blob: a8a6b27d802b7c4e4dc9caa512e49b9daaf72c87 [file] [log] [blame]
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* Header file for the Marvell's Feroceon CPU core.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _MVEBU_SOC_H
#define _MVEBU_SOC_H
#define BIT(x) (1 << (x))
#define SOC_MV78460_ID 0x7846
#define SOC_88F6810_ID 0x6810
#define SOC_88F6820_ID 0x6820
#define SOC_88F6828_ID 0x6828
/* A38x revisions */
#define MV_88F68XX_Z1_ID 0x0
#define MV_88F68XX_A0_ID 0x4
/* TCLK Core Clock definition */
#ifndef CONFIG_SYS_TCLK
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
#endif
/* Armada XP PLL frequency (used for NAND clock generation) */
#define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000
/* SOC specific definations */
#define INTREG_BASE 0xd0000000
#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080)
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYS_MVEBU_DDR_A38X)
/*
* On A38x switching the regs base address without running from
* SDRAM doesn't seem to work. So let the SPL still use the
* default base address and switch to the new address in the
* main u-boot later.
*/
#define SOC_REGS_PHY_BASE 0xd0000000
#else
#define SOC_REGS_PHY_BASE 0xf1000000
#endif
#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x)
#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504))
#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000))
#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE
#define MVEBU_SPI_BASE (MVEBU_REGISTER(0x10600))
#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000))
#define MVEBU_UART0_BASE (MVEBU_REGISTER(0x12000))
#define MVEBU_UART1_BASE (MVEBU_REGISTER(0x12100))
#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000))
#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100))
#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140))
#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180))
#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200))
#define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700))
#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000))
#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180))
#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300))
#define MVEBU_EGIGA2_BASE (MVEBU_REGISTER(0x30000))
#define MVEBU_EGIGA3_BASE (MVEBU_REGISTER(0x34000))
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
#define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000))
#define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000))
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000))
#define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200))
#define MBUS_ERR_PROP_EN (1 << 8)
#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
#define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08)
#define NAND_EN BIT(0)
#define NAND_ARBITER_EN BIT(27)
#define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c)
#define GE0_PUP_EN BIT(0)
#define GE1_PUP_EN BIT(1)
#define LCD_PUP_EN BIT(2)
#define NAND_PUP_EN BIT(4)
#define SPI_PUP_EN BIT(5)
#define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8))
#define NAND_ECC_DIVCKL_RATIO_OFFS 8
#define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
#define SDRAM_MAX_CS 4
#define SDRAM_ADDR_MASK 0xFF000000
/* MVEBU CPU memory windows */
#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA
#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE
#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE
#endif /* _MVEBU_SOC_H */