| /* |
| * Copyright (C) 2013 Seco S.r.l |
| * |
| * Configuration settings for the Seco Boards. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include "mx6_common.h" |
| |
| #define CONFIG_BOARD_REVISION_TAG |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| #define CONFIG_MXC_UART |
| #define CONFIG_MXC_UART_BASE UART2_BASE |
| |
| /* Command definition */ |
| #define CONFIG_CMD_BMODE |
| #define CONFIG_CMD_SETEXPR |
| |
| #define CONFIG_SYS_MEMTEST_START 0x10000000 |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) |
| |
| /* MMC Configuration */ |
| #define CONFIG_FSL_ESDHC |
| #define CONFIG_FSL_USDHC |
| #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| |
| #define CONFIG_MMC |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_BOUNCE_BUFFER |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_DOS_PARTITION |
| |
| /* Ethernet Configuration */ |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NET |
| #define CONFIG_FEC_MXC |
| #define CONFIG_MII |
| #define IMX_FEC_BASE ENET_BASE_ADDR |
| #define CONFIG_FEC_XCV_TYPE RGMII |
| #define CONFIG_ETHPRIME "FEC" |
| #define CONFIG_FEC_MXC_PHYADDR 6 |
| #define CONFIG_PHYLIB |
| #define CONFIG_PHY_MICREL |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "ethprime=FEC0\0" \ |
| "netdev=eth0\0" \ |
| "ethprime=FEC0\0" \ |
| "uboot=u-boot.bin\0" \ |
| "kernel=uImage\0" \ |
| "nfsroot=/opt/eldk/arm\0" \ |
| "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \ |
| "ip_server=10.0.0.1\0" \ |
| "nfs_path=/targetfs \0" \ |
| "memory=mem=1024M\0" \ |
| "bootdev=mmc dev 0; ext2load mmc 0:1\0" \ |
| "root=root=/dev/mmcblk0p1\0" \ |
| "option=rootwait rw fixrtc rootflags=barrier=1\0" \ |
| "cpu_freq=arm_freq=996\0" \ |
| "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \ |
| " ${option} ${memory} ${cpu_freq}\0" \ |
| "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \ |
| " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \ |
| " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \ |
| " ${memory} ${cpu_freq}\0" \ |
| "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \ |
| "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \ |
| " bootm 0x10800000\0" \ |
| "stdin=serial\0" \ |
| "stdout=serial\0" \ |
| "stderr=serial\0" |
| |
| |
| /* Miscellaneous configurable options */ |
| #define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > " |
| |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| |
| #define CONFIG_SYS_HZ 1000 |
| |
| /* Physical Memory Map */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CONFIG_SYS_INIT_SP_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| |
| /* Environment organization */ |
| #define CONFIG_ENV_SIZE (8 * 1024) |
| |
| #if defined(CONFIG_ENV_IS_IN_MMC) |
| #define CONFIG_ENV_OFFSET (6 * 128 * 1024) |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #define CONFIG_DYNAMIC_MMC_DEVNO |
| #endif |
| |
| #define CONFIG_OF_LIBFDT |
| #define CONFIG_CMD_BOOTZ |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| #define CONFIG_CMD_CACHE |
| #endif |
| |
| #endif /* __CONFIG_H */ |