| Summary |
| ======= |
| This README assumes you have read README.da850. It contains some additional |
| information specific to building the omapl138-lcdk. The AIS file as generated |
| by the build is, currently, not useable due to differences in the flash |
| available on this board, as compared to the da850evm boards. |
| |
| Flash Differences |
| ================= |
| Refer to the discussion in [1] for more detail - basically the da850evm uses |
| SPI flash whereas the lcdk uses NAND flash to store the bootloader, and |
| the support isn't there in the SPL code. |
| |
| It should be possible to add the support in the SPL code should someone be |
| sufficiently motivated. |
| |
| Using the built image |
| ===================== |
| The output image to use is u-boot.bin. This needs to be converted to an |
| AIS file as described in [1] and then flashed using the utitilty linked to |
| there and also described in README.da850. You _may_ be able to write using |
| u-boot itself, but the commands in README.da850 won't work as they write to |
| SPI rather than NAND. |
| |
| Links |
| ===== |
| [1] |
| http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/386829 |