| /* |
| * Copyright (c) 2013 Xilinx Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _ASM_ARCH_HARDWARE_H |
| #define _ASM_ARCH_HARDWARE_H |
| |
| #define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000 |
| #define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000 |
| #define ZYNQ_SCU_BASEADDR 0xF8F00000 |
| #define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 |
| #define ZYNQ_GEM_BASEADDR0 0xE000B000 |
| #define ZYNQ_GEM_BASEADDR1 0xE000C000 |
| #define ZYNQ_SDHCI_BASEADDR0 0xE0100000 |
| #define ZYNQ_SDHCI_BASEADDR1 0xE0101000 |
| |
| /* Reflect slcr offsets */ |
| struct slcr_regs { |
| u32 scl; /* 0x0 */ |
| u32 slcr_lock; /* 0x4 */ |
| u32 slcr_unlock; /* 0x8 */ |
| u32 reserved0[75]; |
| u32 gem0_rclk_ctrl; /* 0x138 */ |
| u32 gem1_rclk_ctrl; /* 0x13c */ |
| u32 gem0_clk_ctrl; /* 0x140 */ |
| u32 gem1_clk_ctrl; /* 0x144 */ |
| u32 reserved1[46]; |
| u32 pss_rst_ctrl; /* 0x200 */ |
| u32 reserved2[15]; |
| u32 fpga_rst_ctrl; /* 0x240 */ |
| u32 reserved3[5]; |
| u32 reboot_status; /* 0x258 */ |
| u32 boot_mode; /* 0x25c */ |
| u32 reserved4[116]; |
| u32 trust_zone; /* 0x430 */ /* FIXME */ |
| u32 reserved5[115]; |
| u32 ddr_urgent; /* 0x600 */ |
| u32 reserved6[6]; |
| u32 ddr_urgent_sel; /* 0x61c */ |
| u32 reserved7[188]; |
| u32 ocm_cfg; /* 0x910 */ |
| }; |
| |
| #define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR) |
| |
| struct devcfg_regs { |
| u32 ctrl; /* 0x0 */ |
| u32 lock; /* 0x4 */ |
| u32 cfg; /* 0x8 */ |
| u32 int_sts; /* 0xc */ |
| u32 int_mask; /* 0x10 */ |
| u32 status; /* 0x14 */ |
| u32 dma_src_addr; /* 0x18 */ |
| u32 dma_dst_addr; /* 0x1c */ |
| u32 dma_src_len; /* 0x20 */ |
| u32 dma_dst_len; /* 0x24 */ |
| u32 rom_shadow; /* 0x28 */ |
| u32 reserved1[2]; |
| u32 unlock; /* 0x34 */ |
| u32 reserved2[18]; |
| u32 mctrl; /* 0x80 */ |
| u32 reserved3; |
| u32 write_count; /* 0x88 */ |
| u32 read_count; /* 0x8c */ |
| }; |
| |
| #define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR) |
| |
| struct scu_regs { |
| u32 reserved1[16]; |
| u32 filter_start; /* 0x40 */ |
| u32 filter_end; /* 0x44 */ |
| }; |
| |
| #define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR) |
| |
| #endif /* _ASM_ARCH_HARDWARE_H */ |