| /* |
| * Copyright (C) 2004 Texas Instruments. |
| * Copyright (C) 2009 David Brownell |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <common.h> |
| #include <netdev.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/io.h> |
| |
| /* offsets from PLL controller base */ |
| #define PLLC_PLLCTL 0x100 |
| #define PLLC_PLLM 0x110 |
| #define PLLC_PREDIV 0x114 |
| #define PLLC_PLLDIV1 0x118 |
| #define PLLC_PLLDIV2 0x11c |
| #define PLLC_PLLDIV3 0x120 |
| #define PLLC_POSTDIV 0x128 |
| #define PLLC_BPDIV 0x12c |
| #define PLLC_PLLDIV4 0x160 |
| #define PLLC_PLLDIV5 0x164 |
| #define PLLC_PLLDIV6 0x168 |
| #define PLLC_PLLDIV8 0x170 |
| #define PLLC_PLLDIV9 0x174 |
| |
| #define BIT(x) (1 << (x)) |
| |
| /* SOC-specific pll info */ |
| #ifdef CONFIG_SOC_DM355 |
| #define ARM_PLLDIV PLLC_PLLDIV1 |
| #define DDR_PLLDIV PLLC_PLLDIV1 |
| #endif |
| |
| #ifdef CONFIG_SOC_DM644X |
| #define ARM_PLLDIV PLLC_PLLDIV2 |
| #define DSP_PLLDIV PLLC_PLLDIV1 |
| #define DDR_PLLDIV PLLC_PLLDIV2 |
| #endif |
| |
| #ifdef CONFIG_SOC_DM6447 |
| #define ARM_PLLDIV PLLC_PLLDIV2 |
| #define DSP_PLLDIV PLLC_PLLDIV1 |
| #define DDR_PLLDIV PLLC_PLLDIV1 |
| #endif |
| |
| #ifdef CONFIG_SOC_DA8XX |
| const dv_reg * const sysdiv[7] = { |
| &davinci_pllc_regs->plldiv1, &davinci_pllc_regs->plldiv2, |
| &davinci_pllc_regs->plldiv3, &davinci_pllc_regs->plldiv4, |
| &davinci_pllc_regs->plldiv5, &davinci_pllc_regs->plldiv6, |
| &davinci_pllc_regs->plldiv7 |
| }; |
| |
| int clk_get(enum davinci_clk_ids id) |
| { |
| int pre_div; |
| int pllm; |
| int post_div; |
| int pll_out; |
| |
| pll_out = CONFIG_SYS_OSCIN_FREQ; |
| |
| if (id == DAVINCI_AUXCLK_CLKID) |
| goto out; |
| |
| /* |
| * Lets keep this simple. Combining operations can result in |
| * unexpected approximations |
| */ |
| pre_div = (readl(&davinci_pllc_regs->prediv) & |
| DAVINCI_PLLC_DIV_MASK) + 1; |
| pllm = readl(&davinci_pllc_regs->pllm) + 1; |
| |
| pll_out /= pre_div; |
| pll_out *= pllm; |
| |
| if (id == DAVINCI_PLLM_CLKID) |
| goto out; |
| |
| post_div = (readl(&davinci_pllc_regs->postdiv) & |
| DAVINCI_PLLC_DIV_MASK) + 1; |
| |
| pll_out /= post_div; |
| |
| if (id == DAVINCI_PLLC_CLKID) |
| goto out; |
| |
| pll_out /= (readl(sysdiv[id - 1]) & DAVINCI_PLLC_DIV_MASK) + 1; |
| |
| out: |
| return pll_out; |
| } |
| #endif /* CONFIG_SOC_DA8XX */ |
| |
| #ifdef CONFIG_DISPLAY_CPUINFO |
| |
| static unsigned pll_div(volatile void *pllbase, unsigned offset) |
| { |
| u32 div; |
| |
| div = REG(pllbase + offset); |
| return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1; |
| } |
| |
| static inline unsigned pll_prediv(volatile void *pllbase) |
| { |
| #ifdef CONFIG_SOC_DM355 |
| /* this register read seems to fail on pll0 */ |
| if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE) |
| return 8; |
| else |
| return pll_div(pllbase, PLLC_PREDIV); |
| #endif |
| return 1; |
| } |
| |
| static inline unsigned pll_postdiv(volatile void *pllbase) |
| { |
| #ifdef CONFIG_SOC_DM355 |
| return pll_div(pllbase, PLLC_POSTDIV); |
| #elif defined(CONFIG_SOC_DM6446) |
| if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE) |
| return pll_div(pllbase, PLLC_POSTDIV); |
| #endif |
| return 1; |
| } |
| |
| static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div) |
| { |
| volatile void *pllbase = (volatile void *) pll_addr; |
| unsigned base = CONFIG_SYS_HZ_CLOCK / 1000; |
| |
| /* the PLL might be bypassed */ |
| if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) { |
| base /= pll_prediv(pllbase); |
| base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff); |
| base /= pll_postdiv(pllbase); |
| } |
| return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div)); |
| } |
| |
| int print_cpuinfo(void) |
| { |
| /* REVISIT fetch and display CPU ID and revision information |
| * too ... that will matter as more revisions appear. |
| */ |
| printf("Cores: ARM %d MHz", |
| pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV)); |
| |
| #ifdef DSP_PLLDIV |
| printf(", DSP %d MHz", |
| pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV)); |
| #endif |
| |
| printf("\nDDR: %d MHz\n", |
| /* DDR PHY uses an x2 input clock */ |
| pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV) |
| / 2); |
| return 0; |
| } |
| |
| #endif |
| |
| /* |
| * Initializes on-chip ethernet controllers. |
| * to override, implement board_eth_init() |
| */ |
| int cpu_eth_init(bd_t *bis) |
| { |
| #if defined(CONFIG_DRIVER_TI_EMAC) |
| davinci_emac_initialize(); |
| #endif |
| return 0; |
| } |