| /****************************************************************************** |
| * |
| * Name: lm80.h |
| * Project: GEnesis, PCI Gigabit Ethernet Adapter |
| * Version: $Revision: 1.4 $ |
| * Date: $Date: 2002/04/25 11:04:10 $ |
| * Purpose: Contains all defines for the LM80 Chip |
| * (National Semiconductor). |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * (C)Copyright 1998-2002 SysKonnect GmbH. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * The information in this file is provided "AS IS" without warranty. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * History: |
| * $Log: lm80.h,v $ |
| * Revision 1.4 2002/04/25 11:04:10 rschmidt |
| * Editorial changes |
| * |
| * Revision 1.3 1999/11/22 13:41:19 cgoos |
| * Changed license header to GPL. |
| * |
| * Revision 1.2 1999/03/12 13:26:51 malthoff |
| * remove __STDC__. |
| * |
| * Revision 1.1 1998/06/19 09:28:31 malthoff |
| * created. |
| * |
| * |
| ******************************************************************************/ |
| |
| #ifndef __INC_LM80_H |
| #define __INC_LM80_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /* defines ********************************************************************/ |
| |
| /* |
| * LM80 register definition |
| * |
| * All registers are 8 bit wide |
| */ |
| #define LM80_CFG 0x00 /* Configuration Register */ |
| #define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */ |
| #define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */ |
| #define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */ |
| #define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */ |
| #define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */ |
| #define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */ |
| /* 0x07 - 0x1f reserved */ |
| /* current values */ |
| #define LM80_VT0_IN 0x20 /* current Voltage 0 value */ |
| #define LM80_VT1_IN 0x21 /* current Voltage 1 value */ |
| #define LM80_VT2_IN 0x22 /* current Voltage 2 value */ |
| #define LM80_VT3_IN 0x23 /* current Voltage 3 value */ |
| #define LM80_VT4_IN 0x24 /* current Voltage 4 value */ |
| #define LM80_VT5_IN 0x25 /* current Voltage 5 value */ |
| #define LM80_VT6_IN 0x26 /* current Voltage 6 value */ |
| #define LM80_TEMP_IN 0x27 /* current Temperature value */ |
| #define LM80_FAN1_IN 0x28 /* current Fan 1 count */ |
| #define LM80_FAN2_IN 0x29 /* current Fan 2 count */ |
| /* limit values */ |
| #define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */ |
| #define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */ |
| #define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */ |
| #define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */ |
| #define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */ |
| #define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */ |
| #define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */ |
| #define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */ |
| #define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */ |
| #define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */ |
| #define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */ |
| #define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */ |
| #define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */ |
| #define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */ |
| #define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */ |
| #define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */ |
| #define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */ |
| #define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */ |
| #define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */ |
| #define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */ |
| /* 0x3e - 0x3f reserved */ |
| |
| /* |
| * LM80 bit definitions |
| */ |
| |
| /* LM80_CFG Configuration Register */ |
| #define LM80_CFG_START (1<<0) /* start monitoring operation */ |
| #define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */ |
| #define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */ |
| #define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */ |
| #define LM80_CFG_RESET (1<<4) /* signals a reset */ |
| #define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */ |
| #define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */ |
| #define LM80_CFG_INIT (1<<7) /* restore power on defaults */ |
| |
| /* LM80_ISRC_1 Interrupt Status Register 1 */ |
| /* LM80_IMSK_1 Interrupt Mask Register 1 */ |
| #define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */ |
| #define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */ |
| #define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */ |
| #define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */ |
| #define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */ |
| #define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */ |
| #define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */ |
| #define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */ |
| |
| /* LM80_ISRC_2 Interrupt Status Register 2 */ |
| /* LM80_IMSK_2 Interrupt Mask Register 2 */ |
| #define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */ |
| #define LM80_IS_BTI (1<<1) /* state of BTI# pin */ |
| #define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */ |
| #define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */ |
| #define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */ |
| #define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */ |
| /* bit 6 and 7 are reserved in LM80_ISRC_2 */ |
| #define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */ |
| #define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */ |
| |
| /* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */ |
| #define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */ |
| #define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */ |
| #define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */ |
| #define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */ |
| #define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/ |
| #define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */ |
| |
| /* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */ |
| #define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */ |
| #define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */ |
| #define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */ |
| #define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/ |
| #define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */ |
| #define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */ |
| |
| /* 0x07 - 0x1f reserved */ |
| /* LM80_VT0_IN current Voltage 0 value */ |
| /* LM80_VT1_IN current Voltage 1 value */ |
| /* LM80_VT2_IN current Voltage 2 value */ |
| /* LM80_VT3_IN current Voltage 3 value */ |
| /* LM80_VT4_IN current Voltage 4 value */ |
| /* LM80_VT5_IN current Voltage 5 value */ |
| /* LM80_VT6_IN current Voltage 6 value */ |
| /* LM80_TEMP_IN current temperature value */ |
| /* LM80_FAN1_IN current Fan 1 count */ |
| /* LM80_FAN2_IN current Fan 2 count */ |
| /* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */ |
| /* LM80_VT0_LOW_LIM low limit val for Voltage 0 */ |
| /* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */ |
| /* LM80_VT1_LOW_LIM low limit val for Voltage 1 */ |
| /* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */ |
| /* LM80_VT2_LOW_LIM low limit val for Voltage 2 */ |
| /* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */ |
| /* LM80_VT3_LOW_LIM low limit val for Voltage 3 */ |
| /* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */ |
| /* LM80_VT4_LOW_LIM low limit val for Voltage 4 */ |
| /* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */ |
| /* LM80_VT5_LOW_LIM low limit val for Voltage 5 */ |
| /* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */ |
| /* LM80_VT6_LOW_LIM low limit val for Voltage 6 */ |
| /* LM80_THOT_LIM_UP hot temperature limit (high) */ |
| /* LM80_THOT_LIM_LO hot temperature limit (low) */ |
| /* LM80_TOS_LIM_UP OS temperature limit (high) */ |
| /* LM80_TOS_LIM_LO OS temperature limit (low) */ |
| /* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */ |
| /* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */ |
| /* 0x3e - 0x3f reserved */ |
| |
| #define LM80_ADDR 0x28 /* LM80 default addr */ |
| |
| /* typedefs *******************************************************************/ |
| |
| |
| /* function prototypes ********************************************************/ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* __INC_LM80_H */ |