include/configs/am3517_crane.h - github/trini/u-boot - Gitiles

 /*
  * am3517_crane.h - Default configuration for AM3517 CraneBoard.
  *
  * Author: Srinath.R <srinath@mistralsolutions.com>
  *
  * Based on include/configs/am3517evm.h
  *
  * Copyright (C) 2011 Mistral Solutions pvt Ltd
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  */
 #define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3_AM3517CRANE	1	/* working with CRANEBOARD */

 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */

 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap3.h>

 /*
  * Display CPU and Board information
  */
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1

 /* Clock Defines */
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)

 #undef CONFIG_USE_IRQ				/* no support for IRQs */
 #define CONFIG_MISC_INIT_R

 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1

 /*
  * Size of malloc() pool
  */
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 						/* initial data */
 /*
  * DDR related
  */
 #define CONFIG_OMAP3_MICRON_DDR		1	/* Micron DDR */
 #define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)

 /*
  * Hardware drivers
  */

 /*
  * NS16550 Configuration
  */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

 /*
  * select serial console configuration
  */
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3	/* UART3 on CRANEBOARD */

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 #define CONFIG_MMC			1
 #define CONFIG_OMAP3_MMC		1
 #define CONFIG_DOS_PARTITION		1

 /*
  * USB configuration
  * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
  * Enable CONFIG_MUSB_UDC for Device functionalities.
  */
 #define CONFIG_USB_AM35X		1
 #define CONFIG_MUSB_HCD			1

 #ifdef CONFIG_USB_AM35X

 #ifdef CONFIG_MUSB_HCD
 #define CONFIG_CMD_USB

 #define CONFIG_USB_STORAGE
 #define CONGIG_CMD_STORAGE
 #define CONFIG_CMD_FAT

 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */

 #endif /* CONFIG_MUSB_HCD */

 #ifdef CONFIG_MUSB_UDC
 /* USB device configuration */
 #define CONFIG_USB_DEVICE		1
 #define CONFIG_USB_TTY			1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID		0x0451
 #define CONFIG_USBD_PRODUCTID		0x5678
 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME	"AM3517CRANE"
 #endif /* CONFIG_MUSB_UDC */

 #endif /* CONFIG_USB_AM35X */

 /* commands to include */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/

 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
 #define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING

 #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #undef CONFIG_CMD_IMI		/* iminfo			*/
 #undef CONFIG_CMD_IMLS		/* List all found images	*/

 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
 #define CONFIG_SYS_I2C_BUS_SELECT	1
 #define CONFIG_DRIVER_OMAP34XX_I2C	1

 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access */
 							/* nand at CS0 */

 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
 #define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */

 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
 /* start of jffs2 partition */
 #define CONFIG_JFFS2_PART_OFFSET	0x680000
 #define CONFIG_JFFS2_PART_SIZE		0xf980000	/* sz of jffs2 part */

 /* Environment information */
 #define CONFIG_BOOTDELAY	10

 #define CONFIG_BOOTFILE		uImage

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyS2,115200n8\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"root=/dev/mmcblk0p2 rw " \
 		"rootfstype=ext3 rootwait\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"root=/dev/mtdblock4 rw " \
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
 		"nand read ${loadaddr} 280000 400000; " \
 		"bootm ${loadaddr}\0" \

 #define CONFIG_BOOTCOMMAND \
 	"if mmc init; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
 			"if run loaduimage; then " \
 				"run mmcboot; " \
 			"else run nandboot; " \
 			"fi; " \
 		"fi; " \
 	"else run nandboot; fi"

 #define CONFIG_AUTO_COMPLETE	1
 /*
  * Miscellaneous configurable options
  */
 #define V_PROMPT			"AM3517_CRANE # "

 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		V_PROMPT
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		32	/* max number of command */
 						/* args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */

 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
 								/* address */

 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
  * This rate is divided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ			1000

 /*-----------------------------------------------------------------------
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
 #define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
 #define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif

 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
 #define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

 /* SDRAM Bank Allocation method */
 #define SDRC_R_B_C		1

 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */

 /* **** PISMO SUPPORT *** */

 /* Configure the PISMO */
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M

 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
 						/* on one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

 #define CONFIG_SYS_FLASH_BASE		boot_flash_base

 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

 #define CONFIG_NAND_OMAP_GPMC
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_ENV_IS_IN_NAND		1
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

 #define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
 #define CONFIG_ENV_OFFSET		boot_flash_off
 #define CONFIG_ENV_ADDR			boot_flash_env_addr

 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
 /* timeout values are in ticks */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)

 /* Flash banks JFFS2 should use */
 #define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
 					CONFIG_SYS_MAX_NAND_DEVICE)
 #define CONFIG_SYS_JFFS2_MEM_NAND
 /* use flash_info[2] */
 #define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 #define CONFIG_SYS_JFFS2_NUM_BANKS	1

 #ifndef __ASSEMBLY__
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
 extern unsigned int boot_flash_off;
 extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE	0x800
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #endif /* __CONFIG_H */
	/*
	* am3517_crane.h - Default configuration for AM3517 CraneBoard.
	*
	* Author: Srinath.R <srinath@mistralsolutions.com>
	*
	* Based on include/configs/am3517evm.h
	*
	* Copyright (C) 2011 Mistral Solutions pvt Ltd
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	*/
	#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
	#define CONFIG_OMAP 1 /* in a TI OMAP core */
	#define CONFIG_OMAP34XX 1 /* which is a 34XX */
	#define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */

	#define CONFIG_EMIF4 /* The chip has EMIF4 controller */

	#include <asm/arch/cpu.h> /* get chip and board defs */
	#include <asm/arch/omap3.h>

	/*
	* Display CPU and Board information
	*/
	#define CONFIG_DISPLAY_CPUINFO 1
	#define CONFIG_DISPLAY_BOARDINFO 1

	/* Clock Defines */
	#define V_OSCK 26000000 /* Clock output from T2 */
	#define V_SCLK (V_OSCK >> 1)

	#undef CONFIG_USE_IRQ /* no support for IRQs */
	#define CONFIG_MISC_INIT_R

	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1
	#define CONFIG_REVISION_TAG 1

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
	/* initial data */
	/*
	* DDR related
	*/
	#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */
	#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)

	/*
	* Hardware drivers
	*/

	/*
	* NS16550 Configuration
	*/
	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */

	#define CONFIG_SYS_NS16550
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK

	/*
	* select serial console configuration
	*/
	#define CONFIG_CONS_INDEX 3
	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	#define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	115200}
	#define CONFIG_MMC 1
	#define CONFIG_OMAP3_MMC 1
	#define CONFIG_DOS_PARTITION 1

	/*
	* USB configuration
	* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
	* Enable CONFIG_MUSB_UDC for Device functionalities.
	*/
	#define CONFIG_USB_AM35X 1
	#define CONFIG_MUSB_HCD 1

	#ifdef CONFIG_USB_AM35X

	#ifdef CONFIG_MUSB_HCD
	#define CONFIG_CMD_USB

	#define CONFIG_USB_STORAGE
	#define CONGIG_CMD_STORAGE
	#define CONFIG_CMD_FAT

	#ifdef CONFIG_USB_KEYBOARD
	#define CONFIG_SYS_USB_EVENT_POLL
	#define CONFIG_PREBOOT "usb start"
	#endif /* CONFIG_USB_KEYBOARD */

	#endif /* CONFIG_MUSB_HCD */

	#ifdef CONFIG_MUSB_UDC
	/* USB device configuration */
	#define CONFIG_USB_DEVICE 1
	#define CONFIG_USB_TTY 1
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	/* Change these to suit your needs */
	#define CONFIG_USBD_VENDORID 0x0451
	#define CONFIG_USBD_PRODUCTID 0x5678
	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	#define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE"
	#endif /* CONFIG_MUSB_UDC */

	#endif /* CONFIG_USB_AM35X */

	/* commands to include */
	#include <config_cmd_default.h>

	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	#define CONFIG_CMD_FAT /* FAT support */
	#define CONFIG_CMD_JFFS2 /* JFFS2 Support */

	#define CONFIG_CMD_I2C /* I2C serial bus support */
	#define CONFIG_CMD_MMC /* MMC support */
	#define CONFIG_CMD_NAND /* NAND support */
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_PING

	#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	#undef CONFIG_CMD_IMI /* iminfo */
	#undef CONFIG_CMD_IMLS /* List all found images */

	#define CONFIG_SYS_NO_FLASH
	#define CONFIG_HARD_I2C 1
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SLAVE 1
	#define CONFIG_SYS_I2C_BUS 0
	#define CONFIG_SYS_I2C_BUS_SELECT 1
	#define CONFIG_DRIVER_OMAP34XX_I2C 1

	#undef CONFIG_CMD_NET
	#undef CONFIG_CMD_NFS
	/*
	* Board NAND Info.
	*/
	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	/* to access nand */
	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	/* to access */
	/* nand at CS0 */

	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
	/* NAND devices */
	#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */

	#define CONFIG_JFFS2_NAND
	/* nand device jffs2 lives on */
	#define CONFIG_JFFS2_DEV "nand0"
	/* start of jffs2 partition */
	#define CONFIG_JFFS2_PART_OFFSET 0x680000
	#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */

	/* Environment information */
	#define CONFIG_BOOTDELAY 10

	#define CONFIG_BOOTFILE uImage

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"console=ttyS2,115200n8\0" \
	"mmcargs=setenv bootargs console=${console} " \
	"root=/dev/mmcblk0p2 rw " \
	"rootfstype=ext3 rootwait\0" \
	"nandargs=setenv bootargs console=${console} " \
	"root=/dev/mtdblock4 rw " \
	"rootfstype=jffs2\0" \
	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source ${loadaddr}\0" \
	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs; " \
	"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
	"run nandargs; " \
	"nand read ${loadaddr} 280000 400000; " \
	"bootm ${loadaddr}\0" \

	#define CONFIG_BOOTCOMMAND \
	"if mmc init; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loaduimage; then " \
	"run mmcboot; " \
	"else run nandboot; " \
	"fi; " \
	"fi; " \
	"else run nandboot; fi"

	#define CONFIG_AUTO_COMPLETE 1
	/*
	* Miscellaneous configurable options
	*/
	#define V_PROMPT "AM3517_CRANE # "

	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	#define CONFIG_SYS_PROMPT V_PROMPT
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 32 /* max number of command */
	/* args */
	/* Boot Argument Buffer Size */
	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	/* memtest works on */
	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	0x01F00000) /* 31MB */

	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
	/* address */

	/*
	* AM3517 has 12 GP timers, they can be driven by the system clock
	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	* This rate is divided by a local divisor.
	*/
	#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
	#define CONFIG_SYS_HZ 1000

	/*-----------------------------------------------------------------------
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
	#ifdef CONFIG_USE_IRQ
	#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
	#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
	#endif

	/*-----------------------------------------------------------------------
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
	#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1

	/* SDRAM Bank Allocation method */
	#define SDRC_R_B_C 1

	/*-----------------------------------------------------------------------
	* FLASH and environment organization
	*/

	/* ** PISMO SUPPORT * */

	/* Configure the PISMO */
	#define PISMO1_NAND_SIZE GPMC_SIZE_128M
	#define PISMO1_ONEN_SIZE GPMC_SIZE_128M

	#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
	/* on one chip */
	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */

	#define CONFIG_SYS_FLASH_BASE boot_flash_base

	/* Monitor at start of flash */
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE

	#define CONFIG_NAND_OMAP_GPMC
	#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
	#define CONFIG_ENV_IS_IN_NAND 1
	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */

	#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
	#define CONFIG_ENV_OFFSET boot_flash_off
	#define CONFIG_ENV_ADDR boot_flash_env_addr

	/*-----------------------------------------------------------------------
	* CFI FLASH driver setup
	*/
	/* timeout values are in ticks */
	#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
	#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)

	/* Flash banks JFFS2 should use */
	#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
	CONFIG_SYS_MAX_NAND_DEVICE)
	#define CONFIG_SYS_JFFS2_MEM_NAND
	/* use flash_info[2] */
	#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
	#define CONFIG_SYS_JFFS2_NUM_BANKS 1

	#ifndef __ASSEMBLY__
	extern unsigned int boot_flash_base;
	extern volatile unsigned int boot_flash_env_addr;
	extern unsigned int boot_flash_off;
	extern unsigned int boot_flash_sec;
	extern unsigned int boot_flash_type;
	#endif

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	CONFIG_SYS_INIT_RAM_SIZE - \
	GENERATED_GBL_DATA_SIZE)
	#endif /* __CONFIG_H */