tools/Makefile - github/trini/u-boot - Gitiles

 # SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

 # A note on target vs host configuration:
 #
 # Host tools can be used across multiple targets, or different configurations
 # of the same target. Thus, host tools must be able to handle any combination
 # of target configurations. To prevent having different variations of the same
 # tool, the tool build options may not depend on target configuration.
 #
 # Some linux distributions package these utilities as u-boot-tools, and it
 # would be unmaintainable to have a different tool variation for each
 # arch or configuration.
 #
 # A couple of simple rules:
 #
 # 1) Do not use target CONFIG_* options to enable or disable features in host
 #    tools. Only use the configs from tools/Kconfig
 # 2) It's okay to use target configs to disable building specific tools.
 #    That's as long as the features of those tools aren't modified.
 #

 # Enable all the config-independent tools
 ifneq ($(HOST_TOOLS_ALL),)
 CONFIG_ARCH_KIRKWOOD = y
 CONFIG_LCD_LOGO = y
 CONFIG_CMD_LOADS = y
 CONFIG_CMD_NET = y
 CONFIG_XWAY_SWAP_BYTES = y
 CONFIG_NETCONSOLE = y
 CONFIG_SHA1_CHECK_UB_IMG = y
 CONFIG_ARCH_SUNXI = y
 endif

 subdir-$(HOST_TOOLS_ALL) += gdb

 # Merge all the different vars for envcrc into one
 ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
 ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y
 ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y
 ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y
 ENVCRC-$(CONFIG_ENV_IS_IN_NAND) = y
 ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y
 ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y
 CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y)

 hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params

 hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo
 hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
 HOSTCFLAGS_bmp_logo.o := -pedantic

 hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
 envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o

 hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
 HOSTCFLAGS_gen_eth_addr.o := -pedantic

 hostprogs-$(CONFIG_CMD_NET) += gen_ethaddr_crc
 gen_ethaddr_crc-objs := gen_ethaddr_crc.o lib/crc8.o
 HOSTCFLAGS_gen_ethaddr_crc.o := -pedantic

 hostprogs-$(CONFIG_CMD_LOADS) += img2srec
 HOSTCFLAGS_img2srec.o := -pedantic

 hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
 HOSTCFLAGS_xway-swap-bytes.o := -pedantic

 hostprogs-y += mkenvimage
 mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o

 hostprogs-y += dumpimage mkimage
 hostprogs-$(CONFIG_TOOLS_LIBCRYPTO) += fit_info fit_check_sign

 hostprogs-$(CONFIG_CMD_BOOTEFI_SELFTEST) += file2include

 FIT_OBJS-y := fit_common.o fit_image.o image-host.o boot/image-fit.o
 FIT_SIG_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := image-sig-host.o boot/image-fit-sig.o
 FIT_CIPHER_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := boot/image-cipher.o

 # The following files are synced with upstream DTC.
 # Use synced versions from scripts/dtc/libfdt/.
 LIBFDT_OBJS := $(addprefix libfdt/, fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o \
 		fdt_strerror.o fdt_empty_tree.o fdt_addresses.o fdt_overlay.o)

 RSA_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/rsa/, \
 					rsa-sign.o rsa-verify.o \
 					rsa-mod-exp.o)

 ECDSA_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/ecdsa/, ecdsa-libcrypto.o)

 AES_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/aes/, \
 					aes-encrypt.o aes-decrypt.o)

 # Cryptographic helpers and image types that depend on openssl/libcrypto
 LIBCRYPTO_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := \
 			lib/fdt-libcrypto.o \
 			sunxi_toc0.o

 ROCKCHIP_OBS = lib/rc4.o rkcommon.o rkimage.o rksd.o rkspi.o

 # common objs for dumpimage and mkimage
 dumpimage-mkimage-objs := aisimage.o \
 			atmelimage.o \
 			$(FIT_OBJS-y) \
 			$(FIT_SIG_OBJS-y) \
 			$(FIT_CIPHER_OBJS-y) \
 			boot/fdt_region.o \
 			boot/bootm.o \
 			lib/crc32.o \
 			default_image.o \
 			lib/fdtdec_common.o \
 			lib/fdtdec.o \
 			boot/image.o \
 			boot/image-host.o \
 			imagetool.o \
 			imximage.o \
 			imx8image.o \
 			imx8mimage.o \
 			kwbimage.o \
 			lib/md5.o \
 			lpc32xximage.o \
 			mxsimage.o \
 			omapimage.o \
 			os_support.o \
 			pblimage.o \
 			pbl_crc32.o \
 			vybridimage.o \
 			stm32image.o \
 			$(ROCKCHIP_OBS) \
 			socfpgaimage.o \
 			sunxi_egon.o \
 			lib/crc16-ccitt.o \
 			lib/hash-checksum.o \
 			lib/sha1.o \
 			lib/sha256.o \
 			lib/sha512.o \
 			common/hash.o \
 			ublimage.o \
 			zynqimage.o \
 			zynqmpimage.o \
 			zynqmpbif.o \
 			$(LIBCRYPTO_OBJS-y) \
 			$(LIBFDT_OBJS) \
 			gpimage.o \
 			gpimage-common.o \
 			mtk_image.o \
 			$(ECDSA_OBJS-y) \
 			$(RSA_OBJS-y) \
 			$(AES_OBJS-y)

 dumpimage-objs := $(dumpimage-mkimage-objs) dumpimage.o
 mkimage-objs   := $(dumpimage-mkimage-objs) mkimage.o
 fit_info-objs   := $(dumpimage-mkimage-objs) fit_info.o
 fit_check_sign-objs   := $(dumpimage-mkimage-objs) fit_check_sign.o
 file2include-objs := file2include.o

 ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_TOOLS_LIBCRYPTO),)
 # Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
 # the mxsimage support within tools/mxsimage.c .
 HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
 endif

 ifdef CONFIG_TOOLS_LIBCRYPTO
 # This affects include/image.h, but including the board config file
 # is tricky, so manually define this options here.
 HOST_EXTRACFLAGS	+= -DCONFIG_FIT_SIGNATURE
 HOST_EXTRACFLAGS	+= -DCONFIG_FIT_SIGNATURE_MAX_SIZE=0xffffffff
 HOST_EXTRACFLAGS	+= -DCONFIG_FIT_CIPHER
 endif

 # MXSImage needs LibSSL
 ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_TOOLS_LIBCRYPTO),)
 HOSTCFLAGS_kwbimage.o += \
 	$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
 HOSTLDLIBS_mkimage += \
 	$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")

 # OS X deprecate openssl in favour of CommonCrypto, supress deprecation
 # warnings on those systems
 ifeq ($(HOSTOS),darwin)
 HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations
 HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations
 HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations
 endif
 endif

 HOSTCFLAGS_fit_image.o += -DMKIMAGE_DTC=\"$(CONFIG_MKIMAGE_DTC_PATH)\"

 HOSTLDLIBS_dumpimage := $(HOSTLDLIBS_mkimage)
 HOSTLDLIBS_fit_info := $(HOSTLDLIBS_mkimage)
 HOSTLDLIBS_fit_check_sign := $(HOSTLDLIBS_mkimage)

 hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl
 hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
 HOSTCFLAGS_mkexynosspl.o := -pedantic

 HOSTCFLAGS_kwboot.o += -pthread
 HOSTLDLIBS_kwboot += -pthread -ltinfo

 ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
 hostprogs-$(CONFIG_X86) += ifdtool

 ifwitool-objs := ifwitool.o
 hostprogs-$(CONFIG_X86)$(CONFIG_SANDBOX) += ifwitool

 hostprogs-$(CONFIG_MX23) += mxsboot
 hostprogs-$(CONFIG_MX28) += mxsboot
 HOSTCFLAGS_mxsboot.o := -pedantic

 hostprogs-$(CONFIG_ARCH_SUNXI) += mksunxiboot
 hostprogs-$(CONFIG_ARCH_SUNXI) += sunxi-spl-image-builder
 sunxi-spl-image-builder-objs := sunxi-spl-image-builder.o lib/bch.o

 hostprogs-$(CONFIG_NETCONSOLE) += ncb
 hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1

 ubsha1-objs := os_support.o ubsha1.o lib/sha1.o

 HOSTCFLAGS_ubsha1.o := -pedantic

 hostprogs-$(CONFIG_ARCH_KIRKWOOD) += kwboot
 hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot
 hostprogs-y += proftool
 hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela
 hostprogs-$(CONFIG_RISCV) += prelink-riscv

 hostprogs-$(CONFIG_ARCH_OCTEON) += update_octeon_header
 update_octeon_header-objs := update_octeon_header.o lib/crc32.o

 hostprogs-y += fdtgrep
 fdtgrep-objs += $(LIBFDT_OBJS) boot/fdt_region.o fdtgrep.o

 ifneq ($(TOOLS_ONLY),y)
 hostprogs-y += spl_size_limit
 endif

 hostprogs-$(CONFIG_MIPS) += mips-relocs

 hostprogs-$(CONFIG_ASN1_COMPILER)	+= asn1_compiler
 HOSTCFLAGS_asn1_compiler.o = -idirafter $(srctree)/include

 HOSTCFLAGS_mkeficapsule.o += \
 	$(shell pkg-config --cflags gnutls uuid 2> /dev/null || echo "")
 HOSTLDLIBS_mkeficapsule += \
 	$(shell pkg-config --libs gnutls uuid 2> /dev/null || echo "-lgnutls -luuid")
 hostprogs-$(CONFIG_TOOLS_MKEFICAPSULE) += mkeficapsule

 # We build some files with extra pedantic flags to try to minimize things
 # that won't build on some weird host compiler -- though there are lots of
 # exceptions for files that aren't complaint.
 HOSTCFLAGS_crc32.o := -pedantic
 HOSTCFLAGS_crc8.o := -pedantic
 HOSTCFLAGS_md5.o := -pedantic
 HOSTCFLAGS_sha1.o := -pedantic
 HOSTCFLAGS_sha256.o := -pedantic
 HOSTCFLAGS_sha512.o := -pedantic -DCONFIG_SHA512 -DCONFIG_SHA384

 quiet_cmd_wrap = WRAP    $@
 cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@

 $(obj)/boot/%.c $(obj)/common/%.c $(obj)/env/%.c $(obj)/lib/%.c:
 	$(call cmd,wrap)

 clean-dirs := lib common

 always := $(hostprogs-y)

 # Generated LCD/video logo
 LOGO_H = $(objtree)/include/bmp_logo.h
 LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
 LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_H)
 LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_DATA_H)
 LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_H)
 LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_DATA_H)

 # Generic logo
 ifeq ($(LOGO_BMP),)
 LOGO_BMP= $(srctree)/$(src)/logos/denx.bmp

 # Use board logo and fallback to vendor
 ifneq ($(wildcard $(srctree)/$(src)/logos/$(BOARD).bmp),)
 LOGO_BMP= $(srctree)/$(src)/logos/$(BOARD).bmp
 else
 ifneq ($(wildcard $(srctree)/$(src)/logos/$(VENDOR).bmp),)
 LOGO_BMP= $(srctree)/$(src)/logos/$(VENDOR).bmp
 endif
 endif

 endif # !LOGO_BMP

 #
 # Use native tools and options
 # Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
 # Define _GNU_SOURCE to obtain the getline prototype from stdio.h
 #
 HOST_EXTRACFLAGS += -include $(srctree)/include/compiler.h \
 		$(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \
 		-I$(srctree)/scripts/dtc/libfdt \
 		-I$(srctree)/tools \
 		-DUSE_HOSTCC \
 		-D__KERNEL_STRICT_NAMES \
 		-D_GNU_SOURCE

 __build:	$(LOGO-y)

 $(LOGO_H):	$(obj)/bmp_logo $(LOGO_BMP)
 	$(obj)/bmp_logo --gen-info $(LOGO_BMP) > $@

 ifeq ($(CONFIG_DM_VIDEO),y)
 $(LOGO_DATA_H):	$(obj)/bmp_logo $(LOGO_BMP)
 	$(obj)/bmp_logo --gen-bmp $(LOGO_BMP) > $@
 else
 $(LOGO_DATA_H):	$(obj)/bmp_logo $(LOGO_BMP)
 	$(obj)/bmp_logo --gen-data $(LOGO_BMP) > $@
 #endif
 endif

 # Let clean descend into subdirs
 subdir- += env

 ifneq ($(CROSS_BUILD_TOOLS),)
 override HOSTCC = $(CC)
 override HOSTCFLAGS = $(CFLAGS)

 quiet_cmd_crosstools_strip = STRIP   $^
       cmd_crosstools_strip = $(STRIP) $^; touch $@
 $(obj)/.strip: $(call objectify,$(filter $(always),$(hostprogs-y)))
 	$(call cmd,crosstools_strip)

 always += .strip
 endif
 clean-files += .strip
	# SPDX-License-Identifier: GPL-2.0+
	#
	# (C) Copyright 2000-2006
	# Wolfgang Denk, DENX Software Engineering, wd@denx.de.

	# A note on target vs host configuration:
	#
	# Host tools can be used across multiple targets, or different configurations
	# of the same target. Thus, host tools must be able to handle any combination
	# of target configurations. To prevent having different variations of the same
	# tool, the tool build options may not depend on target configuration.
	#
	# Some linux distributions package these utilities as u-boot-tools, and it
	# would be unmaintainable to have a different tool variation for each
	# arch or configuration.
	#
	# A couple of simple rules:
	#
	# 1) Do not use target CONFIG_* options to enable or disable features in host
	# tools. Only use the configs from tools/Kconfig
	# 2) It's okay to use target configs to disable building specific tools.
	# That's as long as the features of those tools aren't modified.
	#

	# Enable all the config-independent tools
	ifneq ($(HOST_TOOLS_ALL),)
	CONFIG_ARCH_KIRKWOOD = y
	CONFIG_LCD_LOGO = y
	CONFIG_CMD_LOADS = y
	CONFIG_CMD_NET = y
	CONFIG_XWAY_SWAP_BYTES = y
	CONFIG_NETCONSOLE = y
	CONFIG_SHA1_CHECK_UB_IMG = y
	CONFIG_ARCH_SUNXI = y
	endif

	subdir-$(HOST_TOOLS_ALL) += gdb

	# Merge all the different vars for envcrc into one
	ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
	ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y
	ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y
	ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y
	ENVCRC-$(CONFIG_ENV_IS_IN_NAND) = y
	ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y
	ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y
	CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y)

	hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params

	hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo
	hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
	HOSTCFLAGS_bmp_logo.o := -pedantic

	hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
	envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o

	hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
	HOSTCFLAGS_gen_eth_addr.o := -pedantic

	hostprogs-$(CONFIG_CMD_NET) += gen_ethaddr_crc
	gen_ethaddr_crc-objs := gen_ethaddr_crc.o lib/crc8.o
	HOSTCFLAGS_gen_ethaddr_crc.o := -pedantic

	hostprogs-$(CONFIG_CMD_LOADS) += img2srec
	HOSTCFLAGS_img2srec.o := -pedantic

	hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
	HOSTCFLAGS_xway-swap-bytes.o := -pedantic

	hostprogs-y += mkenvimage
	mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o

	hostprogs-y += dumpimage mkimage
	hostprogs-$(CONFIG_TOOLS_LIBCRYPTO) += fit_info fit_check_sign

	hostprogs-$(CONFIG_CMD_BOOTEFI_SELFTEST) += file2include

	FIT_OBJS-y := fit_common.o fit_image.o image-host.o boot/image-fit.o
	FIT_SIG_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := image-sig-host.o boot/image-fit-sig.o
	FIT_CIPHER_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := boot/image-cipher.o

	# The following files are synced with upstream DTC.
	# Use synced versions from scripts/dtc/libfdt/.
	LIBFDT_OBJS := $(addprefix libfdt/, fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o \
	fdt_strerror.o fdt_empty_tree.o fdt_addresses.o fdt_overlay.o)

	RSA_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/rsa/, \
	rsa-sign.o rsa-verify.o \
	rsa-mod-exp.o)

	ECDSA_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/ecdsa/, ecdsa-libcrypto.o)

	AES_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/aes/, \
	aes-encrypt.o aes-decrypt.o)

	# Cryptographic helpers and image types that depend on openssl/libcrypto
	LIBCRYPTO_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := \
	lib/fdt-libcrypto.o \
	sunxi_toc0.o

	ROCKCHIP_OBS = lib/rc4.o rkcommon.o rkimage.o rksd.o rkspi.o

	# common objs for dumpimage and mkimage
	dumpimage-mkimage-objs := aisimage.o \
	atmelimage.o \
	$(FIT_OBJS-y) \
	$(FIT_SIG_OBJS-y) \
	$(FIT_CIPHER_OBJS-y) \
	boot/fdt_region.o \
	boot/bootm.o \
	lib/crc32.o \
	default_image.o \
	lib/fdtdec_common.o \
	lib/fdtdec.o \
	boot/image.o \
	boot/image-host.o \
	imagetool.o \
	imximage.o \
	imx8image.o \
	imx8mimage.o \
	kwbimage.o \
	lib/md5.o \
	lpc32xximage.o \
	mxsimage.o \
	omapimage.o \
	os_support.o \
	pblimage.o \
	pbl_crc32.o \
	vybridimage.o \
	stm32image.o \
	$(ROCKCHIP_OBS) \
	socfpgaimage.o \
	sunxi_egon.o \
	lib/crc16-ccitt.o \
	lib/hash-checksum.o \
	lib/sha1.o \
	lib/sha256.o \
	lib/sha512.o \
	common/hash.o \
	ublimage.o \
	zynqimage.o \
	zynqmpimage.o \
	zynqmpbif.o \
	$(LIBCRYPTO_OBJS-y) \
	$(LIBFDT_OBJS) \
	gpimage.o \
	gpimage-common.o \
	mtk_image.o \
	$(ECDSA_OBJS-y) \
	$(RSA_OBJS-y) \
	$(AES_OBJS-y)

	dumpimage-objs := $(dumpimage-mkimage-objs) dumpimage.o
	mkimage-objs := $(dumpimage-mkimage-objs) mkimage.o
	fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o
	fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
	file2include-objs := file2include.o

	ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_TOOLS_LIBCRYPTO),)
	# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
	# the mxsimage support within tools/mxsimage.c .
	HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
	endif

	ifdef CONFIG_TOOLS_LIBCRYPTO
	# This affects include/image.h, but including the board config file
	# is tricky, so manually define this options here.
	HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE
	HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE_MAX_SIZE=0xffffffff
	HOST_EXTRACFLAGS += -DCONFIG_FIT_CIPHER
	endif

	# MXSImage needs LibSSL
	ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_TOOLS_LIBCRYPTO),)
	HOSTCFLAGS_kwbimage.o += \
	$(shell pkg-config --cflags libssl libcrypto 2> /dev/null \|\| echo "")
	HOSTLDLIBS_mkimage += \
	$(shell pkg-config --libs libssl libcrypto 2> /dev/null \|\| echo "-lssl -lcrypto")

	# OS X deprecate openssl in favour of CommonCrypto, supress deprecation
	# warnings on those systems
	ifeq ($(HOSTOS),darwin)
	HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations
	HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations
	HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations
	endif
	endif

	HOSTCFLAGS_fit_image.o += -DMKIMAGE_DTC=\"$(CONFIG_MKIMAGE_DTC_PATH)\"

	HOSTLDLIBS_dumpimage := $(HOSTLDLIBS_mkimage)
	HOSTLDLIBS_fit_info := $(HOSTLDLIBS_mkimage)
	HOSTLDLIBS_fit_check_sign := $(HOSTLDLIBS_mkimage)

	hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl
	hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
	HOSTCFLAGS_mkexynosspl.o := -pedantic

	HOSTCFLAGS_kwboot.o += -pthread
	HOSTLDLIBS_kwboot += -pthread -ltinfo

	ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
	hostprogs-$(CONFIG_X86) += ifdtool

	ifwitool-objs := ifwitool.o
	hostprogs-$(CONFIG_X86)$(CONFIG_SANDBOX) += ifwitool

	hostprogs-$(CONFIG_MX23) += mxsboot
	hostprogs-$(CONFIG_MX28) += mxsboot
	HOSTCFLAGS_mxsboot.o := -pedantic

	hostprogs-$(CONFIG_ARCH_SUNXI) += mksunxiboot
	hostprogs-$(CONFIG_ARCH_SUNXI) += sunxi-spl-image-builder
	sunxi-spl-image-builder-objs := sunxi-spl-image-builder.o lib/bch.o

	hostprogs-$(CONFIG_NETCONSOLE) += ncb
	hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1

	ubsha1-objs := os_support.o ubsha1.o lib/sha1.o

	HOSTCFLAGS_ubsha1.o := -pedantic

	hostprogs-$(CONFIG_ARCH_KIRKWOOD) += kwboot
	hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot
	hostprogs-y += proftool
	hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela
	hostprogs-$(CONFIG_RISCV) += prelink-riscv

	hostprogs-$(CONFIG_ARCH_OCTEON) += update_octeon_header
	update_octeon_header-objs := update_octeon_header.o lib/crc32.o

	hostprogs-y += fdtgrep
	fdtgrep-objs += $(LIBFDT_OBJS) boot/fdt_region.o fdtgrep.o

	ifneq ($(TOOLS_ONLY),y)
	hostprogs-y += spl_size_limit
	endif

	hostprogs-$(CONFIG_MIPS) += mips-relocs

	hostprogs-$(CONFIG_ASN1_COMPILER) += asn1_compiler
	HOSTCFLAGS_asn1_compiler.o = -idirafter $(srctree)/include

	HOSTCFLAGS_mkeficapsule.o += \
	$(shell pkg-config --cflags gnutls uuid 2> /dev/null \|\| echo "")
	HOSTLDLIBS_mkeficapsule += \
	$(shell pkg-config --libs gnutls uuid 2> /dev/null \|\| echo "-lgnutls -luuid")
	hostprogs-$(CONFIG_TOOLS_MKEFICAPSULE) += mkeficapsule

	# We build some files with extra pedantic flags to try to minimize things
	# that won't build on some weird host compiler -- though there are lots of
	# exceptions for files that aren't complaint.
	HOSTCFLAGS_crc32.o := -pedantic
	HOSTCFLAGS_crc8.o := -pedantic
	HOSTCFLAGS_md5.o := -pedantic
	HOSTCFLAGS_sha1.o := -pedantic
	HOSTCFLAGS_sha256.o := -pedantic
	HOSTCFLAGS_sha512.o := -pedantic -DCONFIG_SHA512 -DCONFIG_SHA384

	quiet_cmd_wrap = WRAP $@
	cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@

	$(obj)/boot/%.c $(obj)/common/%.c $(obj)/env/%.c $(obj)/lib/%.c:
	$(call cmd,wrap)

	clean-dirs := lib common

	always := $(hostprogs-y)

	# Generated LCD/video logo
	LOGO_H = $(objtree)/include/bmp_logo.h
	LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
	LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_H)
	LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_DATA_H)
	LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_H)
	LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_DATA_H)

	# Generic logo
	ifeq ($(LOGO_BMP),)
	LOGO_BMP= $(srctree)/$(src)/logos/denx.bmp

	# Use board logo and fallback to vendor
	ifneq ($(wildcard $(srctree)/$(src)/logos/$(BOARD).bmp),)
	LOGO_BMP= $(srctree)/$(src)/logos/$(BOARD).bmp
	else
	ifneq ($(wildcard $(srctree)/$(src)/logos/$(VENDOR).bmp),)
	LOGO_BMP= $(srctree)/$(src)/logos/$(VENDOR).bmp
	endif
	endif

	endif # !LOGO_BMP

	#
	# Use native tools and options
	# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
	# Define _GNU_SOURCE to obtain the getline prototype from stdio.h
	#
	HOST_EXTRACFLAGS += -include $(srctree)/include/compiler.h \
	$(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \
	-I$(srctree)/scripts/dtc/libfdt \
	-I$(srctree)/tools \
	-DUSE_HOSTCC \
	-D__KERNEL_STRICT_NAMES \
	-D_GNU_SOURCE

	__build: $(LOGO-y)

	$(LOGO_H): $(obj)/bmp_logo $(LOGO_BMP)
	$(obj)/bmp_logo --gen-info $(LOGO_BMP) > $@

	ifeq ($(CONFIG_DM_VIDEO),y)
	$(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
	$(obj)/bmp_logo --gen-bmp $(LOGO_BMP) > $@
	else
	$(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
	$(obj)/bmp_logo --gen-data $(LOGO_BMP) > $@
	#endif
	endif

	# Let clean descend into subdirs
	subdir- += env

	ifneq ($(CROSS_BUILD_TOOLS),)
	override HOSTCC = $(CC)
	override HOSTCFLAGS = $(CFLAGS)

	quiet_cmd_crosstools_strip = STRIP $^
	cmd_crosstools_strip = $(STRIP) $^; touch $@
	$(obj)/.strip: $(call objectify,$(filter $(always),$(hostprogs-y)))
	$(call cmd,crosstools_strip)

	always += .strip
	endif
	clean-files += .strip