blob: a8d57cdddefead190d69327a00e04b84868b60e2 [file] [log] [blame]
/*
* Copyright 2004, 2007, 2009-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include "../common/cadmus.h"
#include "../common/eeprom.h"
#include "../common/via.h"
void local_bus_init(void);
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
uint cpu_board_rev = get_cpu_board_revision ();
puts("Board: MPC8548CDS");
printf(" Carrier Rev: 0x%02x, PCI Slot %d\n",
get_board_version(), pci_slot);
printf(" Daughtercard Rev: %d.%d (0x%04x)\n",
MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
/*
* Initialize local bus.
*/
local_bus_init ();
/*
* Hack TSEC 3 and 4 IO voltages.
*/
gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */
ecm->eedr = 0xffffffff; /* clear ecm errors */
ecm->eeer = 0xffffffff; /* enable ecm errors */
return 0;
}
/*
* Initialize Local Bus
*/
void
local_bus_init(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv;
uint lbc_hz;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
gur->lbiuiplldcr1 = 0x00078080;
if (clkdiv == 16) {
gur->lbiuiplldcr0 = 0x7c0f1bf0;
} else if (clkdiv == 8) {
gur->lbiuiplldcr0 = 0x6c0f1bf0;
} else if (clkdiv == 4) {
gur->lbiuiplldcr0 = 0x5c0f1bf0;
}
lbc->lcrr |= 0x00030000;
asm("sync;isync;msync");
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
}
/*
* Initialize SDRAM memory on the Local Bus.
*/
void lbc_sdram_init(void)
{
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
uint idx;
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
uint cpu_board_rev;
uint lsdmr_common;
puts("LBC SDRAM: ");
print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
"\n");
/*
* Setup SDRAM Base and Option Registers
*/
set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
asm("msync");
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
asm("msync");
/*
* MPC8548 uses "new" 15-16 style addressing.
*/
cpu_board_rev = get_cpu_board_revision();
lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
lsdmr_common |= LSDMR_BSMA1516;
/*
* Issue PRECHARGE ALL command.
*/
lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(100);
/*
* Issue 8 AUTO REFRESH commands.
*/
for (idx = 0; idx < 8; idx++) {
lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(100);
}
/*
* Issue 8 MODE-set command.
*/
lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(100);
/*
* Issue NORMAL OP command.
*/
lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(200); /* Overkill. Must wait > 200 bus cycles */
#endif /* enable SDRAM init */
}
#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
/* For some reason the Tundra PCI bridge shows up on itself as a
* different device. Work around that by refusing to configure it.
*/
void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
mpc85xx_config_via_usbide, {0,0,0}},
{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
mpc85xx_config_via_usb, {0,0,0}},
{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
mpc85xx_config_via_usb2, {0,0,0}},
{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
mpc85xx_config_via_power, {0,0,0}},
{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
mpc85xx_config_via_ac97, {0,0,0}},
{},
};
static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
struct fsl_pci_info pci_info;
u32 devdisr, pordevsr, io_sel;
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
int first_free_busno = 0;
char buf[32];
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
porpllsr = in_be32(&gur->porpllsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
#ifdef CONFIG_PCI1
pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info, 1);
set_next_law(pci_info.mem_phys,
law_size_bits(pci_info.mem_size), pci_info.law);
set_next_law(pci_info.io_phys,
law_size_bits(pci_info.io_size), pci_info.law);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
strmhz(buf, pci_speed),
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
pci_info.regs);
pci1_hose.config_table = pci_mpc85xxcds_config_table;
first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
#ifdef CONFIG_PCIX_CHECK
if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
}
#endif
} else {
printf("PCI1: disabled\n");
}
puts("\n");
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
#ifdef CONFIG_PCI2
{
uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */
uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
if (pci_dual) {
printf("PCI2: 32 bit, 66 MHz, %s\n",
pci2_clk_sel ? "sync" : "async");
} else {
printf("PCI2: disabled\n");
}
}
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
#endif /* CONFIG_PCI2 */
fsl_pcie_init_board(first_free_busno);
}
int last_stage_init(void)
{
unsigned short temp;
/* Change the resistors for the PHY */
/* This is needed to get the RGMII working for the 1.3+
* CDS cards */
if (get_board_version() == 0x13) {
miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 29, 18);
miiphy_read(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 30, &temp);
temp = (temp & 0xf03f);
temp |= 2 << 9; /* 36 ohm */
temp |= 2 << 6; /* 39 ohm */
miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 30, temp);
miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 29, 3);
miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 30, 0x8000);
}
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_pci_setup(void *blob, bd_t *bd)
{
FT_FSL_PCI_SETUP;
}
#endif