| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * T2080/T2081 Silicon/SoC Device Tree Source (pre include) |
| * |
| * Copyright 2013 Freescale Semiconductor Inc. |
| * Copyright 2018 NXP |
| */ |
| |
| /dts-v1/; |
| |
| /include/ "e6500_power_isa.dtsi" |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: PowerPC,e6500@0 { |
| device_type = "cpu"; |
| reg = <0 1>; |
| fsl,portid-mapping = <0x80000000>; |
| }; |
| cpu1: PowerPC,e6500@2 { |
| device_type = "cpu"; |
| reg = <2 3>; |
| fsl,portid-mapping = <0x80000000>; |
| }; |
| cpu2: PowerPC,e6500@4 { |
| device_type = "cpu"; |
| reg = <4 5>; |
| fsl,portid-mapping = <0x80000000>; |
| }; |
| cpu3: PowerPC,e6500@6 { |
| device_type = "cpu"; |
| reg = <6 7>; |
| fsl,portid-mapping = <0x80000000>; |
| }; |
| }; |
| |
| soc: soc@ffe000000 { |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <4>; |
| reg = <0x40000 0x40000>; |
| compatible = "fsl,mpic"; |
| device_type = "open-pic"; |
| clock-frequency = <0x0>; |
| }; |
| |
| esdhc: esdhc@114000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x114000 0x1000>; |
| interrupts = <48 2 0 0>; |
| clock-frequency = <0>; |
| sdhci,auto-cmd12; |
| bus-width = <4>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| }; |
| |
| usb0: usb@210000 { |
| compatible = "fsl-usb2-mph"; |
| reg = <0x210000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <44 0x2 0 0>; |
| phy_type = "utmi"; |
| }; |
| |
| usb1: usb@211000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x211000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <45 0x2 0 0>; |
| dr_mode = "host"; |
| phy_type = "utmi"; |
| }; |
| |
| sata: sata@220000 { |
| compatible = "fsl,pq-sata-v2"; |
| reg = <0x220000 0x1000>; |
| interrupts = <68 0x2 0 0>; |
| sata-offset = <0x1000>; |
| sata-number = <2>; |
| sata-fpdma = <0>; |
| }; |
| }; |
| |
| pcie@ffe240000 { |
| compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe240000 0x0 0x4000>; /* registers */ |
| law_trgt_if = <0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@ffe250000 { |
| compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe250000 0x0 0x1000>; /* registers */ |
| law_trgt_if = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@ffe260000 { |
| compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe260000 0x0 0x1000>; /* registers */ |
| law_trgt_if = <2>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x30000000 0x0 0x10000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@ffe270000 { |
| compatible = "fsl,pcie-t2080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe270000 0x0 0x1000>; /* registers */ |
| law_trgt_if = <3>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8030000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x10000000>; /* non-prefetchable memory */ |
| }; |
| }; |