| /* |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * Author: InKi Dae <inki.dae@samsung.com> |
| * Author: Donghwa Lee <dh09.lee@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <asm/io.h> |
| #include <lcd.h> |
| #include <div64.h> |
| #include <fdtdec.h> |
| #include <libfdt.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/cpu.h> |
| #include "exynos_fb.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static unsigned long *lcd_base_addr; |
| static vidinfo_t *pvid; |
| static struct exynos_fb *fimd_ctrl; |
| |
| void exynos_fimd_lcd_init_mem(u_long screen_base, u_long fb_size, |
| u_long palette_size) |
| { |
| lcd_base_addr = (unsigned long *)screen_base; |
| } |
| |
| static void exynos_fimd_set_dualrgb(unsigned int enabled) |
| { |
| unsigned int cfg = 0; |
| |
| if (enabled) { |
| cfg = EXYNOS_DUALRGB_BYPASS_DUAL | EXYNOS_DUALRGB_LINESPLIT | |
| EXYNOS_DUALRGB_VDEN_EN_ENABLE; |
| |
| /* in case of Line Split mode, MAIN_CNT doesn't neet to set. */ |
| cfg |= EXYNOS_DUALRGB_SUB_CNT(pvid->vl_col / 2) | |
| EXYNOS_DUALRGB_MAIN_CNT(0); |
| } |
| |
| writel(cfg, &fimd_ctrl->dualrgb); |
| } |
| |
| static void exynos_fimd_set_dp_clkcon(unsigned int enabled) |
| { |
| unsigned int cfg = 0; |
| |
| if (enabled) |
| cfg = EXYNOS_DP_CLK_ENABLE; |
| |
| writel(cfg, &fimd_ctrl->dp_mie_clkcon); |
| } |
| |
| static void exynos_fimd_set_par(unsigned int win_id) |
| { |
| unsigned int cfg = 0; |
| |
| /* set window control */ |
| cfg = readl((unsigned int)&fimd_ctrl->wincon0 + |
| EXYNOS_WINCON(win_id)); |
| |
| cfg &= ~(EXYNOS_WINCON_BITSWP_ENABLE | EXYNOS_WINCON_BYTESWP_ENABLE | |
| EXYNOS_WINCON_HAWSWP_ENABLE | EXYNOS_WINCON_WSWP_ENABLE | |
| EXYNOS_WINCON_BURSTLEN_MASK | EXYNOS_WINCON_BPPMODE_MASK | |
| EXYNOS_WINCON_INRGB_MASK | EXYNOS_WINCON_DATAPATH_MASK); |
| |
| /* DATAPATH is DMA */ |
| cfg |= EXYNOS_WINCON_DATAPATH_DMA; |
| |
| cfg |= EXYNOS_WINCON_HAWSWP_ENABLE; |
| |
| /* dma burst is 16 */ |
| cfg |= EXYNOS_WINCON_BURSTLEN_16WORD; |
| |
| switch (pvid->vl_bpix) { |
| case 4: |
| cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565; |
| break; |
| default: |
| cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888; |
| break; |
| } |
| |
| writel(cfg, (unsigned int)&fimd_ctrl->wincon0 + |
| EXYNOS_WINCON(win_id)); |
| |
| /* set window position to x=0, y=0*/ |
| cfg = EXYNOS_VIDOSD_LEFT_X(0) | EXYNOS_VIDOSD_TOP_Y(0); |
| writel(cfg, (unsigned int)&fimd_ctrl->vidosd0a + |
| EXYNOS_VIDOSD(win_id)); |
| |
| cfg = EXYNOS_VIDOSD_RIGHT_X(pvid->vl_col - 1) | |
| EXYNOS_VIDOSD_BOTTOM_Y(pvid->vl_row - 1) | |
| EXYNOS_VIDOSD_RIGHT_X_E(1) | |
| EXYNOS_VIDOSD_BOTTOM_Y_E(0); |
| |
| writel(cfg, (unsigned int)&fimd_ctrl->vidosd0b + |
| EXYNOS_VIDOSD(win_id)); |
| |
| /* set window size for window0*/ |
| cfg = EXYNOS_VIDOSD_SIZE(pvid->vl_col * pvid->vl_row); |
| writel(cfg, (unsigned int)&fimd_ctrl->vidosd0c + |
| EXYNOS_VIDOSD(win_id)); |
| } |
| |
| static void exynos_fimd_set_buffer_address(unsigned int win_id) |
| { |
| unsigned long start_addr, end_addr; |
| |
| start_addr = (unsigned long)lcd_base_addr; |
| end_addr = start_addr + ((pvid->vl_col * (NBITS(pvid->vl_bpix) / 8)) * |
| pvid->vl_row); |
| |
| writel(start_addr, (unsigned int)&fimd_ctrl->vidw00add0b0 + |
| EXYNOS_BUFFER_OFFSET(win_id)); |
| writel(end_addr, (unsigned int)&fimd_ctrl->vidw00add1b0 + |
| EXYNOS_BUFFER_OFFSET(win_id)); |
| } |
| |
| static void exynos_fimd_set_clock(vidinfo_t *pvid) |
| { |
| unsigned int cfg = 0, div = 0, remainder, remainder_div; |
| unsigned long pixel_clock; |
| unsigned long long src_clock; |
| |
| if (pvid->dual_lcd_enabled) { |
| pixel_clock = pvid->vl_freq * |
| (pvid->vl_hspw + pvid->vl_hfpd + |
| pvid->vl_hbpd + pvid->vl_col / 2) * |
| (pvid->vl_vspw + pvid->vl_vfpd + |
| pvid->vl_vbpd + pvid->vl_row); |
| } else if (pvid->interface_mode == FIMD_CPU_INTERFACE) { |
| pixel_clock = pvid->vl_freq * |
| pvid->vl_width * pvid->vl_height * |
| (pvid->cs_setup + pvid->wr_setup + |
| pvid->wr_act + pvid->wr_hold + 1); |
| } else { |
| pixel_clock = pvid->vl_freq * |
| (pvid->vl_hspw + pvid->vl_hfpd + |
| pvid->vl_hbpd + pvid->vl_col) * |
| (pvid->vl_vspw + pvid->vl_vfpd + |
| pvid->vl_vbpd + pvid->vl_row); |
| } |
| |
| cfg = readl(&fimd_ctrl->vidcon0); |
| cfg &= ~(EXYNOS_VIDCON0_CLKSEL_MASK | EXYNOS_VIDCON0_CLKVALUP_MASK | |
| EXYNOS_VIDCON0_CLKVAL_F(0xFF) | EXYNOS_VIDCON0_VCLKEN_MASK | |
| EXYNOS_VIDCON0_CLKDIR_MASK); |
| cfg |= (EXYNOS_VIDCON0_CLKSEL_SCLK | EXYNOS_VIDCON0_CLKVALUP_ALWAYS | |
| EXYNOS_VIDCON0_VCLKEN_NORMAL | EXYNOS_VIDCON0_CLKDIR_DIVIDED); |
| |
| src_clock = (unsigned long long) get_lcd_clk(); |
| |
| /* get quotient and remainder. */ |
| remainder = do_div(src_clock, pixel_clock); |
| div = src_clock; |
| |
| remainder *= 10; |
| remainder_div = remainder / pixel_clock; |
| |
| /* round about one places of decimals. */ |
| if (remainder_div >= 5) |
| div++; |
| |
| /* in case of dual lcd mode. */ |
| if (pvid->dual_lcd_enabled) |
| div--; |
| |
| cfg |= EXYNOS_VIDCON0_CLKVAL_F(div - 1); |
| writel(cfg, &fimd_ctrl->vidcon0); |
| } |
| |
| void exynos_set_trigger(void) |
| { |
| unsigned int cfg = 0; |
| |
| cfg = readl(&fimd_ctrl->trigcon); |
| |
| cfg |= (EXYNOS_I80SOFT_TRIG_EN | EXYNOS_I80START_TRIG); |
| |
| writel(cfg, &fimd_ctrl->trigcon); |
| } |
| |
| int exynos_is_i80_frame_done(void) |
| { |
| unsigned int cfg = 0; |
| int status; |
| |
| cfg = readl(&fimd_ctrl->trigcon); |
| |
| /* frame done func is valid only when TRIMODE[0] is set to 1. */ |
| status = (cfg & EXYNOS_I80STATUS_TRIG_DONE) == |
| EXYNOS_I80STATUS_TRIG_DONE; |
| |
| return status; |
| } |
| |
| static void exynos_fimd_lcd_on(void) |
| { |
| unsigned int cfg = 0; |
| |
| /* display on */ |
| cfg = readl(&fimd_ctrl->vidcon0); |
| cfg |= (EXYNOS_VIDCON0_ENVID_ENABLE | EXYNOS_VIDCON0_ENVID_F_ENABLE); |
| writel(cfg, &fimd_ctrl->vidcon0); |
| } |
| |
| static void exynos_fimd_window_on(unsigned int win_id) |
| { |
| unsigned int cfg = 0; |
| |
| /* enable window */ |
| cfg = readl((unsigned int)&fimd_ctrl->wincon0 + |
| EXYNOS_WINCON(win_id)); |
| cfg |= EXYNOS_WINCON_ENWIN_ENABLE; |
| writel(cfg, (unsigned int)&fimd_ctrl->wincon0 + |
| EXYNOS_WINCON(win_id)); |
| |
| cfg = readl(&fimd_ctrl->winshmap); |
| cfg |= EXYNOS_WINSHMAP_CH_ENABLE(win_id); |
| writel(cfg, &fimd_ctrl->winshmap); |
| } |
| |
| void exynos_fimd_lcd_off(void) |
| { |
| unsigned int cfg = 0; |
| |
| cfg = readl(&fimd_ctrl->vidcon0); |
| cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); |
| writel(cfg, &fimd_ctrl->vidcon0); |
| } |
| |
| void exynos_fimd_window_off(unsigned int win_id) |
| { |
| unsigned int cfg = 0; |
| |
| cfg = readl((unsigned int)&fimd_ctrl->wincon0 + |
| EXYNOS_WINCON(win_id)); |
| cfg &= EXYNOS_WINCON_ENWIN_DISABLE; |
| writel(cfg, (unsigned int)&fimd_ctrl->wincon0 + |
| EXYNOS_WINCON(win_id)); |
| |
| cfg = readl(&fimd_ctrl->winshmap); |
| cfg &= ~EXYNOS_WINSHMAP_CH_DISABLE(win_id); |
| writel(cfg, &fimd_ctrl->winshmap); |
| } |
| |
| #ifdef CONFIG_OF_CONTROL |
| /* |
| * The reset value for FIMD SYSMMU register MMU_CTRL is 3 |
| * on Exynos5420 and newer versions. |
| * This means FIMD SYSMMU is on by default on Exynos5420 |
| * and newer versions. |
| * Since in u-boot we don't use SYSMMU, we should disable |
| * those FIMD SYSMMU. |
| * Note that there are 2 SYSMMU for FIMD: m0 and m1. |
| * m0 handles windows 0 and 4, and m1 handles windows 1, 2 and 3. |
| * We disable both of them here. |
| */ |
| void exynos_fimd_disable_sysmmu(void) |
| { |
| u32 *sysmmufimd; |
| unsigned int node; |
| int node_list[2]; |
| int count; |
| int i; |
| |
| count = fdtdec_find_aliases_for_id(gd->fdt_blob, "fimd", |
| COMPAT_SAMSUNG_EXYNOS_SYSMMU, node_list, 2); |
| for (i = 0; i < count; i++) { |
| node = node_list[i]; |
| if (node <= 0) { |
| debug("Can't get device node for fimd sysmmu\n"); |
| return; |
| } |
| |
| sysmmufimd = (u32 *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); |
| if (!sysmmufimd) { |
| debug("Can't get base address for sysmmu fimdm0"); |
| return; |
| } |
| |
| writel(0x0, sysmmufimd); |
| } |
| } |
| #endif |
| |
| void exynos_fimd_lcd_init(vidinfo_t *vid) |
| { |
| unsigned int cfg = 0, rgb_mode; |
| unsigned int offset; |
| #ifdef CONFIG_OF_CONTROL |
| unsigned int node; |
| |
| node = fdtdec_next_compatible(gd->fdt_blob, |
| 0, COMPAT_SAMSUNG_EXYNOS_FIMD); |
| if (node <= 0) |
| debug("exynos_fb: Can't get device node for fimd\n"); |
| |
| fimd_ctrl = (struct exynos_fb *)fdtdec_get_addr(gd->fdt_blob, |
| node, "reg"); |
| if (fimd_ctrl == NULL) |
| debug("Can't get the FIMD base address\n"); |
| |
| if (fdtdec_get_bool(gd->fdt_blob, node, "samsung,disable-sysmmu")) |
| exynos_fimd_disable_sysmmu(); |
| |
| #else |
| fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd(); |
| #endif |
| |
| offset = exynos_fimd_get_base_offset(); |
| |
| /* store panel info to global variable */ |
| pvid = vid; |
| |
| rgb_mode = vid->rgb_mode; |
| |
| if (vid->interface_mode == FIMD_RGB_INTERFACE) { |
| cfg |= EXYNOS_VIDCON0_VIDOUT_RGB; |
| writel(cfg, &fimd_ctrl->vidcon0); |
| |
| cfg = readl(&fimd_ctrl->vidcon2); |
| cfg &= ~(EXYNOS_VIDCON2_WB_MASK | |
| EXYNOS_VIDCON2_TVFORMATSEL_MASK | |
| EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK); |
| cfg |= EXYNOS_VIDCON2_WB_DISABLE; |
| writel(cfg, &fimd_ctrl->vidcon2); |
| |
| /* set polarity */ |
| cfg = 0; |
| if (!pvid->vl_clkp) |
| cfg |= EXYNOS_VIDCON1_IVCLK_RISING_EDGE; |
| if (!pvid->vl_hsp) |
| cfg |= EXYNOS_VIDCON1_IHSYNC_INVERT; |
| if (!pvid->vl_vsp) |
| cfg |= EXYNOS_VIDCON1_IVSYNC_INVERT; |
| if (!pvid->vl_dp) |
| cfg |= EXYNOS_VIDCON1_IVDEN_INVERT; |
| |
| writel(cfg, (unsigned int)&fimd_ctrl->vidcon1 + offset); |
| |
| /* set timing */ |
| cfg = EXYNOS_VIDTCON0_VFPD(pvid->vl_vfpd - 1); |
| cfg |= EXYNOS_VIDTCON0_VBPD(pvid->vl_vbpd - 1); |
| cfg |= EXYNOS_VIDTCON0_VSPW(pvid->vl_vspw - 1); |
| writel(cfg, (unsigned int)&fimd_ctrl->vidtcon0 + offset); |
| |
| cfg = EXYNOS_VIDTCON1_HFPD(pvid->vl_hfpd - 1); |
| cfg |= EXYNOS_VIDTCON1_HBPD(pvid->vl_hbpd - 1); |
| cfg |= EXYNOS_VIDTCON1_HSPW(pvid->vl_hspw - 1); |
| |
| writel(cfg, (unsigned int)&fimd_ctrl->vidtcon1 + offset); |
| |
| /* set lcd size */ |
| cfg = EXYNOS_VIDTCON2_HOZVAL(pvid->vl_col - 1) | |
| EXYNOS_VIDTCON2_LINEVAL(pvid->vl_row - 1) | |
| EXYNOS_VIDTCON2_HOZVAL_E(pvid->vl_col - 1) | |
| EXYNOS_VIDTCON2_LINEVAL_E(pvid->vl_row - 1); |
| |
| writel(cfg, (unsigned int)&fimd_ctrl->vidtcon2 + offset); |
| } |
| |
| /* set display mode */ |
| cfg = readl(&fimd_ctrl->vidcon0); |
| cfg &= ~EXYNOS_VIDCON0_PNRMODE_MASK; |
| cfg |= (rgb_mode << EXYNOS_VIDCON0_PNRMODE_SHIFT); |
| writel(cfg, &fimd_ctrl->vidcon0); |
| |
| /* set par */ |
| exynos_fimd_set_par(pvid->win_id); |
| |
| /* set memory address */ |
| exynos_fimd_set_buffer_address(pvid->win_id); |
| |
| /* set buffer size */ |
| cfg = EXYNOS_VIDADDR_PAGEWIDTH(pvid->vl_col * NBITS(pvid->vl_bpix) / 8) | |
| EXYNOS_VIDADDR_PAGEWIDTH_E(pvid->vl_col * NBITS(pvid->vl_bpix) / 8) | |
| EXYNOS_VIDADDR_OFFSIZE(0) | |
| EXYNOS_VIDADDR_OFFSIZE_E(0); |
| |
| writel(cfg, (unsigned int)&fimd_ctrl->vidw00add2 + |
| EXYNOS_BUFFER_SIZE(pvid->win_id)); |
| |
| /* set clock */ |
| exynos_fimd_set_clock(pvid); |
| |
| /* set rgb mode to dual lcd. */ |
| exynos_fimd_set_dualrgb(pvid->dual_lcd_enabled); |
| |
| /* display on */ |
| exynos_fimd_lcd_on(); |
| |
| /* window on */ |
| exynos_fimd_window_on(pvid->win_id); |
| |
| exynos_fimd_set_dp_clkcon(pvid->dp_enabled); |
| } |
| |
| unsigned long exynos_fimd_calc_fbsize(void) |
| { |
| return pvid->vl_col * pvid->vl_row * (NBITS(pvid->vl_bpix) / 8); |
| } |