_IN_MMC)
	#define CONFIG_ENV_OFFSET (8 * 64 * 1024)
	#endif

	/* Framebuffer */
	#define CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_BMP_LOGO
	#ifdef CONFIG_MX6DL
	#define CONFIG_IPUV3_CLK 198000000
	#else
	#define CONFIG_IPUV3_CLK 264000000
	#endif
	#define CONFIG_IMX_HDMI
	#define CONFIG_IMX_VIDEO_SKIP

	#ifndef CONFIG_SPL
	#define CONFIG_CI_UDC
	#define CONFIG_USBD_HS
	#define CONFIG_USB_GADGET_DUALSPEED

	#define CONFIG_USB_GADGET
	#define CONFIG_CMD_USB_MASS_STORAGE
	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	#define CONFIG_USB_GADGET_DOWNLOAD
	#define CONFIG_USB_GADGET_VBUS_DRAW 2

	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	#define CONFIG_G_DNL_MANUFACTURER "FSL"

	#define CONFIG_USB_FUNCTION_FASTBOOT
	#define CONFIG_CMD_FASTBOOT
	#define CONFIG_ANDROID_BOOT_IMAGE
	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
	#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000

	/* USB Device Firmware Update support */
	#define CONFIG_CMD_DFU
	#define CONFIG_USB_FUNCTION_DFU
	#define CONFIG_DFU_MMC
	#define CONFIG_DFU_SF
	#endif

	#endif /* __MX6QSABRE_COMMON_CONFIG_H */