| /** |
| * @file IxFeatureCtrl.h |
| * |
| * @date 30-Jan-2003 |
| |
| * @brief This file contains the public API of the IXP400 Feature Control |
| * component. |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * SPDX-License-Identifier: BSD-3-Clause |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| /* ------------------------------------------------------ |
| Doxygen group definitions |
| ------------------------------------------------------ */ |
| /** |
| * @defgroup IxFeatureCtrlAPI IXP400 Feature Control (IxFeatureCtrl) API |
| * |
| * @brief The Public API for the IXP400 Feature Control. |
| * |
| * @{ |
| */ |
| |
| #ifndef IXFEATURECTRL_H |
| #define IXFEATURECTRL_H |
| |
| /* |
| * User defined include files |
| */ |
| #include "IxOsal.h" |
| |
| /* |
| * #defines and macros |
| */ |
| |
| /************************************************************* |
| * The following are IxFeatureCtrlComponentCheck return values. |
| ************************************************************/ |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_COMPONENT_DISABLED |
| * |
| * @brief Hardware Component is disabled/unavailable. |
| * Return status by ixFeatureCtrlComponentCheck() |
| */ |
| #define IX_FEATURE_CTRL_COMPONENT_DISABLED 0 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_COMPONENT_ENABLED |
| * |
| * @brief Hardware Component is available. |
| * Return status by ixFeatureCtrlComponentCheck() |
| */ |
| #define IX_FEATURE_CTRL_COMPONENT_ENABLED 1 |
| |
| /*********************************************************************************** |
| * Product ID in XScale CP15 - Register 0 |
| * - It contains information on the maximum XScale Core Frequency and |
| * Silicon Stepping. |
| * - XScale Core Frequency Id indicates only the maximum XScale frequency |
| * achievable and not the running XScale frequency (maybe stepped down). |
| * - The register is read by using ixFeatureCtrlProductIdRead. |
| * - Usage example: |
| * productId = ixFeatureCtrlProductIdRead(); |
| * if( (productId & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) == |
| * IX_FEATURE_CTRL_SILICON_TYPE_A0 ) |
| * if( (productId & IX_FEATURE_CTRL_XSCALE_FREQ_MASK) == |
| * IX_FEATURE_CTRL_XSCALE_FREQ_533 ) |
| * |
| * 31 28 27 24 23 20 19 16 15 12 11 9 8 4 3 0 |
| * -------------------------------------------------------------------------------- |
| * | 0x6 | 0x9 | 0x0 | 0x5 | 0x4 | Device ID | XScale Core Freq Id | Si Stepping Id | |
| * -------------------------------------------------------------------------------- |
| * |
| * Maximum Achievable XScale Core Frequency Id : 533MHz - 0x1C |
| * 400MHz - 0x1D |
| * 266MHz - 0x1F |
| * |
| * <b>THE CORE FREQUENCY ID IS NOT APPLICABLE TO IXP46X <\b> |
| * |
| * The above is applicable to IXP42X only. CP15 in IXP46X does not contain any |
| * Frequency ID. |
| * |
| * Si Stepping Id : A - 0x0 |
| * B - 0x1 |
| * |
| * XScale Core freq Id - Device ID [11:9] : IXP42X - 0x0 |
| * IXP46X - 0x1 |
| *************************************************************************************/ |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_SILICON_TYPE_A0 |
| * |
| * @brief This is the value of A0 Silicon in product ID. |
| */ |
| #define IX_FEATURE_CTRL_SILICON_TYPE_A0 0 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_SILICON_TYPE_B0 |
| * |
| * @brief This is the value of B0 Silicon in product ID. |
| */ |
| #define IX_FEATURE_CTRL_SILICON_TYPE_B0 1 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_SILICON_STEPPING_MASK |
| * |
| * @brief This is the mask of silicon stepping in product ID. |
| */ |
| #define IX_FEATURE_CTRL_SILICON_STEPPING_MASK 0xF |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_DEVICE_TYPE_MASK |
| * |
| * @brief This is the mask of silicon stepping in product ID. |
| */ |
| #define IX_FEATURE_CTRL_DEVICE_TYPE_MASK (0x7) |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET |
| * |
| * @brief This is the mask of silicon stepping in product ID. |
| */ |
| #define IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET 9 |
| |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_XSCALE_FREQ_533 |
| * |
| * @brief This is the value of 533MHz XScale Core in product ID. |
| */ |
| #define IX_FEATURE_CTRL_XSCALE_FREQ_533 ((0x1C)<<4) |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_XSCALE_FREQ_400 |
| * |
| * @brief This is the value of 400MHz XScale Core in product ID. |
| */ |
| #define IX_FEATURE_CTRL_XSCALE_FREQ_400 ((0x1D)<<4) |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_XSCALE_FREQ_266 |
| * |
| * @brief This is the value of 266MHz XScale Core in product ID. |
| */ |
| #define IX_FEATURE_CTRL_XSCALE_FREQ_266 ((0x1F)<<4) |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURE_CTRL_XSCALE_FREQ_MASK |
| * |
| * @brief This is the mask of XScale Core in product ID. |
| */ |
| #define IX_FEATURE_CTRL_XSCALE_FREQ_MASK ((0xFF)<<4) |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_UTOPIA_32PHY |
| * |
| * @brief Maximum UTOPIA PHY available is 32. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_UTOPIA_32PHY 0x0 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_UTOPIA_16PHY |
| * |
| * @brief Maximum UTOPIA PHY available is 16. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_UTOPIA_16PHY 0x1 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_UTOPIA_8PHY |
| * |
| * @brief Maximum UTOPIA PHY available to is 8. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_UTOPIA_8PHY 0x2 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_UTOPIA_4PHY |
| * |
| * @brief Maximum UTOPIA PHY available to is 4. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_UTOPIA_4PHY 0x3 |
| |
| #ifdef __ixp46X |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_XSCALE_533FREQ |
| * |
| * @brief Maximum frequency available to IXP46x is 533 MHz. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_XSCALE_533FREQ 0x0 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_XSCALE_667FREQ |
| * |
| * @brief Maximum frequency available to IXP46x is 667 MHz. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_XSCALE_667FREQ 0x1 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_XSCALE_400FREQ |
| * |
| * @brief Maximum frequency available to IXP46x is 400 MHz. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_XSCALE_400FREQ 0x2 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_REG_XSCALE_266FREQ |
| * |
| * @brief Maximum frequency available to IXP46x is 266 MHz. |
| * |
| */ |
| #define IX_FEATURECTRL_REG_XSCALE_266FREQ 0x3 |
| |
| #endif /* __ixp46X */ |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE |
| * |
| * @brief Component selected is not available for device |
| * |
| */ |
| #define IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE 0x0000 |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @def IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE |
| * |
| * @brief Component selected is not available for device |
| * |
| */ |
| #define IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE 0xffff |
| |
| /** |
| * @defgroup IxFeatureCtrlSwConfig Software Configuration for Access Component |
| * |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @brief This section describes software configuration in access component. The |
| * configuration can be changed at run-time. ixFeatureCtrlSwConfigurationCheck( ) |
| * will be used across applicable access component to check the configuration. |
| * ixFeatureCtrlSwConfigurationWrite( ) is used to write the software configuration. |
| * |
| * @note <b>All software configurations are default to be enabled.</b> |
| * |
| * @{ |
| */ |
| /** |
| * @ingroup IxFeatureCtrlSwConfig |
| * |
| * @def IX_FEATURE_CTRL_SWCONFIG_DISABLED |
| * |
| * @brief Software configuration is disabled. |
| * |
| */ |
| #define IX_FEATURE_CTRL_SWCONFIG_DISABLED 0 |
| |
| /** |
| * @ingroup IxFeatureCtrlSwConfig |
| * |
| * @def IX_FEATURE_CTRL_SWCONFIG_ENABLED |
| * |
| * @brief Software configuration is enabled. |
| * |
| */ |
| #define IX_FEATURE_CTRL_SWCONFIG_ENABLED 1 |
| |
| /** |
| * Section for enums |
| **/ |
| |
| /** |
| * @ingroup IxFeatureCtrlBuildDevice |
| * |
| * @enum IxFeatureCtrlBuildDevice |
| * |
| * @brief Indicates software build type. |
| * |
| * Default build type is IXP42X |
| * |
| */ |
| typedef enum |
| { |
| IX_FEATURE_CTRL_SW_BUILD_IXP42X = 0, /**<Build type is IXP42X */ |
| IX_FEATURE_CTRL_SW_BUILD_IXP46X /**<Build type is IXP46X */ |
| } IxFeatureCtrlBuildDevice; |
| |
| /** |
| * @ingroup IxFeatureCtrlSwConfig |
| * |
| * @enum IxFeatureCtrlSwConfig |
| * |
| * @brief Enumeration for software configuration in access components. |
| * |
| * Entry for new run-time software configuration should be added here. |
| */ |
| typedef enum |
| { |
| IX_FEATURECTRL_ETH_LEARNING = 0, /**< EthDB Learning Feature */ |
| IX_FEATURECTRL_ORIGB0_DISPATCHER, /**< IXP42X B0 and IXP46X dispatcher without |
| livelock prevention functionality Feature */ |
| IX_FEATURECTRL_SWCONFIG_MAX /**< Maximum boudary for IxFeatureCtrlSwConfig */ |
| } IxFeatureCtrlSwConfig; |
| |
| |
| /************************************************************************ |
| * IXP400 Feature Control Register |
| * - It contains the information (available/unavailable) of IXP425&IXP46X |
| * hardware components in their corresponding bit location. |
| * - Bit value of 0 means the hardware component is available |
| * or not software disabled. Hardware component that is available |
| * can be software disabled. |
| * - Bit value of 1 means the hardware is unavailable or software |
| * disabled.Hardware component that is unavailable cannot be software |
| * enabled. |
| * - Use ixFeatureCtrlHwCapabilityRead() to read the hardware component's |
| * availability. |
| * - Use ixFeatureCtrlRead() to get the current IXP425/IXP46X feature control |
| * register value. |
| * |
| * Bit Field Description (Hardware Component Availability) |
| * --- --------------------------------------------------- |
| * 0 RComp Circuitry |
| * 1 USB Controller |
| * 2 Hashing Coprocessor |
| * 3 AES Coprocessor |
| * 4 DES Coprocessor |
| * 5 HDLC Coprocessor |
| * 6 AAL Coprocessor - Always available in IXP46X |
| * 7 HSS Coprocesspr |
| * 8 Utopia Coprocessor |
| * 9 Ethernet 0 Coprocessor |
| * 10 Ethernet 1 Coprocessor |
| * 11 NPE A |
| * 12 NPE B |
| * 13 NPE C |
| * 14 PCI Controller |
| * 15 ECC/TimeSync Coprocessor - Only applicable to IXP46X |
| * 16-17 Utopia PHY Limit Status : 0x0 - 32 PHY |
| * 0x1 - 16 PHY |
| * 0x2 - 8 PHY |
| * 0x3 - 4 PHY |
| * |
| * Portions below are only applicable to IXP46X |
| * 18 USB Host Coprocessor |
| * 19 NPE A Ethernet - 0 for Enable if Utopia = 1 |
| * 20 NPE B Ethernet coprocessor 1-3. |
| * 21 RSA Crypto Block coprocessor. |
| * 22-23 Processor frequency : 0x0 - 533 MHz |
| * 0x1 - 667 MHz |
| * 0x2 - 400 MHz |
| * 0x3 - 266 MHz |
| * 24-31 Reserved |
| * |
| ************************************************************************/ |
| /*Section generic to both IXP42X and IXP46X*/ |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @enum IxFeatureCtrlComponentType |
| * |
| * @brief Enumeration for components availavble |
| * |
| */ |
| typedef enum |
| { |
| IX_FEATURECTRL_RCOMP = 0, /**<bit location for RComp Circuitry*/ |
| IX_FEATURECTRL_USB, /**<bit location for USB Controller*/ |
| IX_FEATURECTRL_HASH, /**<bit location for Hashing Coprocessor*/ |
| IX_FEATURECTRL_AES, /**<bit location for AES Coprocessor*/ |
| IX_FEATURECTRL_DES, /**<bit location for DES Coprocessor*/ |
| IX_FEATURECTRL_HDLC, /**<bit location for HDLC Coprocessor*/ |
| IX_FEATURECTRL_AAL, /**<bit location for AAL Coprocessor*/ |
| IX_FEATURECTRL_HSS, /**<bit location for HSS Coprocessor*/ |
| IX_FEATURECTRL_UTOPIA, /**<bit location for UTOPIA Coprocessor*/ |
| IX_FEATURECTRL_ETH0, /**<bit location for Ethernet 0 Coprocessor*/ |
| IX_FEATURECTRL_ETH1, /**<bit location for Ethernet 1 Coprocessor*/ |
| IX_FEATURECTRL_NPEA, /**<bit location for NPE A*/ |
| IX_FEATURECTRL_NPEB, /**<bit location for NPE B*/ |
| IX_FEATURECTRL_NPEC, /**<bit location for NPE C*/ |
| IX_FEATURECTRL_PCI, /**<bit location for PCI Controller*/ |
| IX_FEATURECTRL_ECC_TIMESYNC, /**<bit location for TimeSync Coprocessor*/ |
| IX_FEATURECTRL_UTOPIA_PHY_LIMIT, /**<bit location for Utopia PHY Limit Status*/ |
| IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2, /**<2nd bit of PHY limit status*/ |
| IX_FEATURECTRL_USB_HOST_CONTROLLER, /**<bit location for USB host controller*/ |
| IX_FEATURECTRL_NPEA_ETH, /**<bit location for NPE-A Ethernet Disable*/ |
| IX_FEATURECTRL_NPEB_ETH, /**<bit location for NPE-B Ethernet 1-3 Coprocessors Disable*/ |
| IX_FEATURECTRL_RSA, /**<bit location for RSA Crypto block Coprocessors Disable*/ |
| IX_FEATURECTRL_XSCALE_MAX_FREQ, /**<bit location for XScale max frequency*/ |
| IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2, /**<2nd xscale max freq bit NOT TO BE USED */ |
| IX_FEATURECTRL_MAX_COMPONENTS |
| } IxFeatureCtrlComponentType; |
| |
| /** |
| * @ingroup IxFeatureCtrlDeviceId |
| * |
| * @enum IxFeatureCtrlDeviceId |
| * |
| * @brief Enumeration for device type. |
| * |
| * @warning This enum is closely related to the npe image. Its format should comply |
| * with formats used in the npe image ImageID. This is indicated by the |
| * first nibble of the image ID. This should also be in sync with the |
| * with what is defined in CP15. Current available formats are |
| * - IXP42X - 0000 |
| * - IXP46X - 0001 |
| * |
| */ |
| typedef enum |
| { |
| IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X = 0, /**<Device type is IXP42X */ |
| IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X, /**<Device type is IXP46X */ |
| IX_FEATURE_CTRL_DEVICE_TYPE_MAX /**<Max devices */ |
| } IxFeatureCtrlDeviceId; |
| |
| |
| /** |
| * @} addtogroup IxFeatureCtrlSwConfig |
| */ |
| |
| /* |
| * Typedefs |
| */ |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @typedef IxFeatureCtrlReg |
| * |
| * @brief Feature Control Register that contains hardware components' |
| * availability information. |
| */ |
| typedef UINT32 IxFeatureCtrlReg; |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @typedef IxFeatureCtrlProductId |
| * |
| * @brief Product ID of Silicon that contains Silicon Stepping and |
| * Maximum XScale Core Frequency information. |
| */ |
| typedef UINT32 IxFeatureCtrlProductId; |
| |
| /* |
| * Prototypes for interface functions |
| */ |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IxFeatureCtrlReg ixFeatureCtrlRead (void) |
| * |
| * @brief This function reads out the CURRENT value of Feature Control Register. |
| * The current value may not be the same as that of the hardware component |
| * availability. |
| * |
| * The bit location of each hardware component is defined above. |
| * A value of '1' in bit means the hardware component is not available. A value of '0' |
| * means the hardware component is available. |
| * |
| * @return |
| * - IxFeatureCtrlReg - the current value of IXP400 Feature Control Register |
| */ |
| PUBLIC IxFeatureCtrlReg |
| ixFeatureCtrlRead (void); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IxFeatureDeviceId ixFeatureCtrlDeviceRead (void) |
| * |
| * @brief This function gets the type of device that the software is currently running |
| * on |
| * |
| * This function reads the feature Ctrl register specifically to obtain the device id. |
| * The definitions of the avilable IDs are as above. |
| * |
| * @return |
| * - IxFeatureCtrlDeviceId - the type of device currently running |
| */ |
| IxFeatureCtrlDeviceId |
| ixFeatureCtrlDeviceRead (void); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IxFeatureCtrlBuildDevice ixFeatureCtrlSoftwareBuildGet (void) |
| * |
| * @brief This function refers to the value set by the compiler flag to determine |
| * the type of device the software is built for. |
| * |
| * The function reads the compiler flag to determine the device the software is |
| * built for. When the user executes build in the command line, |
| * a compile time flag (__ixp42X/__ixp46X is set. This API reads this |
| * flag and returns the software build type to the calling client. |
| * |
| * @return |
| * - IxFeatureCtrlBuildDevice - the type of device software is built for. |
| */ |
| IxFeatureCtrlBuildDevice |
| ixFeatureCtrlSoftwareBuildGet (void); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IxFeatureCtrlReg ixFeatureCtrlHwCapabilityRead (void) |
| * |
| * @brief This function reads out the hardware capability of a silicon type as defined in |
| * feature control register.This value is different from that returned by |
| * ixFeatureCtrlRead() because this function returns the actual hardware component |
| * availability. |
| * |
| * The bit location of each hardware component is defined above. |
| * A value of '1' in bit means the hardware component is not available. A value of '0' |
| * means the hardware component is available. |
| * |
| * @return |
| * - IxFeatureCtrlReg - the hardware capability of IXP400. |
| * |
| * @warning |
| * - This function must not be called when IXP400 is running as the result |
| * is undefined. |
| */ |
| PUBLIC IxFeatureCtrlReg |
| ixFeatureCtrlHwCapabilityRead (void); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn void ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg) |
| * |
| * @brief This function write the value stored in IxFeatureCtrlReg expUnitReg |
| * to the Feature Control Register. |
| * |
| * The bit location of each hardware component is defined above. |
| * The write is only effective on available hardware components. Writing '1' in a |
| * bit will software disable the respective hardware component. A '0' will mean that |
| * the hardware component will remain to be operable. |
| * |
| * @param expUnitReg @ref IxFeatureCtrlReg [in] - The value to be written to feature control |
| * register. |
| * |
| * @return none |
| * |
| */ |
| PUBLIC void |
| ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IX_STATUS ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType) |
| * |
| * @brief This function will check the availability of hardware component specified |
| * as componentType value. |
| * |
| * Usage Example:<br> |
| * - if(IX_FEATURE_CTRL_COMPONENT_DISABLED != |
| * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0)) <br> |
| * - if(IX_FEATURE_CTRL_COMPONENT_ENABLED == |
| * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_PCI)) <br> |
| * |
| * This function is typically called during component initialization time. |
| * |
| * @param componentType @ref IxFeatureCtrlComponentType [in] - the type of a component as |
| * defined above as IX_FEATURECTRL_XXX (Exp: IX_FEATURECTRL_PCI, IX_FEATURECTRL_ETH0) |
| |
| * |
| * @return |
| * - IX_FEATURE_CTRL_COMPONENT_ENABLED if component is available |
| * - IX_FEATURE_CTRL_COMPONENT_DISABLED if component is unavailable |
| */ |
| PUBLIC IX_STATUS |
| ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IxFeatureCtrlProductId ixFeatureCtrlProductIdRead (void) |
| * |
| * @brief This function will return IXP400 product ID i.e. CP15, |
| * Register 0. |
| * |
| * @return |
| * - IxFeatureCtrlProductId - the value of product ID. |
| * |
| */ |
| PUBLIC IxFeatureCtrlProductId |
| ixFeatureCtrlProductIdRead (void) ; |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn IX_STATUS ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) |
| * |
| * @brief This function checks whether the specified software configuration is |
| * enabled or disabled. |
| * |
| * Usage Example:<br> |
| * - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED != |
| * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br> |
| * - if(IX_FEATURE_CTRL_SWCONFIG_ENABLED == |
| * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br> |
| * |
| * This function is typically called during access component initialization time. |
| * |
| * @param swConfigType @ref IxFeatureCtrlSwConfig [in] - the type of a software configuration |
| * defined in IxFeatureCtrlSwConfig enumeration. |
| * |
| * @return |
| * - IX_FEATURE_CTRL_SWCONFIG_ENABLED if software configuration is enabled. |
| * - IX_FEATURE_CTRL_SWCONFIG_DISABLED if software configuration is disabled. |
| */ |
| PUBLIC IX_STATUS |
| ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn void ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled) |
| * |
| * @brief This function enable/disable the specified software configuration. |
| * |
| * Usage Example:<br> |
| * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, true) is used |
| * to enable Ethernet Learning Feature <br> |
| * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false) is used |
| * to disable Ethernet Learning Feature <br> |
| * |
| * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration |
| * defined in IxFeatureCtrlSwConfig enumeration. |
| * @param enabled BOOL [in] - To enable(true) / disable (false) the specified software |
| * configuration. |
| * |
| * @return none |
| * |
| */ |
| PUBLIC void |
| ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled); |
| |
| /** |
| * @ingroup IxFeatureCtrlAPI |
| * |
| * @fn void ixFeatureCtrlIxp400SwVersionShow (void) |
| * |
| * @brief This function shows the current software release information for IXP400 |
| * |
| * @return none |
| * |
| */ |
| PUBLIC void |
| ixFeatureCtrlIxp400SwVersionShow (void); |
| |
| #endif /* IXFEATURECTRL_H */ |
| |
| /** |
| * @} defgroup IxFeatureCtrlAPI |
| */ |