| /* SPDX-License-Identifier: GPL-2.0+ */ |
| |
| #include <config.h> |
| #include <linux/linkage.h> |
| #include <asm/system.h> |
| #include <asm/pl310.h> |
| |
| ENTRY(arch_very_early_init) |
| #ifdef CONFIG_ARMADA_38X |
| /* |
| * Only with disabled MMU its possible to switch the base |
| * register address on Armada 38x. Without this the SDRAM |
| * located at >= 0x4000.0000 is also not accessible, as its |
| * still locked to cache. |
| * |
| * So to fully release / unlock this area from cache, we need |
| * to first flush all caches, then disable the MMU and |
| * disable the L2 cache. |
| */ |
| |
| /* Invalidate L1 I/D */ |
| mov r0, #0 @ set up for MCR |
| mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs |
| mcr p15, 0, r0, c7, c5, 0 @ invalidate icache |
| mcr p15, 0, r0, c7, c5, 6 @ invalidate BP array |
| mcr p15, 0, r0, c7, c10, 4 @ DSB |
| mcr p15, 0, r0, c7, c5, 4 @ ISB |
| |
| /* Disable MMU */ |
| mrc p15, 0, r0, c1, c0, 0 |
| bic r0, #CR_M |
| mcr p15, 0, r0, c1, c0, 0 |
| |
| /* |
| * Disable L2 cache |
| * |
| * NOTE: Internal registers are still at address INTREG_BASE_ADDR_REG |
| * but CONFIG_SYS_PL310_BASE is already calculated from base |
| * address SOC_REGS_PHY_BASE. |
| */ |
| ldr r1, =(CONFIG_SYS_PL310_BASE - SOC_REGS_PHY_BASE + INTREG_BASE_ADDR_REG) |
| ldr r0, [r1, #L2X0_CTRL_OFF] |
| bic r0, #L2X0_CTRL_EN |
| str r0, [r1, #L2X0_CTRL_OFF] |
| #endif |
| |
| /* Move internal registers from INTREG_BASE_ADDR_REG to SOC_REGS_PHY_BASE */ |
| ldr r0, =SOC_REGS_PHY_BASE |
| ldr r1, =INTREG_BASE_ADDR_REG |
| str r0, [r1] |
| add r0, r0, #0xC000 |
| mcr p15, 4, r0, c15, c0 |
| |
| bx lr |
| ENDPROC(arch_very_early_init) |