| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2020, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #include <command.h> |
| #include <console.h> |
| #include <dfu.h> |
| #include <image.h> |
| #include <malloc.h> |
| #include <misc.h> |
| #include <mmc.h> |
| #include <part.h> |
| #include <tee.h> |
| #include <asm/arch/stm32mp1_smc.h> |
| #include <asm/global_data.h> |
| #include <dm/device_compat.h> |
| #include <dm/uclass.h> |
| #include <jffs2/load_kernel.h> |
| #include <linux/list.h> |
| #include <linux/list_sort.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/sizes.h> |
| |
| #include "stm32prog.h" |
| |
| /* Primary GPT header size for 128 entries : 17kB = 34 LBA of 512B */ |
| #define GPT_HEADER_SZ 34 |
| |
| #define OPT_SELECT BIT(0) |
| #define OPT_EMPTY BIT(1) |
| #define OPT_DELETE BIT(2) |
| |
| #define IS_SELECT(part) ((part)->option & OPT_SELECT) |
| #define IS_EMPTY(part) ((part)->option & OPT_EMPTY) |
| #define IS_DELETE(part) ((part)->option & OPT_DELETE) |
| |
| #define ALT_BUF_LEN SZ_1K |
| |
| #define ROOTFS_MMC0_UUID \ |
| EFI_GUID(0xE91C4E10, 0x16E6, 0x4C0E, \ |
| 0xBD, 0x0E, 0x77, 0xBE, 0xCF, 0x4A, 0x35, 0x82) |
| |
| #define ROOTFS_MMC1_UUID \ |
| EFI_GUID(0x491F6117, 0x415D, 0x4F53, \ |
| 0x88, 0xC9, 0x6E, 0x0D, 0xE5, 0x4D, 0xEA, 0xC6) |
| |
| #define ROOTFS_MMC2_UUID \ |
| EFI_GUID(0xFD58F1C7, 0xBE0D, 0x4338, \ |
| 0x88, 0xE9, 0xAD, 0x8F, 0x05, 0x0A, 0xEB, 0x18) |
| |
| /* RAW partition (binary / bootloader) used Linux - reserved UUID */ |
| #define LINUX_RESERVED_UUID "8DA63339-0007-60C0-C436-083AC8230908" |
| |
| /* |
| * unique partition guid (uuid) for partition named "rootfs" |
| * on each MMC instance = SD Card or eMMC |
| * allow fixed kernel bootcmd: "rootf=PARTUID=e91c4e10-..." |
| */ |
| static const efi_guid_t uuid_mmc[3] = { |
| ROOTFS_MMC0_UUID, |
| ROOTFS_MMC1_UUID, |
| ROOTFS_MMC2_UUID |
| }; |
| |
| /* FIP type partition UUID used by TF-A*/ |
| #define FIP_TYPE_UUID "19D5DF83-11B0-457B-BE2C-7559C13142A5" |
| |
| /* unique partition guid (uuid) for FIP partitions A/B */ |
| #define FIP_A_UUID \ |
| EFI_GUID(0x4FD84C93, 0x54EF, 0x463F, \ |
| 0xA7, 0xEF, 0xAE, 0x25, 0xFF, 0x88, 0x70, 0x87) |
| |
| #define FIP_B_UUID \ |
| EFI_GUID(0x09C54952, 0xD5BF, 0x45AF, \ |
| 0xAC, 0xEE, 0x33, 0x53, 0x03, 0x76, 0x6F, 0xB3) |
| |
| static const char * const fip_part_name[] = { |
| "fip-a", |
| "fip-b" |
| }; |
| |
| static const efi_guid_t fip_part_uuid[] = { |
| FIP_A_UUID, |
| FIP_B_UUID |
| }; |
| |
| /* order of column in flash layout file */ |
| enum stm32prog_col_t { |
| COL_OPTION, |
| COL_ID, |
| COL_NAME, |
| COL_TYPE, |
| COL_IP, |
| COL_OFFSET, |
| COL_NB_STM32 |
| }; |
| |
| #define FIP_TOC_HEADER_NAME 0xAA640001 |
| |
| struct fip_toc_header { |
| u32 name; |
| u32 serial_number; |
| u64 flags; |
| }; |
| |
| #define TA_NVMEM_UUID { 0x1a8342cc, 0x81a5, 0x4512, \ |
| { 0x99, 0xfe, 0x9e, 0x2b, 0x3e, 0x37, 0xd6, 0x26 } } |
| |
| /* |
| * Read NVMEM memory for STM32CubeProgrammer |
| * |
| * [in] value[0].a: Type (0 for OTP access) |
| * [out] memref[1].buffer Output buffer to return all read values |
| * [out] memref[1].size Size of buffer to be read |
| * |
| * Return codes: |
| * TEE_SUCCESS - Invoke command success |
| * TEE_ERROR_BAD_PARAMETERS - Incorrect input param |
| */ |
| #define TA_NVMEM_READ 0x0 |
| |
| /* |
| * Write NVMEM memory for STM32CubeProgrammer |
| * |
| * [in] value[0].a Type (0 for OTP access) |
| * [in] memref[1].buffer Input buffer with the values to write |
| * [in] memref[1].size Size of buffer to be written |
| * |
| * Return codes: |
| * TEE_SUCCESS - Invoke command success |
| * TEE_ERROR_BAD_PARAMETERS - Incorrect input param |
| */ |
| #define TA_NVMEM_WRITE 0x1 |
| |
| /* value of TA_NVMEM type = value[in] a */ |
| #define NVMEM_OTP 0 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* OPTEE TA NVMEM open helper */ |
| static int optee_ta_open(struct stm32prog_data *data) |
| { |
| const struct tee_optee_ta_uuid uuid = TA_NVMEM_UUID; |
| struct tee_open_session_arg arg; |
| struct udevice *tee = NULL; |
| int rc; |
| |
| if (data->tee) |
| return 0; |
| |
| tee = tee_find_device(NULL, NULL, NULL, NULL); |
| if (!tee) |
| return -ENODEV; |
| |
| memset(&arg, 0, sizeof(arg)); |
| tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); |
| rc = tee_open_session(tee, &arg, 0, NULL); |
| if (rc < 0) |
| return -ENODEV; |
| |
| data->tee = tee; |
| data->tee_session = arg.session; |
| |
| return 0; |
| } |
| |
| /* OPTEE TA NVMEM invoke helper */ |
| static int optee_ta_invoke(struct stm32prog_data *data, int cmd, int type, |
| void *buff, ulong size) |
| { |
| struct tee_invoke_arg arg; |
| struct tee_param param[2]; |
| struct tee_shm *buff_shm; |
| int rc; |
| |
| rc = tee_shm_register(data->tee, buff, size, 0, &buff_shm); |
| if (rc) |
| return rc; |
| |
| memset(&arg, 0, sizeof(arg)); |
| arg.func = cmd; |
| arg.session = data->tee_session; |
| |
| memset(param, 0, sizeof(param)); |
| param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT; |
| param[0].u.value.a = type; |
| |
| if (cmd == TA_NVMEM_WRITE) |
| param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT; |
| else |
| param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_OUTPUT; |
| |
| param[1].u.memref.shm = buff_shm; |
| param[1].u.memref.size = size; |
| |
| rc = tee_invoke_func(data->tee, &arg, 2, param); |
| if (rc < 0 || arg.ret != 0) { |
| dev_err(data->tee, |
| "TA_NVMEM invoke failed TEE err: %x, err:%x\n", |
| arg.ret, rc); |
| if (!rc) |
| rc = -EIO; |
| } |
| |
| tee_shm_free(buff_shm); |
| |
| return rc; |
| } |
| |
| /* partition handling routines : CONFIG_CMD_MTDPARTS */ |
| int mtdparts_init(void); |
| int find_dev_and_part(const char *id, struct mtd_device **dev, |
| u8 *part_num, struct part_info **part); |
| |
| char *stm32prog_get_error(struct stm32prog_data *data) |
| { |
| static const char error_msg[] = "Unspecified"; |
| |
| if (strlen(data->error) == 0) |
| strcpy(data->error, error_msg); |
| |
| return data->error; |
| } |
| |
| static bool stm32prog_is_fip_header(struct fip_toc_header *header) |
| { |
| return (header->name == FIP_TOC_HEADER_NAME) && header->serial_number; |
| } |
| |
| static bool stm32prog_is_stm32_header_v1(struct stm32_header_v1 *header) |
| { |
| unsigned int i; |
| |
| if (header->magic_number != |
| (('S' << 0) | ('T' << 8) | ('M' << 16) | (0x32 << 24))) { |
| log_debug("%s:invalid magic number : 0x%x\n", |
| __func__, header->magic_number); |
| return false; |
| } |
| if (header->header_version != 0x00010000) { |
| log_debug("%s:invalid header version : 0x%x\n", |
| __func__, header->header_version); |
| return false; |
| } |
| |
| if (header->reserved1 || header->reserved2) { |
| log_debug("%s:invalid reserved field\n", __func__); |
| return false; |
| } |
| for (i = 0; i < sizeof(header->padding); i++) { |
| if (header->padding[i] != 0) { |
| log_debug("%s:invalid padding field\n", __func__); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool stm32prog_is_stm32_header_v2(struct stm32_header_v2 *header) |
| { |
| unsigned int i; |
| |
| if (header->magic_number != |
| (('S' << 0) | ('T' << 8) | ('M' << 16) | (0x32 << 24))) { |
| log_debug("%s:invalid magic number : 0x%x\n", |
| __func__, header->magic_number); |
| return false; |
| } |
| if (header->header_version != 0x00020000) { |
| log_debug("%s:invalid header version : 0x%x\n", |
| __func__, header->header_version); |
| return false; |
| } |
| if (header->reserved1 || header->reserved2) |
| return false; |
| |
| for (i = 0; i < sizeof(header->padding); i++) { |
| if (header->padding[i] != 0) { |
| log_debug("%s:invalid padding field\n", __func__); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| void stm32prog_header_check(uintptr_t raw_header, struct image_header_s *header) |
| { |
| struct stm32_header_v1 *v1_header = (struct stm32_header_v1 *)raw_header; |
| struct stm32_header_v2 *v2_header = (struct stm32_header_v2 *)raw_header; |
| |
| if (!raw_header || !header) { |
| log_debug("%s:no header data\n", __func__); |
| return; |
| } |
| |
| if (stm32prog_is_fip_header((struct fip_toc_header *)raw_header)) { |
| header->type = HEADER_FIP; |
| header->length = 0; |
| return; |
| } |
| if (stm32prog_is_stm32_header_v1(v1_header)) { |
| header->type = HEADER_STM32IMAGE; |
| header->image_checksum = le32_to_cpu(v1_header->image_checksum); |
| header->image_length = le32_to_cpu(v1_header->image_length); |
| header->length = sizeof(struct stm32_header_v1); |
| return; |
| } |
| if (stm32prog_is_stm32_header_v2(v2_header)) { |
| header->type = HEADER_STM32IMAGE_V2; |
| header->image_checksum = le32_to_cpu(v2_header->image_checksum); |
| header->image_length = le32_to_cpu(v2_header->image_length); |
| header->length = sizeof(struct stm32_header_v1) + |
| v2_header->extension_headers_length; |
| return; |
| } |
| |
| header->type = HEADER_NONE; |
| header->image_checksum = 0x0; |
| header->image_length = 0x0; |
| } |
| |
| static u32 stm32prog_header_checksum(uintptr_t addr, struct image_header_s *header) |
| { |
| u32 i, checksum; |
| u8 *payload; |
| |
| /* compute checksum on payload */ |
| payload = (u8 *)addr; |
| checksum = 0; |
| for (i = header->image_length; i > 0; i--) |
| checksum += *(payload++); |
| |
| return checksum; |
| } |
| |
| /* FLASHLAYOUT PARSING *****************************************/ |
| static int parse_option(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| char *c = p; |
| |
| part->option = 0; |
| if (!strcmp(p, "-")) |
| return 0; |
| |
| while (*c) { |
| switch (*c) { |
| case 'P': |
| part->option |= OPT_SELECT; |
| break; |
| case 'E': |
| part->option |= OPT_EMPTY; |
| break; |
| case 'D': |
| part->option |= OPT_DELETE; |
| break; |
| default: |
| result = -EINVAL; |
| stm32prog_err("Layout line %d: invalid option '%c' in %s)", |
| i, *c, p); |
| return -EINVAL; |
| } |
| c++; |
| } |
| if (!(part->option & OPT_SELECT)) { |
| stm32prog_err("Layout line %d: missing 'P' in option %s", i, p); |
| return -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static int parse_id(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| unsigned long value; |
| |
| result = strict_strtoul(p, 0, &value); |
| part->id = value; |
| if (result || value > PHASE_LAST_USER) { |
| stm32prog_err("Layout line %d: invalid phase value = %s", i, p); |
| result = -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static int parse_name(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| |
| if (strlen(p) < sizeof(part->name)) { |
| strcpy(part->name, p); |
| } else { |
| stm32prog_err("Layout line %d: partition name too long [%zd]: %s", |
| i, strlen(p), p); |
| result = -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static int parse_type(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| int len = 0; |
| |
| part->bin_nb = 0; |
| if (!strncmp(p, "Binary", 6)) { |
| part->part_type = PART_BINARY; |
| |
| /* search for Binary(X) case */ |
| len = strlen(p); |
| part->bin_nb = 1; |
| if (len > 6) { |
| if (len < 8 || |
| (p[6] != '(') || |
| (p[len - 1] != ')')) |
| result = -EINVAL; |
| else |
| part->bin_nb = |
| dectoul(&p[7], NULL); |
| } |
| } else if (!strcmp(p, "FIP")) { |
| part->part_type = PART_FIP; |
| } else if (!strcmp(p, "System")) { |
| part->part_type = PART_SYSTEM; |
| } else if (!strcmp(p, "FileSystem")) { |
| part->part_type = PART_FILESYSTEM; |
| } else if (!strcmp(p, "RawImage")) { |
| part->part_type = RAW_IMAGE; |
| } else { |
| result = -EINVAL; |
| } |
| if (result) |
| stm32prog_err("Layout line %d: type parsing error : '%s'", |
| i, p); |
| |
| return result; |
| } |
| |
| static int parse_ip(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| unsigned int len = 0; |
| |
| part->dev_id = 0; |
| if (!strcmp(p, "none")) { |
| part->target = STM32PROG_NONE; |
| } else if (!strncmp(p, "mmc", 3)) { |
| part->target = STM32PROG_MMC; |
| len = 3; |
| } else if (!strncmp(p, "nor", 3)) { |
| part->target = STM32PROG_NOR; |
| len = 3; |
| } else if (!strncmp(p, "nand", 4)) { |
| part->target = STM32PROG_NAND; |
| len = 4; |
| } else if (!strncmp(p, "spi-nand", 8)) { |
| part->target = STM32PROG_SPI_NAND; |
| len = 8; |
| } else if (!strncmp(p, "ram", 3)) { |
| part->target = STM32PROG_RAM; |
| len = 0; |
| } else { |
| result = -EINVAL; |
| } |
| if (len) { |
| /* only one digit allowed for device id */ |
| if (strlen(p) != len + 1) { |
| result = -EINVAL; |
| } else { |
| part->dev_id = p[len] - '0'; |
| if (part->dev_id > 9) |
| result = -EINVAL; |
| } |
| } |
| if (result) |
| stm32prog_err("Layout line %d: ip parsing error: '%s'", i, p); |
| |
| return result; |
| } |
| |
| static int parse_offset(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| char *tail; |
| |
| part->part_id = 0; |
| part->addr = 0; |
| part->size = 0; |
| /* eMMC boot parttion */ |
| if (!strncmp(p, "boot", 4)) { |
| if (strlen(p) != 5) { |
| result = -EINVAL; |
| } else { |
| if (p[4] == '1') |
| part->part_id = -1; |
| else if (p[4] == '2') |
| part->part_id = -2; |
| else |
| result = -EINVAL; |
| } |
| if (result) |
| stm32prog_err("Layout line %d: invalid part '%s'", |
| i, p); |
| } else { |
| part->addr = simple_strtoull(p, &tail, 0); |
| if (tail == p || *tail != '\0') { |
| stm32prog_err("Layout line %d: invalid offset '%s'", |
| i, p); |
| result = -EINVAL; |
| } |
| } |
| |
| return result; |
| } |
| |
| static |
| int (* const parse[COL_NB_STM32])(struct stm32prog_data *data, int i, char *p, |
| struct stm32prog_part_t *part) = { |
| [COL_OPTION] = parse_option, |
| [COL_ID] = parse_id, |
| [COL_NAME] = parse_name, |
| [COL_TYPE] = parse_type, |
| [COL_IP] = parse_ip, |
| [COL_OFFSET] = parse_offset, |
| }; |
| |
| static int parse_flash_layout(struct stm32prog_data *data, |
| uintptr_t addr, |
| ulong size) |
| { |
| int column = 0, part_nb = 0, ret; |
| bool end_of_line, eof; |
| char *p, *start, *last, *col; |
| struct stm32prog_part_t *part; |
| struct image_header_s header; |
| int part_list_size; |
| int i; |
| |
| data->part_nb = 0; |
| |
| /* check if STM32image is detected */ |
| stm32prog_header_check(addr, &header); |
| if (header.type == HEADER_STM32IMAGE) { |
| u32 checksum; |
| |
| addr = addr + header.length; |
| size = header.image_length; |
| |
| checksum = stm32prog_header_checksum(addr, &header); |
| if (checksum != header.image_checksum) { |
| stm32prog_err("Layout: invalid checksum : 0x%x expected 0x%x", |
| checksum, header.image_checksum); |
| return -EIO; |
| } |
| } |
| if (!size) |
| return -EINVAL; |
| |
| start = (char *)addr; |
| last = start + size; |
| |
| *last = 0x0; /* force null terminated string */ |
| log_debug("flash layout =\n%s\n", start); |
| |
| /* calculate expected number of partitions */ |
| part_list_size = 1; |
| p = start; |
| while (*p && (p < last)) { |
| if (*p++ == '\n') { |
| part_list_size++; |
| if (p < last && *p == '#') |
| part_list_size--; |
| } |
| } |
| if (part_list_size > PHASE_LAST_USER) { |
| stm32prog_err("Layout: too many partition (%d)", |
| part_list_size); |
| return -1; |
| } |
| part = calloc(sizeof(struct stm32prog_part_t), part_list_size); |
| if (!part) { |
| stm32prog_err("Layout: alloc failed"); |
| return -ENOMEM; |
| } |
| data->part_array = part; |
| |
| /* main parsing loop */ |
| i = 1; |
| eof = false; |
| p = start; |
| col = start; /* 1st column */ |
| end_of_line = false; |
| while (!eof) { |
| switch (*p) { |
| /* CR is ignored and replaced by NULL character */ |
| case '\r': |
| *p = '\0'; |
| p++; |
| continue; |
| case '\0': |
| end_of_line = true; |
| eof = true; |
| break; |
| case '\n': |
| end_of_line = true; |
| break; |
| case '\t': |
| break; |
| case '#': |
| /* comment line is skipped */ |
| if (column == 0 && p == col) { |
| while ((p < last) && *p) |
| if (*p++ == '\n') |
| break; |
| col = p; |
| i++; |
| if (p >= last || !*p) { |
| eof = true; |
| end_of_line = true; |
| } |
| continue; |
| } |
| /* fall through */ |
| /* by default continue with the next character */ |
| default: |
| p++; |
| continue; |
| } |
| |
| /* replace by \0: allow string parsing for each column */ |
| *p = '\0'; |
| p++; |
| if (p >= last) { |
| eof = true; |
| end_of_line = true; |
| } |
| |
| /* skip empty line and multiple TAB in tsv file */ |
| if (strlen(col) == 0) { |
| col = p; |
| /* skip empty line */ |
| if (column == 0 && end_of_line) { |
| end_of_line = false; |
| i++; |
| } |
| continue; |
| } |
| |
| if (column < COL_NB_STM32) { |
| ret = parse[column](data, i, col, part); |
| if (ret) |
| return ret; |
| } |
| |
| /* save the beginning of the next column */ |
| column++; |
| col = p; |
| |
| if (!end_of_line) |
| continue; |
| |
| /* end of the line detected */ |
| end_of_line = false; |
| |
| if (column < COL_NB_STM32) { |
| stm32prog_err("Layout line %d: no enought column", i); |
| return -EINVAL; |
| } |
| column = 0; |
| part_nb++; |
| part++; |
| i++; |
| if (part_nb >= part_list_size) { |
| part = NULL; |
| if (!eof) { |
| stm32prog_err("Layout: no enought memory for %d part", |
| part_nb); |
| return -EINVAL; |
| } |
| } |
| } |
| data->part_nb = part_nb; |
| if (data->part_nb == 0) { |
| stm32prog_err("Layout: no partition found"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int __init part_cmp(void *priv, struct list_head *a, struct list_head *b) |
| { |
| struct stm32prog_part_t *parta, *partb; |
| |
| parta = container_of(a, struct stm32prog_part_t, list); |
| partb = container_of(b, struct stm32prog_part_t, list); |
| |
| if (parta->part_id != partb->part_id) |
| return parta->part_id - partb->part_id; |
| else |
| return parta->addr > partb->addr ? 1 : -1; |
| } |
| |
| static void get_mtd_by_target(char *string, enum stm32prog_target target, |
| int dev_id) |
| { |
| const char *dev_str; |
| |
| switch (target) { |
| case STM32PROG_NOR: |
| dev_str = "nor"; |
| break; |
| case STM32PROG_NAND: |
| dev_str = "nand"; |
| break; |
| case STM32PROG_SPI_NAND: |
| dev_str = "spi-nand"; |
| break; |
| default: |
| dev_str = "invalid"; |
| break; |
| } |
| sprintf(string, "%s%d", dev_str, dev_id); |
| } |
| |
| static int init_device(struct stm32prog_data *data, |
| struct stm32prog_dev_t *dev) |
| { |
| struct mmc *mmc = NULL; |
| struct blk_desc *block_dev = NULL; |
| struct mtd_info *mtd = NULL; |
| char mtd_id[16]; |
| int part_id; |
| int ret; |
| u64 first_addr = 0, last_addr = 0; |
| struct stm32prog_part_t *part, *next_part; |
| u64 part_addr, part_size; |
| bool part_found; |
| const char *part_name; |
| |
| switch (dev->target) { |
| case STM32PROG_MMC: |
| if (!IS_ENABLED(CONFIG_MMC)) { |
| stm32prog_err("unknown device type = %d", dev->target); |
| return -ENODEV; |
| } |
| mmc = find_mmc_device(dev->dev_id); |
| if (!mmc || mmc_init(mmc)) { |
| stm32prog_err("mmc device %d not found", dev->dev_id); |
| return -ENODEV; |
| } |
| block_dev = mmc_get_blk_desc(mmc); |
| if (!block_dev) { |
| stm32prog_err("mmc device %d not probed", dev->dev_id); |
| return -ENODEV; |
| } |
| dev->erase_size = mmc->erase_grp_size * block_dev->blksz; |
| dev->mmc = mmc; |
| |
| /* reserve a full erase group for each GTP headers */ |
| if (mmc->erase_grp_size > GPT_HEADER_SZ) { |
| first_addr = dev->erase_size; |
| last_addr = (u64)(block_dev->lba - |
| mmc->erase_grp_size) * |
| block_dev->blksz; |
| } else { |
| first_addr = (u64)GPT_HEADER_SZ * block_dev->blksz; |
| last_addr = (u64)(block_dev->lba - GPT_HEADER_SZ - 1) * |
| block_dev->blksz; |
| } |
| log_debug("MMC %d: lba=%ld blksz=%ld\n", dev->dev_id, |
| block_dev->lba, block_dev->blksz); |
| log_debug(" available address = 0x%llx..0x%llx\n", |
| first_addr, last_addr); |
| log_debug(" full_update = %d\n", dev->full_update); |
| break; |
| case STM32PROG_NOR: |
| case STM32PROG_NAND: |
| case STM32PROG_SPI_NAND: |
| if (!IS_ENABLED(CONFIG_MTD)) { |
| stm32prog_err("unknown device type = %d", dev->target); |
| return -ENODEV; |
| } |
| get_mtd_by_target(mtd_id, dev->target, dev->dev_id); |
| log_debug("%s\n", mtd_id); |
| |
| mtdparts_init(); |
| mtd = get_mtd_device_nm(mtd_id); |
| if (IS_ERR(mtd)) { |
| stm32prog_err("MTD device %s not found", mtd_id); |
| return -ENODEV; |
| } |
| first_addr = 0; |
| last_addr = mtd->size; |
| dev->erase_size = mtd->erasesize; |
| log_debug("MTD device %s: size=%lld erasesize=%d\n", |
| mtd_id, mtd->size, mtd->erasesize); |
| log_debug(" available address = 0x%llx..0x%llx\n", |
| first_addr, last_addr); |
| dev->mtd = mtd; |
| break; |
| case STM32PROG_RAM: |
| first_addr = gd->bd->bi_dram[0].start; |
| last_addr = first_addr + gd->bd->bi_dram[0].size; |
| dev->erase_size = 1; |
| break; |
| default: |
| stm32prog_err("unknown device type = %d", dev->target); |
| return -ENODEV; |
| } |
| log_debug(" erase size = 0x%x\n", dev->erase_size); |
| log_debug(" full_update = %d\n", dev->full_update); |
| |
| /* order partition list in offset order */ |
| list_sort(NULL, &dev->part_list, &part_cmp); |
| part_id = 1; |
| log_debug("id : Opt Phase Name target.n dev.n addr size part_off part_size\n"); |
| list_for_each_entry(part, &dev->part_list, list) { |
| if (part->bin_nb > 1) { |
| if ((dev->target != STM32PROG_NAND && |
| dev->target != STM32PROG_SPI_NAND) || |
| part->id >= PHASE_FIRST_USER || |
| strncmp(part->name, "fsbl", 4)) { |
| stm32prog_err("%s (0x%x): multiple binary %d not supported", |
| part->name, part->id, |
| part->bin_nb); |
| return -EINVAL; |
| } |
| } |
| if (part->part_type == RAW_IMAGE) { |
| part->part_id = 0x0; |
| part->addr = 0x0; |
| if (block_dev) |
| part->size = block_dev->lba * block_dev->blksz; |
| else |
| part->size = last_addr; |
| log_debug("-- : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx\n", |
| part->option, part->id, part->name, |
| part->part_type, part->bin_nb, part->target, |
| part->dev_id, part->addr, part->size); |
| continue; |
| } |
| if (part->part_id < 0) { /* boot hw partition for eMMC */ |
| if (mmc) { |
| part->size = mmc->capacity_boot; |
| } else { |
| stm32prog_err("%s (0x%x): hw partition not expected : %d", |
| part->name, part->id, |
| part->part_id); |
| return -ENODEV; |
| } |
| } else { |
| part->part_id = part_id++; |
| |
| /* last partition : size to the end of the device */ |
| if (part->list.next != &dev->part_list) { |
| next_part = |
| container_of(part->list.next, |
| struct stm32prog_part_t, |
| list); |
| if (part->addr < next_part->addr) { |
| part->size = next_part->addr - |
| part->addr; |
| } else { |
| stm32prog_err("%s (0x%x): same address : 0x%llx == %s (0x%x): 0x%llx", |
| part->name, part->id, |
| part->addr, |
| next_part->name, |
| next_part->id, |
| next_part->addr); |
| return -EINVAL; |
| } |
| } else { |
| if (part->addr <= last_addr) { |
| part->size = last_addr - part->addr; |
| } else { |
| stm32prog_err("%s (0x%x): invalid address 0x%llx (max=0x%llx)", |
| part->name, part->id, |
| part->addr, last_addr); |
| return -EINVAL; |
| } |
| } |
| if (part->addr < first_addr) { |
| stm32prog_err("%s (0x%x): invalid address 0x%llx (min=0x%llx)", |
| part->name, part->id, |
| part->addr, first_addr); |
| return -EINVAL; |
| } |
| } |
| if ((part->addr & ((u64)part->dev->erase_size - 1)) != 0) { |
| stm32prog_err("%s (0x%x): not aligned address : 0x%llx on erase size 0x%x", |
| part->name, part->id, part->addr, |
| part->dev->erase_size); |
| return -EINVAL; |
| } |
| log_debug("%02d : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx", |
| part->part_id, part->option, part->id, part->name, |
| part->part_type, part->bin_nb, part->target, |
| part->dev_id, part->addr, part->size); |
| |
| part_addr = 0; |
| part_size = 0; |
| part_found = false; |
| |
| /* check coherency with existing partition */ |
| if (block_dev) { |
| /* |
| * block devices with GPT: check user partition size |
| * only for partial update, the GPT partions are be |
| * created for full update |
| */ |
| if (dev->full_update || part->part_id < 0) { |
| log_debug("\n"); |
| continue; |
| } |
| struct disk_partition partinfo; |
| |
| ret = part_get_info(block_dev, part->part_id, |
| &partinfo); |
| |
| if (ret) { |
| stm32prog_err("%s (0x%x):Couldn't find part %d on device mmc %d", |
| part->name, part->id, |
| part_id, part->dev_id); |
| return -ENODEV; |
| } |
| part_addr = (u64)partinfo.start * partinfo.blksz; |
| part_size = (u64)partinfo.size * partinfo.blksz; |
| part_name = (char *)partinfo.name; |
| part_found = true; |
| } |
| |
| if (IS_ENABLED(CONFIG_MTD) && mtd) { |
| char mtd_part_id[32]; |
| struct part_info *mtd_part; |
| struct mtd_device *mtd_dev; |
| u8 part_num; |
| |
| sprintf(mtd_part_id, "%s,%d", mtd_id, |
| part->part_id - 1); |
| ret = find_dev_and_part(mtd_part_id, &mtd_dev, |
| &part_num, &mtd_part); |
| if (ret != 0) { |
| stm32prog_err("%s (0x%x): Invalid MTD partition %s", |
| part->name, part->id, |
| mtd_part_id); |
| return -ENODEV; |
| } |
| part_addr = mtd_part->offset; |
| part_size = mtd_part->size; |
| part_name = mtd_part->name; |
| part_found = true; |
| } |
| |
| /* no partition for this device */ |
| if (!part_found) { |
| log_debug("\n"); |
| continue; |
| } |
| |
| log_debug(" %08llx %08llx\n", part_addr, part_size); |
| |
| if (part->addr != part_addr) { |
| stm32prog_err("%s (0x%x): Bad address for partition %d (%s) = 0x%llx <> 0x%llx expected", |
| part->name, part->id, part->part_id, |
| part_name, part->addr, part_addr); |
| return -ENODEV; |
| } |
| if (part->size != part_size) { |
| stm32prog_err("%s (0x%x): Bad size for partition %d (%s) at 0x%llx = 0x%llx <> 0x%llx expected", |
| part->name, part->id, part->part_id, |
| part_name, part->addr, part->size, |
| part_size); |
| return -ENODEV; |
| } |
| } |
| return 0; |
| } |
| |
| static int treat_partition_list(struct stm32prog_data *data) |
| { |
| int i, j; |
| struct stm32prog_part_t *part; |
| |
| for (j = 0; j < STM32PROG_MAX_DEV; j++) { |
| data->dev[j].target = STM32PROG_NONE; |
| INIT_LIST_HEAD(&data->dev[j].part_list); |
| } |
| |
| #ifdef CONFIG_STM32MP15x_STM32IMAGE |
| data->tee_detected = false; |
| #endif |
| data->fsbl_nor_detected = false; |
| for (i = 0; i < data->part_nb; i++) { |
| part = &data->part_array[i]; |
| part->alt_id = -1; |
| |
| /* skip partition with IP="none" */ |
| if (part->target == STM32PROG_NONE) { |
| if (IS_SELECT(part)) { |
| stm32prog_err("Layout: selected none phase = 0x%x for part %s", |
| part->id, part->name); |
| return -EINVAL; |
| } |
| continue; |
| } |
| |
| if (part->id == PHASE_FLASHLAYOUT || |
| part->id > PHASE_LAST_USER) { |
| stm32prog_err("Layout: invalid phase = 0x%x for part %s", |
| part->id, part->name); |
| return -EINVAL; |
| } |
| for (j = i + 1; j < data->part_nb; j++) { |
| if (part->id == data->part_array[j].id) { |
| stm32prog_err("Layout: duplicated phase 0x%x for part %s and %s", |
| part->id, part->name, data->part_array[j].name); |
| return -EINVAL; |
| } |
| } |
| for (j = 0; j < STM32PROG_MAX_DEV; j++) { |
| if (data->dev[j].target == STM32PROG_NONE) { |
| /* new device found */ |
| data->dev[j].target = part->target; |
| data->dev[j].dev_id = part->dev_id; |
| data->dev[j].full_update = true; |
| data->dev_nb++; |
| break; |
| } else if ((part->target == data->dev[j].target) && |
| (part->dev_id == data->dev[j].dev_id)) { |
| break; |
| } |
| } |
| if (j == STM32PROG_MAX_DEV) { |
| stm32prog_err("Layout: too many device"); |
| return -EINVAL; |
| } |
| switch (part->target) { |
| case STM32PROG_NOR: |
| if (!data->fsbl_nor_detected && |
| !strncmp(part->name, "fsbl", 4)) |
| data->fsbl_nor_detected = true; |
| /* fallthrough */ |
| case STM32PROG_NAND: |
| case STM32PROG_SPI_NAND: |
| #ifdef CONFIG_STM32MP15x_STM32IMAGE |
| if (!data->tee_detected && |
| !strncmp(part->name, "tee", 3)) |
| data->tee_detected = true; |
| break; |
| #endif |
| default: |
| break; |
| } |
| part->dev = &data->dev[j]; |
| if (!IS_SELECT(part)) |
| part->dev->full_update = false; |
| list_add_tail(&part->list, &data->dev[j].part_list); |
| } |
| |
| return 0; |
| } |
| |
| static int create_gpt_partitions(struct stm32prog_data *data) |
| { |
| int offset = 0; |
| const int buflen = SZ_8K; |
| char *buf; |
| char uuid[UUID_STR_LEN + 1]; |
| unsigned char *uuid_bin; |
| unsigned int mmc_id; |
| int i, j; |
| bool rootfs_found; |
| struct stm32prog_part_t *part; |
| const char *type_str; |
| |
| buf = malloc(buflen); |
| if (!buf) |
| return -ENOMEM; |
| |
| /* initialize the selected device */ |
| for (i = 0; i < data->dev_nb; i++) { |
| /* create gpt partition support only for full update on MMC */ |
| if (data->dev[i].target != STM32PROG_MMC || |
| !data->dev[i].full_update) |
| continue; |
| |
| printf("partitions on mmc%d: ", data->dev[i].dev_id); |
| offset = 0; |
| rootfs_found = false; |
| memset(buf, 0, buflen); |
| |
| list_for_each_entry(part, &data->dev[i].part_list, list) { |
| /* skip eMMC boot partitions */ |
| if (part->part_id < 0) |
| continue; |
| /* skip Raw Image */ |
| if (part->part_type == RAW_IMAGE) |
| continue; |
| |
| if (offset + 100 > buflen) { |
| log_debug("\n%s: buffer too small, %s skippped", |
| __func__, part->name); |
| continue; |
| } |
| |
| if (!offset) |
| offset += sprintf(buf, "gpt write mmc %d \"", |
| data->dev[i].dev_id); |
| |
| offset += snprintf(buf + offset, buflen - offset, |
| "name=%s,start=0x%llx,size=0x%llx", |
| part->name, |
| part->addr, |
| part->size); |
| |
| switch (part->part_type) { |
| case PART_BINARY: |
| type_str = LINUX_RESERVED_UUID; |
| break; |
| case PART_FIP: |
| type_str = FIP_TYPE_UUID; |
| break; |
| default: |
| type_str = "linux"; |
| break; |
| } |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",type=%s", type_str); |
| |
| if (part->part_type == PART_SYSTEM) |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",bootable"); |
| |
| /* partition UUID */ |
| uuid_bin = NULL; |
| if (!rootfs_found && !strcmp(part->name, "rootfs")) { |
| mmc_id = part->dev_id; |
| rootfs_found = true; |
| if (mmc_id < ARRAY_SIZE(uuid_mmc)) |
| uuid_bin = (unsigned char *)uuid_mmc[mmc_id].b; |
| } |
| if (part->part_type == PART_FIP) { |
| for (j = 0; j < ARRAY_SIZE(fip_part_name); j++) |
| if (!strcmp(part->name, fip_part_name[j])) { |
| uuid_bin = (unsigned char *)fip_part_uuid[j].b; |
| break; |
| } |
| } |
| if (uuid_bin) { |
| uuid_bin_to_str(uuid_bin, uuid, UUID_STR_FORMAT_GUID); |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",uuid=%s", uuid); |
| } |
| |
| offset += snprintf(buf + offset, buflen - offset, ";"); |
| } |
| |
| if (offset) { |
| offset += snprintf(buf + offset, buflen - offset, "\""); |
| log_debug("\ncmd: %s\n", buf); |
| if (run_command(buf, 0)) { |
| stm32prog_err("GPT partitionning fail: %s", |
| buf); |
| free(buf); |
| |
| return -1; |
| } |
| } |
| |
| if (data->dev[i].mmc) |
| part_init(mmc_get_blk_desc(data->dev[i].mmc)); |
| |
| #ifdef DEBUG |
| sprintf(buf, "gpt verify mmc %d", data->dev[i].dev_id); |
| log_debug("\ncmd: %s", buf); |
| if (run_command(buf, 0)) |
| printf("fail !\n"); |
| else |
| printf("OK\n"); |
| |
| sprintf(buf, "part list mmc %d", data->dev[i].dev_id); |
| run_command(buf, 0); |
| #endif |
| puts("done\n"); |
| } |
| |
| #ifdef DEBUG |
| run_command("mtd list", 0); |
| #endif |
| free(buf); |
| |
| return 0; |
| } |
| |
| static int stm32prog_alt_add(struct stm32prog_data *data, |
| struct dfu_entity *dfu, |
| struct stm32prog_part_t *part) |
| { |
| int ret = 0; |
| int offset = 0; |
| char devstr[10]; |
| char dfustr[10]; |
| char buf[ALT_BUF_LEN]; |
| u32 size; |
| char multiplier, type; |
| |
| /* max 3 digit for sector size */ |
| if (part->size > SZ_1M) { |
| size = (u32)(part->size / SZ_1M); |
| multiplier = 'M'; |
| } else if (part->size > SZ_1K) { |
| size = (u32)(part->size / SZ_1K); |
| multiplier = 'K'; |
| } else { |
| size = (u32)part->size; |
| multiplier = 'B'; |
| } |
| if (IS_SELECT(part) && !IS_EMPTY(part)) |
| type = 'e'; /*Readable and Writeable*/ |
| else |
| type = 'a';/*Readable*/ |
| |
| memset(buf, 0, sizeof(buf)); |
| offset = snprintf(buf, ALT_BUF_LEN - offset, |
| "@%s/0x%02x/1*%d%c%c ", |
| part->name, part->id, |
| size, multiplier, type); |
| |
| if (part->target == STM32PROG_RAM) { |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| "ram 0x%llx 0x%llx", |
| part->addr, part->size); |
| } else if (part->part_type == RAW_IMAGE) { |
| u64 dfu_size; |
| |
| if (part->dev->target == STM32PROG_MMC) |
| dfu_size = part->size / part->dev->mmc->read_bl_len; |
| else |
| dfu_size = part->size; |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| "raw 0x0 0x%llx", dfu_size); |
| } else if (part->part_id < 0) { |
| u64 nb_blk = part->size / part->dev->mmc->read_bl_len; |
| |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| "raw 0x%llx 0x%llx", |
| part->addr, nb_blk); |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| " mmcpart %d", -(part->part_id)); |
| } else { |
| if (part->part_type == PART_SYSTEM && |
| (part->target == STM32PROG_NAND || |
| part->target == STM32PROG_NOR || |
| part->target == STM32PROG_SPI_NAND)) |
| offset += snprintf(buf + offset, |
| ALT_BUF_LEN - offset, |
| "partubi"); |
| else |
| offset += snprintf(buf + offset, |
| ALT_BUF_LEN - offset, |
| "part"); |
| /* dev_id requested by DFU MMC */ |
| if (part->target == STM32PROG_MMC) |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| " %d", part->dev_id); |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| " %d", part->part_id); |
| } |
| ret = -ENODEV; |
| switch (part->target) { |
| case STM32PROG_MMC: |
| if (IS_ENABLED(CONFIG_MMC)) { |
| ret = 0; |
| sprintf(dfustr, "mmc"); |
| sprintf(devstr, "%d", part->dev_id); |
| } |
| break; |
| case STM32PROG_NAND: |
| case STM32PROG_NOR: |
| case STM32PROG_SPI_NAND: |
| if (IS_ENABLED(CONFIG_MTD)) { |
| ret = 0; |
| sprintf(dfustr, "mtd"); |
| get_mtd_by_target(devstr, part->target, part->dev_id); |
| } |
| break; |
| case STM32PROG_RAM: |
| ret = 0; |
| sprintf(dfustr, "ram"); |
| sprintf(devstr, "0"); |
| break; |
| default: |
| break; |
| } |
| if (ret) { |
| stm32prog_err("invalid target: %d", part->target); |
| return ret; |
| } |
| log_debug("dfu_alt_add(%s,%s,%s)\n", dfustr, devstr, buf); |
| ret = dfu_alt_add(dfu, dfustr, devstr, buf); |
| log_debug("dfu_alt_add(%s,%s,%s) result %d\n", |
| dfustr, devstr, buf, ret); |
| |
| return ret; |
| } |
| |
| static int stm32prog_alt_add_virt(struct dfu_entity *dfu, |
| char *name, int phase, int size) |
| { |
| int ret = 0; |
| char devstr[4]; |
| char buf[ALT_BUF_LEN]; |
| |
| sprintf(devstr, "%d", phase); |
| sprintf(buf, "@%s/0x%02x/1*%dBe", name, phase, size); |
| ret = dfu_alt_add(dfu, "virt", devstr, buf); |
| log_debug("dfu_alt_add(virt,%s,%s) result %d\n", devstr, buf, ret); |
| |
| return ret; |
| } |
| |
| static int dfu_init_entities(struct stm32prog_data *data) |
| { |
| int ret = 0; |
| int phase, i, alt_id; |
| struct stm32prog_part_t *part; |
| struct dfu_entity *dfu; |
| int alt_nb; |
| u32 otp_size = 0; |
| |
| alt_nb = 1; /* number of virtual = CMD*/ |
| |
| if (IS_ENABLED(CONFIG_CMD_STM32PROG_OTP)) { |
| /* OTP_SIZE_SMC = 0 if SMC is not supported */ |
| otp_size = OTP_SIZE_SMC; |
| /* check if PTA BSEC is supported */ |
| ret = optee_ta_open(data); |
| log_debug("optee_ta_open(PTA_NVMEM) result %d\n", ret); |
| if (!ret && data->tee) |
| otp_size = OTP_SIZE_TA; |
| if (otp_size) |
| alt_nb++; /* OTP*/ |
| } |
| |
| if (CONFIG_IS_ENABLED(DM_PMIC)) |
| alt_nb++; /* PMIC NVMEM*/ |
| |
| if (data->part_nb == 0) |
| alt_nb++; /* +1 for FlashLayout */ |
| else |
| for (i = 0; i < data->part_nb; i++) { |
| if (data->part_array[i].target != STM32PROG_NONE) |
| alt_nb++; |
| } |
| |
| if (dfu_alt_init(alt_nb, &dfu)) |
| return -ENODEV; |
| |
| puts("DFU alt info setting: "); |
| if (data->part_nb) { |
| alt_id = 0; |
| ret = 0; |
| for (phase = 1; |
| (phase <= PHASE_LAST_USER) && |
| (alt_id < alt_nb) && !ret; |
| phase++) { |
| /* ordering alt setting by phase id */ |
| part = NULL; |
| for (i = 0; i < data->part_nb; i++) { |
| if (phase == data->part_array[i].id) { |
| part = &data->part_array[i]; |
| break; |
| } |
| } |
| if (!part) |
| continue; |
| if (part->target == STM32PROG_NONE) |
| continue; |
| part->alt_id = alt_id; |
| alt_id++; |
| |
| ret = stm32prog_alt_add(data, dfu, part); |
| } |
| } else { |
| char buf[ALT_BUF_LEN]; |
| |
| sprintf(buf, "@FlashLayout/0x%02x/1*256Ke ram %x 40000", |
| PHASE_FLASHLAYOUT, CONFIG_SYS_LOAD_ADDR); |
| ret = dfu_alt_add(dfu, "ram", NULL, buf); |
| log_debug("dfu_alt_add(ram, NULL,%s) result %d\n", buf, ret); |
| } |
| |
| if (!ret) |
| ret = stm32prog_alt_add_virt(dfu, "virtual", PHASE_CMD, CMD_SIZE); |
| |
| if (!ret && IS_ENABLED(CONFIG_CMD_STM32PROG_OTP) && otp_size) |
| ret = stm32prog_alt_add_virt(dfu, "OTP", PHASE_OTP, otp_size); |
| |
| if (!ret && CONFIG_IS_ENABLED(DM_PMIC)) |
| ret = stm32prog_alt_add_virt(dfu, "PMIC", PHASE_PMIC, PMIC_SIZE); |
| |
| if (ret) |
| stm32prog_err("dfu init failed: %d", ret); |
| puts("done\n"); |
| |
| #ifdef DEBUG |
| dfu_show_entities(); |
| #endif |
| return ret; |
| } |
| |
| int stm32prog_otp_write(struct stm32prog_data *data, u32 offset, u8 *buffer, |
| long *size) |
| { |
| u32 otp_size = data->tee ? OTP_SIZE_TA : OTP_SIZE_SMC; |
| log_debug("%s: %x %lx\n", __func__, offset, *size); |
| |
| if (!IS_ENABLED(CONFIG_CMD_STM32PROG_OTP)) { |
| stm32prog_err("OTP update not supported"); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| if (!data->otp_part) { |
| data->otp_part = memalign(CONFIG_SYS_CACHELINE_SIZE, otp_size); |
| if (!data->otp_part) |
| return -ENOMEM; |
| } |
| |
| if (!offset) |
| memset(data->otp_part, 0, otp_size); |
| |
| if (offset + *size > otp_size) |
| *size = otp_size - offset; |
| |
| memcpy((void *)((uintptr_t)data->otp_part + offset), buffer, *size); |
| |
| return 0; |
| } |
| |
| int stm32prog_otp_read(struct stm32prog_data *data, u32 offset, u8 *buffer, |
| long *size) |
| { |
| u32 otp_size = data->tee ? OTP_SIZE_TA : OTP_SIZE_SMC; |
| int result = 0; |
| |
| if (!IS_ENABLED(CONFIG_CMD_STM32PROG_OTP)) { |
| stm32prog_err("OTP update not supported"); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| log_debug("%s: %x %lx\n", __func__, offset, *size); |
| /* alway read for first packet */ |
| if (!offset) { |
| if (!data->otp_part) |
| data->otp_part = |
| memalign(CONFIG_SYS_CACHELINE_SIZE, otp_size); |
| |
| if (!data->otp_part) { |
| result = -ENOMEM; |
| goto end_otp_read; |
| } |
| |
| /* init struct with 0 */ |
| memset(data->otp_part, 0, otp_size); |
| |
| /* call the service */ |
| result = -EOPNOTSUPP; |
| if (data->tee && CONFIG_IS_ENABLED(OPTEE)) |
| result = optee_ta_invoke(data, TA_NVMEM_READ, NVMEM_OTP, |
| data->otp_part, OTP_SIZE_TA); |
| else if (IS_ENABLED(CONFIG_ARM_SMCCC)) |
| result = stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_READ_ALL, |
| (unsigned long)data->otp_part, 0); |
| if (result) |
| goto end_otp_read; |
| } |
| |
| if (!data->otp_part) { |
| result = -ENOMEM; |
| goto end_otp_read; |
| } |
| |
| if (offset + *size > otp_size) |
| *size = otp_size - offset; |
| memcpy(buffer, (void *)((uintptr_t)data->otp_part + offset), *size); |
| |
| end_otp_read: |
| log_debug("%s: result %i\n", __func__, result); |
| |
| return result; |
| } |
| |
| int stm32prog_otp_start(struct stm32prog_data *data) |
| { |
| int result = 0; |
| struct arm_smccc_res res; |
| |
| if (!IS_ENABLED(CONFIG_CMD_STM32PROG_OTP)) { |
| stm32prog_err("OTP update not supported"); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| if (!data->otp_part) { |
| stm32prog_err("start OTP without data"); |
| return -1; |
| } |
| |
| result = -EOPNOTSUPP; |
| if (data->tee && CONFIG_IS_ENABLED(OPTEE)) { |
| result = optee_ta_invoke(data, TA_NVMEM_WRITE, NVMEM_OTP, |
| data->otp_part, OTP_SIZE_TA); |
| } else if (IS_ENABLED(CONFIG_ARM_SMCCC)) { |
| arm_smccc_smc(STM32_SMC_BSEC, STM32_SMC_WRITE_ALL, |
| (uintptr_t)data->otp_part, 0, 0, 0, 0, 0, &res); |
| |
| if (!res.a0) { |
| switch (res.a1) { |
| case 0: |
| result = 0; |
| break; |
| case 1: |
| stm32prog_err("Provisioning"); |
| result = 0; |
| break; |
| default: |
| log_err("%s: OTP incorrect value (err = %ld)\n", |
| __func__, res.a1); |
| result = -EINVAL; |
| break; |
| } |
| } else { |
| log_err("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n", |
| __func__, STM32_SMC_BSEC, STM32_SMC_WRITE_ALL, res.a0); |
| result = -EINVAL; |
| } |
| } |
| |
| free(data->otp_part); |
| data->otp_part = NULL; |
| log_debug("%s: result %i\n", __func__, result); |
| |
| return result; |
| } |
| |
| int stm32prog_pmic_write(struct stm32prog_data *data, u32 offset, u8 *buffer, |
| long *size) |
| { |
| log_debug("%s: %x %lx\n", __func__, offset, *size); |
| |
| if (!offset) |
| memset(data->pmic_part, 0, PMIC_SIZE); |
| |
| if (offset + *size > PMIC_SIZE) |
| *size = PMIC_SIZE - offset; |
| |
| memcpy(&data->pmic_part[offset], buffer, *size); |
| |
| return 0; |
| } |
| |
| int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset, u8 *buffer, |
| long *size) |
| { |
| int result = 0, ret; |
| struct udevice *dev; |
| |
| if (!IS_ENABLED(CONFIG_PMIC_STPMIC1)) { |
| stm32prog_err("PMIC update not supported"); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| log_debug("%s: %x %lx\n", __func__, offset, *size); |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| |
| /* alway request PMIC for first packet */ |
| if (!offset) { |
| /* init struct with 0 */ |
| memset(data->pmic_part, 0, PMIC_SIZE); |
| |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| |
| ret = misc_read(dev, 0xF8, data->pmic_part, PMIC_SIZE); |
| if (ret < 0) { |
| result = ret; |
| goto end_pmic_read; |
| } |
| if (ret != PMIC_SIZE) { |
| result = -EACCES; |
| goto end_pmic_read; |
| } |
| } |
| |
| if (offset + *size > PMIC_SIZE) |
| *size = PMIC_SIZE - offset; |
| |
| memcpy(buffer, &data->pmic_part[offset], *size); |
| |
| end_pmic_read: |
| log_debug("%s: result %i\n", __func__, result); |
| return result; |
| } |
| |
| int stm32prog_pmic_start(struct stm32prog_data *data) |
| { |
| int ret; |
| struct udevice *dev; |
| |
| if (!IS_ENABLED(CONFIG_PMIC_STPMIC1)) { |
| stm32prog_err("PMIC update not supported"); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| |
| return misc_write(dev, 0xF8, data->pmic_part, PMIC_SIZE); |
| } |
| |
| /* copy FSBL on NAND to improve reliability on NAND */ |
| static int stm32prog_copy_fsbl(struct stm32prog_part_t *part) |
| { |
| int ret, i; |
| void *fsbl; |
| struct image_header_s header; |
| struct stm32_header_v2 raw_header; /* V2 size > v1 size */ |
| struct dfu_entity *dfu; |
| long size, offset; |
| |
| if (part->target != STM32PROG_NAND && |
| part->target != STM32PROG_SPI_NAND) |
| return -EINVAL; |
| |
| dfu = dfu_get_entity(part->alt_id); |
| |
| /* read header */ |
| dfu_transaction_cleanup(dfu); |
| size = sizeof(raw_header); |
| ret = dfu->read_medium(dfu, 0, (void *)&raw_header, &size); |
| if (ret) |
| return ret; |
| |
| stm32prog_header_check((ulong)&raw_header, &header); |
| if (header.type != HEADER_STM32IMAGE && |
| header.type != HEADER_STM32IMAGE_V2) |
| return -ENOENT; |
| |
| /* read header + payload */ |
| size = header.image_length + header.length; |
| size = round_up(size, part->dev->mtd->erasesize); |
| fsbl = calloc(1, size); |
| if (!fsbl) |
| return -ENOMEM; |
| ret = dfu->read_medium(dfu, 0, fsbl, &size); |
| log_debug("%s read size=%lx ret=%d\n", __func__, size, ret); |
| if (ret) |
| goto error; |
| |
| dfu_transaction_cleanup(dfu); |
| offset = 0; |
| for (i = part->bin_nb - 1; i > 0; i--) { |
| offset += size; |
| /* write to the next erase block */ |
| ret = dfu->write_medium(dfu, offset, fsbl, &size); |
| log_debug("%s copy at ofset=%lx size=%lx ret=%d", |
| __func__, offset, size, ret); |
| if (ret) |
| goto error; |
| } |
| |
| error: |
| free(fsbl); |
| return ret; |
| } |
| |
| static void stm32prog_end_phase(struct stm32prog_data *data, u64 offset) |
| { |
| if (data->phase == PHASE_FLASHLAYOUT) { |
| #if defined(CONFIG_LEGACY_IMAGE_FORMAT) |
| if (genimg_get_format((void *)CONFIG_SYS_LOAD_ADDR) == IMAGE_FORMAT_LEGACY) { |
| data->script = CONFIG_SYS_LOAD_ADDR; |
| data->phase = PHASE_END; |
| log_notice("U-Boot script received\n"); |
| return; |
| } |
| #endif |
| log_notice("\nFlashLayout received, size = %lld\n", offset); |
| if (parse_flash_layout(data, CONFIG_SYS_LOAD_ADDR, offset)) |
| stm32prog_err("Layout: invalid FlashLayout"); |
| return; |
| } |
| |
| if (!data->cur_part) |
| return; |
| |
| if (data->cur_part->target == STM32PROG_RAM) { |
| if (data->cur_part->part_type == PART_SYSTEM) |
| data->uimage = data->cur_part->addr; |
| if (data->cur_part->part_type == PART_FILESYSTEM) |
| data->dtb = data->cur_part->addr; |
| if (data->cur_part->part_type == PART_BINARY) { |
| data->initrd = data->cur_part->addr; |
| data->initrd_size = offset; |
| } |
| } |
| |
| if (CONFIG_IS_ENABLED(MMC) && |
| data->cur_part->part_id < 0) { |
| char cmdbuf[60]; |
| |
| sprintf(cmdbuf, "mmc bootbus %d 0 0 0; mmc partconf %d 1 %d 0", |
| data->cur_part->dev_id, data->cur_part->dev_id, |
| -(data->cur_part->part_id)); |
| if (run_command(cmdbuf, 0)) { |
| stm32prog_err("commands '%s' failed", cmdbuf); |
| return; |
| } |
| } |
| |
| if (IS_ENABLED(CONFIG_MTD) && |
| data->cur_part->bin_nb > 1) { |
| if (stm32prog_copy_fsbl(data->cur_part)) { |
| stm32prog_err("%s (0x%x): copy of fsbl failed", |
| data->cur_part->name, data->cur_part->id); |
| return; |
| } |
| } |
| } |
| |
| void stm32prog_do_reset(struct stm32prog_data *data) |
| { |
| if (data->phase == PHASE_RESET) { |
| data->phase = PHASE_DO_RESET; |
| puts("Reset requested\n"); |
| } |
| } |
| |
| void stm32prog_next_phase(struct stm32prog_data *data) |
| { |
| int phase, i; |
| struct stm32prog_part_t *part; |
| bool found; |
| |
| phase = data->phase; |
| switch (phase) { |
| case PHASE_RESET: |
| case PHASE_END: |
| case PHASE_DO_RESET: |
| return; |
| } |
| |
| /* found next selected partition */ |
| data->dfu_seq = 0; |
| data->cur_part = NULL; |
| data->phase = PHASE_END; |
| found = false; |
| do { |
| phase++; |
| if (phase > PHASE_LAST_USER) |
| break; |
| for (i = 0; i < data->part_nb; i++) { |
| part = &data->part_array[i]; |
| if (part->id == phase) { |
| if (IS_SELECT(part) && !IS_EMPTY(part)) { |
| data->cur_part = part; |
| data->phase = phase; |
| found = true; |
| } |
| break; |
| } |
| } |
| } while (!found); |
| |
| if (data->phase == PHASE_END) |
| puts("Phase=END\n"); |
| } |
| |
| static int part_delete(struct stm32prog_data *data, |
| struct stm32prog_part_t *part) |
| { |
| int ret = 0; |
| unsigned long blks, blks_offset, blks_size; |
| struct blk_desc *block_dev = NULL; |
| char cmdbuf[40]; |
| char devstr[10]; |
| |
| printf("Erasing %s ", part->name); |
| switch (part->target) { |
| case STM32PROG_MMC: |
| if (!IS_ENABLED(CONFIG_MMC)) { |
| ret = -1; |
| stm32prog_err("%s (0x%x): erase invalid", |
| part->name, part->id); |
| break; |
| } |
| printf("on mmc %d: ", part->dev->dev_id); |
| block_dev = mmc_get_blk_desc(part->dev->mmc); |
| blks_offset = lldiv(part->addr, part->dev->mmc->read_bl_len); |
| blks_size = lldiv(part->size, part->dev->mmc->read_bl_len); |
| /* -1 or -2 : delete boot partition of MMC |
| * need to switch to associated hwpart 1 or 2 |
| */ |
| if (part->part_id < 0) |
| if (blk_select_hwpart_devnum(UCLASS_MMC, |
| part->dev->dev_id, |
| -part->part_id)) |
| return -1; |
| |
| blks = blk_derase(block_dev, blks_offset, blks_size); |
| |
| /* return to user partition */ |
| if (part->part_id < 0) |
| blk_select_hwpart_devnum(UCLASS_MMC, |
| part->dev->dev_id, 0); |
| if (blks != blks_size) { |
| ret = -1; |
| stm32prog_err("%s (0x%x): MMC erase failed", |
| part->name, part->id); |
| } |
| break; |
| case STM32PROG_NOR: |
| case STM32PROG_NAND: |
| case STM32PROG_SPI_NAND: |
| if (!IS_ENABLED(CONFIG_MTD)) { |
| ret = -1; |
| stm32prog_err("%s (0x%x): erase invalid", |
| part->name, part->id); |
| break; |
| } |
| get_mtd_by_target(devstr, part->target, part->dev->dev_id); |
| printf("on %s: ", devstr); |
| sprintf(cmdbuf, "mtd erase %s 0x%llx 0x%llx", |
| devstr, part->addr, part->size); |
| if (run_command(cmdbuf, 0)) { |
| ret = -1; |
| stm32prog_err("%s (0x%x): MTD erase commands failed (%s)", |
| part->name, part->id, cmdbuf); |
| } |
| break; |
| case STM32PROG_RAM: |
| printf("on ram: "); |
| memset((void *)(uintptr_t)part->addr, 0, (size_t)part->size); |
| break; |
| default: |
| ret = -1; |
| stm32prog_err("%s (0x%x): erase invalid", part->name, part->id); |
| break; |
| } |
| if (!ret) |
| printf("done\n"); |
| |
| return ret; |
| } |
| |
| static void stm32prog_devices_init(struct stm32prog_data *data) |
| { |
| int i; |
| int ret; |
| struct stm32prog_part_t *part; |
| |
| ret = treat_partition_list(data); |
| if (ret) |
| goto error; |
| |
| /* empty flashlayout */ |
| if (!data->dev_nb) |
| return; |
| |
| /* initialize the selected device */ |
| for (i = 0; i < data->dev_nb; i++) { |
| ret = init_device(data, &data->dev[i]); |
| if (ret) |
| goto error; |
| } |
| |
| /* delete RAW partition before create partition */ |
| for (i = 0; i < data->part_nb; i++) { |
| part = &data->part_array[i]; |
| |
| if (part->part_type != RAW_IMAGE) |
| continue; |
| |
| if (!IS_SELECT(part) || !IS_DELETE(part)) |
| continue; |
| |
| ret = part_delete(data, part); |
| if (ret) |
| goto error; |
| } |
| |
| if (IS_ENABLED(CONFIG_MMC)) { |
| ret = create_gpt_partitions(data); |
| if (ret) |
| goto error; |
| } |
| |
| /* delete partition GPT or MTD */ |
| for (i = 0; i < data->part_nb; i++) { |
| part = &data->part_array[i]; |
| |
| if (part->part_type == RAW_IMAGE) |
| continue; |
| |
| if (!IS_SELECT(part) || !IS_DELETE(part)) |
| continue; |
| |
| ret = part_delete(data, part); |
| if (ret) |
| goto error; |
| } |
| |
| return; |
| |
| error: |
| data->part_nb = 0; |
| } |
| |
| int stm32prog_dfu_init(struct stm32prog_data *data) |
| { |
| /* init device if no error */ |
| if (data->part_nb) |
| stm32prog_devices_init(data); |
| |
| if (data->part_nb) |
| stm32prog_next_phase(data); |
| |
| /* prepare DFU for device read/write */ |
| dfu_free_entities(); |
| return dfu_init_entities(data); |
| } |
| |
| int stm32prog_init(struct stm32prog_data *data, uintptr_t addr, ulong size) |
| { |
| memset(data, 0x0, sizeof(*data)); |
| data->read_phase = PHASE_RESET; |
| data->phase = PHASE_FLASHLAYOUT; |
| |
| return parse_flash_layout(data, addr, size); |
| } |
| |
| void stm32prog_clean(struct stm32prog_data *data) |
| { |
| /* clean */ |
| dfu_free_entities(); |
| free(data->part_array); |
| free(data->otp_part); |
| free(data->buffer); |
| |
| if (CONFIG_IS_ENABLED(OPTEE) && data->tee) { |
| tee_close_session(data->tee, data->tee_session); |
| data->tee = NULL; |
| data->tee_session = 0x0; |
| } |
| } |
| |
| /* DFU callback: used after serial and direct DFU USB access */ |
| void dfu_flush_callback(struct dfu_entity *dfu) |
| { |
| if (!stm32prog_data) |
| return; |
| |
| if (dfu->dev_type == DFU_DEV_VIRT) { |
| if (dfu->data.virt.dev_num == PHASE_OTP) |
| stm32prog_otp_start(stm32prog_data); |
| else if (dfu->data.virt.dev_num == PHASE_PMIC) |
| stm32prog_pmic_start(stm32prog_data); |
| return; |
| } |
| |
| if (dfu->dev_type == DFU_DEV_RAM) { |
| if (dfu->alt == 0 && |
| stm32prog_data->phase == PHASE_FLASHLAYOUT) { |
| stm32prog_end_phase(stm32prog_data, dfu->offset); |
| /* waiting DFU DETACH for reenumeration */ |
| } |
| } |
| |
| if (!stm32prog_data->cur_part) |
| return; |
| |
| if (dfu->alt == stm32prog_data->cur_part->alt_id) { |
| stm32prog_end_phase(stm32prog_data, dfu->offset); |
| stm32prog_next_phase(stm32prog_data); |
| } |
| } |
| |
| void dfu_initiated_callback(struct dfu_entity *dfu) |
| { |
| if (!stm32prog_data) |
| return; |
| |
| if (!stm32prog_data->cur_part) |
| return; |
| |
| /* force the saved offset for the current partition */ |
| if (dfu->alt == stm32prog_data->cur_part->alt_id) { |
| dfu->offset = stm32prog_data->offset; |
| stm32prog_data->dfu_seq = 0; |
| log_debug("dfu offset = 0x%llx\n", dfu->offset); |
| } |
| } |
| |
| void dfu_error_callback(struct dfu_entity *dfu, const char *msg) |
| { |
| struct stm32prog_data *data = stm32prog_data; |
| |
| if (!stm32prog_data) |
| return; |
| |
| if (!stm32prog_data->cur_part) |
| return; |
| |
| if (dfu->alt == stm32prog_data->cur_part->alt_id) |
| stm32prog_err(msg); |
| } |