| /* |
| * MCF5227x Internal Memory Map |
| * |
| * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __MCF5227X__ |
| #define __MCF5227X__ |
| |
| /* Interrupt Controller (INTC) */ |
| #define INT0_LO_RSVD0 (0) |
| #define INT0_LO_EPORT1 (1) |
| #define INT0_LO_EPORT4 (4) |
| #define INT0_LO_EPORT7 (7) |
| #define INT0_LO_EDMA_00 (8) |
| #define INT0_LO_EDMA_01 (9) |
| #define INT0_LO_EDMA_02 (10) |
| #define INT0_LO_EDMA_03 (11) |
| #define INT0_LO_EDMA_04 (12) |
| #define INT0_LO_EDMA_05 (13) |
| #define INT0_LO_EDMA_06 (14) |
| #define INT0_LO_EDMA_07 (15) |
| #define INT0_LO_EDMA_08 (16) |
| #define INT0_LO_EDMA_09 (17) |
| #define INT0_LO_EDMA_10 (18) |
| #define INT0_LO_EDMA_11 (19) |
| #define INT0_LO_EDMA_12 (20) |
| #define INT0_LO_EDMA_13 (21) |
| #define INT0_LO_EDMA_14 (22) |
| #define INT0_LO_EDMA_15 (23) |
| #define INT0_LO_EDMA_ERR (24) |
| #define INT0_LO_SCM_CWIC (25) |
| #define INT0_LO_UART0 (26) |
| #define INT0_LO_UART1 (27) |
| #define INT0_LO_UART2 (28) |
| #define INT0_LO_I2C (30) |
| #define INT0_LO_DSPI (31) |
| #define INT0_HI_DTMR0 (32) |
| #define INT0_HI_DTMR1 (33) |
| #define INT0_HI_DTMR2 (34) |
| #define INT0_HI_DTMR3 (35) |
| #define INT0_HI_SCMIR (62) |
| #define INT0_HI_RTC_ISR (63) |
| |
| #define INT1_HI_CAN_BOFFINT (1) |
| #define INT1_HI_CAN_ERRINT (3) |
| #define INT1_HI_CAN_BUF0I (4) |
| #define INT1_HI_CAN_BUF1I (5) |
| #define INT1_HI_CAN_BUF2I (6) |
| #define INT1_HI_CAN_BUF3I (7) |
| #define INT1_HI_CAN_BUF4I (8) |
| #define INT1_HI_CAN_BUF5I (9) |
| #define INT1_HI_CAN_BUF6I (10) |
| #define INT1_HI_CAN_BUF7I (11) |
| #define INT1_HI_CAN_BUF8I (12) |
| #define INT1_HI_CAN_BUF9I (13) |
| #define INT1_HI_CAN_BUF10I (14) |
| #define INT1_HI_CAN_BUF11I (15) |
| #define INT1_HI_CAN_BUF12I (16) |
| #define INT1_HI_CAN_BUF13I (17) |
| #define INT1_HI_CAN_BUF14I (18) |
| #define INT1_HI_CAN_BUF15I (19) |
| #define INT1_HI_PIT0_PIF (43) |
| #define INT1_HI_PIT1_PIF (44) |
| #define INT1_HI_USBOTG_STS (47) |
| #define INT1_HI_SSI_ISR (49) |
| #define INT1_HI_PWM_INT (50) |
| #define INT1_HI_LCDC_ISR (51) |
| #define INT1_HI_CCM_UOCSR (53) |
| #define INT1_HI_DSPI_EOQF (54) |
| #define INT1_HI_DSPI_TFFF (55) |
| #define INT1_HI_DSPI_TCF (56) |
| #define INT1_HI_DSPI_TFUF (57) |
| #define INT1_HI_DSPI_RFDF (58) |
| #define INT1_HI_DSPI_RFOF (59) |
| #define INT1_HI_DSPI_RFOF_TFUF (60) |
| #define INT1_HI_TOUCH_ADC (61) |
| #define INT1_HI_PLL_LOCKS (62) |
| |
| /********************************************************************* |
| * Reset Controller Module (RCM) |
| *********************************************************************/ |
| |
| /* Bit definitions and macros for RCR */ |
| #define RCM_RCR_FRCRSTOUT (0x40) |
| #define RCM_RCR_SOFTRST (0x80) |
| |
| /* Bit definitions and macros for RSR */ |
| #define RCM_RSR_LOL (0x01) |
| #define RCM_RSR_WDR_CORE (0x02) |
| #define RCM_RSR_EXT (0x04) |
| #define RCM_RSR_POR (0x08) |
| #define RCM_RSR_SOFT (0x20) |
| |
| /********************************************************************* |
| * Chip Configuration Module (CCM) |
| *********************************************************************/ |
| |
| /* Bit definitions and macros for CCR */ |
| #define CCM_CCR_DRAMSEL (0x0100) |
| #define CCM_CCR_CSC_UNMASK (0xFF3F) |
| #define CCM_CCR_CSC_FBCS5_CS4 (0x00C0) |
| #define CCM_CCR_CSC_FBCS5_A22 (0x0080) |
| #define CCM_CCR_CSC_FB_A23_A22 (0x0040) |
| #define CCM_CCR_LIMP (0x0020) |
| #define CCM_CCR_LOAD (0x0010) |
| #define CCM_CCR_BOOTPS_UNMASK (0xFFF3) |
| #define CCM_CCR_BOOTPS_PS16 (0x0008) |
| #define CCM_CCR_BOOTPS_PS8 (0x0004) |
| #define CCM_CCR_BOOTPS_PS32 (0x0000) |
| #define CCM_CCR_OSCMODE_OSCBYPASS (0x0002) |
| |
| /* Bit definitions and macros for RCON */ |
| #define CCM_RCON_CSC_UNMASK (0xFF3F) |
| #define CCM_RCON_CSC_FBCS5_CS4 (0x00C0) |
| #define CCM_RCON_CSC_FBCS5_A22 (0x0080) |
| #define CCM_RCON_CSC_FB_A23_A22 (0x0040) |
| #define CCM_RCON_LIMP (0x0020) |
| #define CCM_RCON_LOAD (0x0010) |
| #define CCM_RCON_BOOTPS_UNMASK (0xFFF3) |
| #define CCM_RCON_BOOTPS_PS16 (0x0008) |
| #define CCM_RCON_BOOTPS_PS8 (0x0004) |
| #define CCM_RCON_BOOTPS_PS32 (0x0000) |
| #define CCM_RCON_OSCMODE_OSCBYPASS (0x0002) |
| |
| /* Bit definitions and macros for CIR */ |
| #define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) |
| #define CCM_CIR_PRN(x) ((x) & 0x003F) |
| #define CCM_CIR_PIN_MCF52277 (0x0000) |
| |
| /* Bit definitions and macros for MISCCR */ |
| #define CCM_MISCCR_RTCSRC (0x4000) |
| #define CCM_MISCCR_USBPUE (0x2000) /* USB transceiver pull-up */ |
| #define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ |
| |
| #define CCM_MISCCR_BME (0x0800) /* Bus monitor ext en bit */ |
| #define CCM_MISCCR_BMT_65536 (0) |
| #define CCM_MISCCR_BMT_32768 (1) |
| #define CCM_MISCCR_BMT_16384 (2) |
| #define CCM_MISCCR_BMT_8192 (3) |
| #define CCM_MISCCR_BMT_4096 (4) |
| #define CCM_MISCCR_BMT_2048 (5) |
| #define CCM_MISCCR_BMT_1024 (6) |
| #define CCM_MISCCR_BMT_512 (7) |
| |
| #define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ |
| #define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ |
| #define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ |
| #define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ |
| #define CCM_MISCCR_LCDCHEN (0x0004) /* LCD Int CLK en */ |
| #define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense pol */ |
| #define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ |
| |
| /* Bit definitions and macros for CDR */ |
| #define CCM_CDR_USBDIV(x) (((x)&0x0003)<<12) |
| #define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clk div */ |
| #define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clk div */ |
| |
| /* Bit definitions and macros for UOCSR */ |
| #define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (rd-only) */ |
| #define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (rd-only) */ |
| #define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (rd-only) */ |
| #define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor en (rd-only) */ |
| #define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (rd-only) */ |
| #define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ |
| #define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ |
| #define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ |
| #define CCM_UOCSR_SEND (0x0010) /* Session end */ |
| #define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ |
| #define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt en */ |
| #define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down en */ |
| |
| /********************************************************************* |
| * General Purpose I/O Module (GPIO) |
| *********************************************************************/ |
| /* Bit definitions and macros for PAR_BE */ |
| #define GPIO_PAR_BE_UNMASK (0x0F) |
| #define GPIO_PAR_BE_BE3_BE3 (0x08) |
| #define GPIO_PAR_BE_BE3_GPIO (0x00) |
| #define GPIO_PAR_BE_BE2_BE2 (0x04) |
| #define GPIO_PAR_BE_BE2_GPIO (0x00) |
| #define GPIO_PAR_BE_BE1_BE1 (0x02) |
| #define GPIO_PAR_BE_BE1_GPIO (0x00) |
| #define GPIO_PAR_BE_BE0_BE0 (0x01) |
| #define GPIO_PAR_BE_BE0_GPIO (0x00) |
| |
| /* Bit definitions and macros for PAR_CS */ |
| #define GPIO_PAR_CS_CS3 (0x10) |
| #define GPIO_PAR_CS_CS2 (0x08) |
| #define GPIO_PAR_CS_CS1_FBCS1 (0x06) |
| #define GPIO_PAR_CS_CS1_SDCS1 (0x04) |
| #define GPIO_PAR_CS_CS1_GPIO (0x00) |
| #define GPIO_PAR_CS_CS0 (0x01) |
| |
| /* Bit definitions and macros for PAR_FBCTL */ |
| #define GPIO_PAR_FBCTL_OE (0x80) |
| #define GPIO_PAR_FBCTL_TA (0x40) |
| #define GPIO_PAR_FBCTL_RW (0x20) |
| #define GPIO_PAR_FBCTL_TS_UNMASK (0xE7) |
| #define GPIO_PAR_FBCTL_TS_FBTS (0x18) |
| #define GPIO_PAR_FBCTL_TS_DMAACK (0x10) |
| #define GPIO_PAR_FBCTL_TS_GPIO (0x00) |
| |
| /* Bit definitions and macros for PAR_FECI2C */ |
| #define GPIO_PAR_I2C_SCL_UNMASK (0xF3) |
| #define GPIO_PAR_I2C_SCL_SCL (0x0C) |
| #define GPIO_PAR_I2C_SCL_CANTXD (0x08) |
| #define GPIO_PAR_I2C_SCL_U2TXD (0x04) |
| #define GPIO_PAR_I2C_SCL_GPIO (0x00) |
| |
| #define GPIO_PAR_I2C_SDA_UNMASK (0xFC) |
| #define GPIO_PAR_I2C_SDA_SDA (0x03) |
| #define GPIO_PAR_I2C_SDA_CANRXD (0x02) |
| #define GPIO_PAR_I2C_SDA_U2RXD (0x01) |
| #define GPIO_PAR_I2C_SDA_GPIO (0x00) |
| |
| /* Bit definitions and macros for PAR_UART */ |
| #define GPIO_PAR_UART_U1CTS_UNMASK (0x3FFF) |
| #define GPIO_PAR_UART_U1CTS_U1CTS (0xC000) |
| #define GPIO_PAR_UART_U1CTS_SSIBCLK (0x8000) |
| #define GPIO_PAR_UART_U1CTS_LCDCLS (0x4000) |
| #define GPIO_PAR_UART_U1CTS_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U1RTS_UNMASK (0xCFFF) |
| #define GPIO_PAR_UART_U1RTS_U1RTS (0x3000) |
| #define GPIO_PAR_UART_U1RTS_SSIFS (0x2000) |
| #define GPIO_PAR_UART_U1RTS_LCDPS (0x1000) |
| #define GPIO_PAR_UART_U1RTS_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U1RXD_UNMASK (0xF3FF) |
| #define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00) |
| #define GPIO_PAR_UART_U1RXD_SSIRXD (0x0800) |
| #define GPIO_PAR_UART_U1RXD_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U1TXD_UNMASK (0xFCFF) |
| #define GPIO_PAR_UART_U1TXD_U1TXD (0x0300) |
| #define GPIO_PAR_UART_U1TXD_SSITXD (0x0200) |
| #define GPIO_PAR_UART_U1TXD_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U0CTS_UNMASK (0xFF3F) |
| #define GPIO_PAR_UART_U0CTS_U0CTS (0x00C0) |
| #define GPIO_PAR_UART_U0CTS_T1OUT (0x0080) |
| #define GPIO_PAR_UART_U0CTS_USBVBUSEN (0x0040) |
| #define GPIO_PAR_UART_U0CTS_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U0RTS_UNMASK (0xFFCF) |
| #define GPIO_PAR_UART_U0RTS_U0RTS (0x0030) |
| #define GPIO_PAR_UART_U0RTS_T1IN (0x0020) |
| #define GPIO_PAR_UART_U0RTS_USBVBUSOC (0x0010) |
| #define GPIO_PAR_UART_U0RTS_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U0RXD_UNMASK (0xFFF3) |
| #define GPIO_PAR_UART_U0RXD_U0RXD (0x000C) |
| #define GPIO_PAR_UART_U0RXD_CANRX (0x0008) |
| #define GPIO_PAR_UART_U0RXD_GPIO (0x0000) |
| |
| #define GPIO_PAR_UART_U0TXD_UNMASK (0xFFFC) |
| #define GPIO_PAR_UART_U0TXD_U0TXD (0x0003) |
| #define GPIO_PAR_UART_U0TXD_CANTX (0x0002) |
| #define GPIO_PAR_UART_U0TXD_GPIO (0x0000) |
| |
| /* Bit definitions and macros for PAR_DSPI */ |
| #define GPIO_PAR_DSPI_PCS0_UNMASK (0x3F) |
| #define GPIO_PAR_DSPI_PCS0_PCS0 (0xC0) |
| #define GPIO_PAR_DSPI_PCS0_U2RTS (0x80) |
| #define GPIO_PAR_DSPI_PCS0_GPIO (0x00) |
| #define GPIO_PAR_DSPI_SIN_UNMASK (0xCF) |
| #define GPIO_PAR_DSPI_SIN_SIN (0x30) |
| #define GPIO_PAR_DSPI_SIN_U2RXD (0x20) |
| #define GPIO_PAR_DSPI_SIN_GPIO (0x00) |
| #define GPIO_PAR_DSPI_SOUT_UNMASK (0xF3) |
| #define GPIO_PAR_DSPI_SOUT_SOUT (0x0C) |
| #define GPIO_PAR_DSPI_SOUT_U2TXD (0x08) |
| #define GPIO_PAR_DSPI_SOUT_GPIO (0x00) |
| #define GPIO_PAR_DSPI_SCK_UNMASK (0xFC) |
| #define GPIO_PAR_DSPI_SCK_SCK (0x03) |
| #define GPIO_PAR_DSPI_SCK_U2CTS (0x02) |
| #define GPIO_PAR_DSPI_SCK_GPIO (0x00) |
| |
| /* Bit definitions and macros for PAR_TIMER */ |
| #define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F) |
| #define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) |
| #define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) |
| #define GPIO_PAR_TIMER_T3IN_SSIMCLK (0x40) |
| #define GPIO_PAR_TIMER_T3IN_GPIO (0x00) |
| #define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF) |
| #define GPIO_PAR_TIMER_T2IN_T2IN (0x30) |
| #define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) |
| #define GPIO_PAR_TIMER_T2IN_DSPIPCS2 (0x10) |
| #define GPIO_PAR_TIMER_T2IN_GPIO (0x00) |
| #define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3) |
| #define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) |
| #define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) |
| #define GPIO_PAR_TIMER_T1IN_LCDCONTRAST (0x04) |
| #define GPIO_PAR_TIMER_T1IN_GPIO (0x00) |
| #define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC) |
| #define GPIO_PAR_TIMER_T0IN_T0IN (0x03) |
| #define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) |
| #define GPIO_PAR_TIMER_T0IN_LCDREV (0x01) |
| #define GPIO_PAR_TIMER_T0IN_GPIO (0x00) |
| |
| /* Bit definitions and macros for GPIO_PAR_LCDCTL */ |
| #define GPIO_PAR_LCDCTL_ACDOE_UNMASK (0xE7) |
| #define GPIO_PAR_LCDCTL_ACDOE_ACDOE (0x18) |
| #define GPIO_PAR_LCDCTL_ACDOE_SPLSPR (0x10) |
| #define GPIO_PAR_LCDCTL_ACDOE_GPIO (0x00) |
| #define GPIO_PAR_LCDCTL_FLM_VSYNC (0x04) |
| #define GPIO_PAR_LCDCTL_LP_HSYNC (0x02) |
| #define GPIO_PAR_LCDCTL_LSCLK (0x01) |
| |
| /* Bit definitions and macros for PAR_IRQ */ |
| #define GPIO_PAR_IRQ_IRQ4_UNMASK (0xF3) |
| #define GPIO_PAR_IRQ_IRQ4_SSIINPCLK (0x0C) |
| #define GPIO_PAR_IRQ_IRQ4_DMAREQ0 (0x08) |
| #define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) |
| #define GPIO_PAR_IRQ_IRQ1_UNMASK (0xFC) |
| #define GPIO_PAR_IRQ_IRQ1_PCIINT (0x03) |
| #define GPIO_PAR_IRQ_IRQ1_USBCLKIN (0x02) |
| #define GPIO_PAR_IRQ_IRQ1_SSICLKIN (0x01) |
| #define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) |
| |
| /* Bit definitions and macros for GPIO_PAR_LCDH */ |
| #define GPIO_PAR_LCDH_LD17_UNMASK (0xFFFFF3FF) |
| #define GPIO_PAR_LCDH_LD17_LD17 (0x00000C00) |
| #define GPIO_PAR_LCDH_LD17_LD11 (0x00000800) |
| #define GPIO_PAR_LCDH_LD17_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDH_LD16_UNMASK (0xFFFFFCFF) |
| #define GPIO_PAR_LCDH_LD16_LD16 (0x00000300) |
| #define GPIO_PAR_LCDH_LD16_LD10 (0x00000200) |
| #define GPIO_PAR_LCDH_LD16_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDH_LD15_UNMASK (0xFFFFFF3F) |
| #define GPIO_PAR_LCDH_LD15_LD15 (0x000000C0) |
| #define GPIO_PAR_LCDH_LD15_LD9 (0x00000080) |
| #define GPIO_PAR_LCDH_LD15_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDH_LD14_UNMASK (0xFFFFFFCF) |
| #define GPIO_PAR_LCDH_LD14_LD14 (0x00000030) |
| #define GPIO_PAR_LCDH_LD14_LD8 (0x00000020) |
| #define GPIO_PAR_LCDH_LD14_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDH_LD13_UNMASK (0xFFFFFFF3) |
| #define GPIO_PAR_LCDH_LD13_LD13 (0x0000000C) |
| #define GPIO_PAR_LCDH_LD13_CANTX (0x00000008) |
| #define GPIO_PAR_LCDH_LD13_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDH_LD12_UNMASK (0xFFFFFFFC) |
| #define GPIO_PAR_LCDH_LD12_LD12 (0x00000003) |
| #define GPIO_PAR_LCDH_LD12_CANRX (0x00000002) |
| #define GPIO_PAR_LCDH_LD12_GPIO (0x00000000) |
| |
| /* Bit definitions and macros for GPIO_PAR_LCDL */ |
| #define GPIO_PAR_LCDL_LD11_UNMASK (0x3FFFFFFF) |
| #define GPIO_PAR_LCDL_LD11_LD11 (0xC0000000) |
| #define GPIO_PAR_LCDL_LD11_LD7 (0x80000000) |
| #define GPIO_PAR_LCDL_LD11_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD10_UNMASK (0xCFFFFFFF) |
| #define GPIO_PAR_LCDL_LD10_LD10 (0x30000000) |
| #define GPIO_PAR_LCDL_LD10_LD6 (0x20000000) |
| #define GPIO_PAR_LCDL_LD10_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD9_UNMASK (0xF3FFFFFF) |
| #define GPIO_PAR_LCDL_LD9_LD9 (0x0C000000) |
| #define GPIO_PAR_LCDL_LD9_LD5 (0x08000000) |
| #define GPIO_PAR_LCDL_LD9_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD8_UNMASK (0xFCFFFFFF) |
| #define GPIO_PAR_LCDL_LD8_LD8 (0x03000000) |
| #define GPIO_PAR_LCDL_LD8_LD4 (0x02000000) |
| #define GPIO_PAR_LCDL_LD8_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD7_UNMASK (0xFF3FFFFF) |
| #define GPIO_PAR_LCDL_LD7_LD7 (0x00C00000) |
| #define GPIO_PAR_LCDL_LD7_PWM7 (0x00800000) |
| #define GPIO_PAR_LCDL_LD7_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD6_UNMASK (0xFFCFFFFF) |
| #define GPIO_PAR_LCDL_LD6_LD6 (0x00300000) |
| #define GPIO_PAR_LCDL_LD6_PWM5 (0x00200000) |
| #define GPIO_PAR_LCDL_LD6_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD5_UNMASK (0xFFF3FFFF) |
| #define GPIO_PAR_LCDL_LD5_LD5 (0x000C0000) |
| #define GPIO_PAR_LCDL_LD5_LD3 (0x00080000) |
| #define GPIO_PAR_LCDL_LD5_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD4_UNMASK (0xFFFCFFFF) |
| #define GPIO_PAR_LCDL_LD4_LD4 (0x00030000) |
| #define GPIO_PAR_LCDL_LD4_LD2 (0x00020000) |
| #define GPIO_PAR_LCDL_LD4_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD3_UNMASK (0xFFFF3FFF) |
| #define GPIO_PAR_LCDL_LD3_LD3 (0x0000C000) |
| #define GPIO_PAR_LCDL_LD3_LD1 (0x00008000) |
| #define GPIO_PAR_LCDL_LD3_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD2_UNMASK (0xFFFFCFFF) |
| #define GPIO_PAR_LCDL_LD2_LD2 (0x00003000) |
| #define GPIO_PAR_LCDL_LD2_LD0 (0x00002000) |
| #define GPIO_PAR_LCDL_LD2_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD1_UNMASK (0xFFFFF3FF) |
| #define GPIO_PAR_LCDL_LD1_LD1 (0x00000C00) |
| #define GPIO_PAR_LCDL_LD1_PWM3 (0x00000800) |
| #define GPIO_PAR_LCDL_LD1_GPIO (0x00000000) |
| |
| #define GPIO_PAR_LCDL_LD0_UNMASK (0xFFFFFCFF) |
| #define GPIO_PAR_LCDL_LD0_LD0 (0x00000300) |
| #define GPIO_PAR_LCDL_LD0_PWM1 (0x00000200) |
| #define GPIO_PAR_LCDL_LD0_GPIO (0x00000000) |
| |
| /* Bit definitions and macros for MSCR_FB */ |
| #define GPIO_MSCR_FB_DUPPER_UNMASK (0xCF) |
| #define GPIO_MSCR_FB_DUPPER_25V_33V (0x30) |
| #define GPIO_MSCR_FB_DUPPER_FULL_18V (0x20) |
| #define GPIO_MSCR_FB_DUPPER_OD (0x10) |
| #define GPIO_MSCR_FB_DUPPER_HALF_18V (0x00) |
| |
| #define GPIO_MSCR_FB_DLOWER_UNMASK (0xF3) |
| #define GPIO_MSCR_FB_DLOWER_25V_33V (0x0C) |
| #define GPIO_MSCR_FB_DLOWER_FULL_18V (0x08) |
| #define GPIO_MSCR_FB_DLOWER_OD (0x04) |
| #define GPIO_MSCR_FB_DLOWER_HALF_18V (0x00) |
| |
| #define GPIO_MSCR_FB_ADDRCTL_UNMASK (0xFC) |
| #define GPIO_MSCR_FB_ADDRCTL_25V_33V (0x03) |
| #define GPIO_MSCR_FB_ADDRCTL_FULL_18V (0x02) |
| #define GPIO_MSCR_FB_ADDRCTL_OD (0x01) |
| #define GPIO_MSCR_FB_ADDRCTL_HALF_18V (0x00) |
| |
| /* Bit definitions and macros for MSCR_SDRAM */ |
| #define GPIO_MSCR_SDRAM_SDCLKB_UNMASK (0xCF) |
| #define GPIO_MSCR_SDRAM_SDCLKB_25V_33V (0x30) |
| #define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V (0x20) |
| #define GPIO_MSCR_SDRAM_SDCLKB_OD (0x10) |
| #define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V (0x00) |
| |
| #define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3) |
| #define GPIO_MSCR_SDRAM_SDCLK_25V_33V (0x0C) |
| #define GPIO_MSCR_SDRAM_SDCLK_FULL_18V (0x08) |
| #define GPIO_MSCR_SDRAM_SDCLK_OPD (0x04) |
| #define GPIO_MSCR_SDRAM_SDCLK_HALF_18V (0x00) |
| |
| #define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC) |
| #define GPIO_MSCR_SDRAM_SDCTL_25V_33V (0x03) |
| #define GPIO_MSCR_SDRAM_SDCTL_FULL_18V (0x02) |
| #define GPIO_MSCR_SDRAM_SDCTL_OPD (0x01) |
| #define GPIO_MSCR_SDRAM_SDCTL_HALF_18V (0x00) |
| |
| /* Bit definitions and macros for Drive Strength Control */ |
| #define DSCR_LOAD_50PF (0x03) |
| #define DSCR_LOAD_30PF (0x02) |
| #define DSCR_LOAD_20PF (0x01) |
| #define DSCR_LOAD_10PF (0x00) |
| |
| /********************************************************************* |
| * SDRAM Controller (SDRAMC) |
| *********************************************************************/ |
| |
| /* Bit definitions and macros for SDMR */ |
| #define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ |
| #define SDRAMC_SDMR_CMD (0x00010000) /* Command */ |
| #define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ |
| #define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ |
| #define SDRAMC_SDMR_BK_LMR (0x00000000) |
| #define SDRAMC_SDMR_BK_LEMR (0x40000000) |
| |
| /* Bit definitions and macros for SDCR */ |
| #define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ |
| #define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ |
| #define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ |
| #define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ |
| #define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ |
| #define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ |
| #define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ |
| #define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ |
| #define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ |
| #define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ |
| #define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ |
| #define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ |
| #define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ |
| #define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000) |
| |
| /* Bit definitions and macros for SDCFG1 */ |
| #define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ |
| #define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ |
| #define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ |
| #define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ |
| #define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ |
| #define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ |
| #define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ |
| |
| /* Bit definitions and macros for SDCFG2 */ |
| #define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ |
| #define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ |
| #define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ |
| #define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ |
| |
| /* Bit definitions and macros for SDCS group */ |
| #define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ |
| #define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ |
| #define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) |
| #define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) |
| #define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) |
| #define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) |
| #define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) |
| #define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) |
| #define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) |
| #define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) |
| #define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) |
| #define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) |
| #define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) |
| #define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) |
| #define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) |
| #define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) |
| #define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) |
| |
| /********************************************************************* |
| * Phase Locked Loop (PLL) |
| *********************************************************************/ |
| |
| /* Bit definitions and macros for PCR */ |
| #define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */ |
| #define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for bus/flexbus clock frequency */ |
| #define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for SDRAM clock frequency */ |
| #define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */ |
| #define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */ |
| #define PLL_PCR_PFDR_MASK (0x000F0000) |
| #define PLL_PCR_OUTDIV5_MASK (0x000F0000) |
| #define PLL_PCR_OUTDIV3_MASK (0x00000F00) |
| #define PLL_PCR_OUTDIV2_MASK (0x000000F0) |
| #define PLL_PCR_OUTDIV1_MASK (0x0000000F) |
| |
| /* Bit definitions and macros for PSR */ |
| #define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */ |
| #define PLL_PSR_LOCK (0x00000002) /* PLL lock status */ |
| #define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */ |
| #define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */ |
| |
| /********************************************************************/ |
| |
| #endif /* __MCF5227X__ */ |