| /* |
| * Clock setup for SMDK5250 board based on EXYNOS5 |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <asm/io.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/spl.h> |
| #include <asm/arch/dwmmc.h> |
| |
| #include "clock_init.h" |
| #include "common_setup.h" |
| #include "exynos5_setup.h" |
| |
| #define FSYS1_MMC0_DIV_MASK 0xff0f |
| #define FSYS1_MMC0_DIV_VAL 0x0701 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct arm_clk_ratios arm_clk_ratios[] = { |
| #ifdef CONFIG_EXYNOS5420 |
| { |
| .arm_freq_mhz = 900, |
| |
| .apll_mdiv = 0x96, |
| .apll_pdiv = 0x2, |
| .apll_sdiv = 0x1, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x3, |
| .pclk_dbg_ratio = 0x6, |
| .atb_ratio = 0x6, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x0, |
| .cpud_ratio = 0x2, |
| .arm_ratio = 0x0, |
| } |
| #else |
| { |
| .arm_freq_mhz = 600, |
| |
| .apll_mdiv = 0xc8, |
| .apll_pdiv = 0x4, |
| .apll_sdiv = 0x1, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x1, |
| .pclk_dbg_ratio = 0x1, |
| .atb_ratio = 0x2, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x7, |
| .cpud_ratio = 0x1, |
| .arm_ratio = 0x0, |
| }, { |
| .arm_freq_mhz = 800, |
| |
| .apll_mdiv = 0x64, |
| .apll_pdiv = 0x3, |
| .apll_sdiv = 0x0, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x1, |
| .pclk_dbg_ratio = 0x1, |
| .atb_ratio = 0x3, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x7, |
| .cpud_ratio = 0x2, |
| .arm_ratio = 0x0, |
| }, { |
| .arm_freq_mhz = 1000, |
| |
| .apll_mdiv = 0x7d, |
| .apll_pdiv = 0x3, |
| .apll_sdiv = 0x0, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x1, |
| .pclk_dbg_ratio = 0x1, |
| .atb_ratio = 0x4, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x7, |
| .cpud_ratio = 0x2, |
| .arm_ratio = 0x0, |
| }, { |
| .arm_freq_mhz = 1200, |
| |
| .apll_mdiv = 0x96, |
| .apll_pdiv = 0x3, |
| .apll_sdiv = 0x0, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x3, |
| .pclk_dbg_ratio = 0x1, |
| .atb_ratio = 0x5, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x7, |
| .cpud_ratio = 0x3, |
| .arm_ratio = 0x0, |
| }, { |
| .arm_freq_mhz = 1400, |
| |
| .apll_mdiv = 0xaf, |
| .apll_pdiv = 0x3, |
| .apll_sdiv = 0x0, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x3, |
| .pclk_dbg_ratio = 0x1, |
| .atb_ratio = 0x6, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x7, |
| .cpud_ratio = 0x3, |
| .arm_ratio = 0x0, |
| }, { |
| .arm_freq_mhz = 1700, |
| |
| .apll_mdiv = 0x1a9, |
| .apll_pdiv = 0x6, |
| .apll_sdiv = 0x0, |
| |
| .arm2_ratio = 0x0, |
| .apll_ratio = 0x3, |
| .pclk_dbg_ratio = 0x1, |
| .atb_ratio = 0x6, |
| .periph_ratio = 0x7, |
| .acp_ratio = 0x7, |
| .cpud_ratio = 0x3, |
| .arm_ratio = 0x0, |
| } |
| #endif |
| }; |
| |
| struct mem_timings mem_timings[] = { |
| #ifdef CONFIG_EXYNOS5420 |
| { |
| .mem_manuf = MEM_MANUF_SAMSUNG, |
| .mem_type = DDR_MODE_DDR3, |
| .frequency_mhz = 800, |
| |
| /* MPLL @800MHz*/ |
| .mpll_mdiv = 0xc8, |
| .mpll_pdiv = 0x3, |
| .mpll_sdiv = 0x1, |
| /* CPLL @666MHz */ |
| .cpll_mdiv = 0xde, |
| .cpll_pdiv = 0x4, |
| .cpll_sdiv = 0x1, |
| /* EPLL @600MHz */ |
| .epll_mdiv = 0x64, |
| .epll_pdiv = 0x2, |
| .epll_sdiv = 0x1, |
| /* VPLL @430MHz */ |
| .vpll_mdiv = 0xd7, |
| .vpll_pdiv = 0x3, |
| .vpll_sdiv = 0x2, |
| /* BPLL @800MHz */ |
| .bpll_mdiv = 0xc8, |
| .bpll_pdiv = 0x3, |
| .bpll_sdiv = 0x1, |
| /* KPLL @600MHz */ |
| .kpll_mdiv = 0x190, |
| .kpll_pdiv = 0x4, |
| .kpll_sdiv = 0x2, |
| /* DPLL @600MHz */ |
| .dpll_mdiv = 0x190, |
| .dpll_pdiv = 0x4, |
| .dpll_sdiv = 0x2, |
| /* IPLL @370MHz */ |
| .ipll_mdiv = 0xb9, |
| .ipll_pdiv = 0x3, |
| .ipll_sdiv = 0x2, |
| /* SPLL @400MHz */ |
| .spll_mdiv = 0xc8, |
| .spll_pdiv = 0x3, |
| .spll_sdiv = 0x2, |
| /* RPLL @141Mhz */ |
| .rpll_mdiv = 0x5E, |
| .rpll_pdiv = 0x2, |
| .rpll_sdiv = 0x3, |
| |
| .direct_cmd_msr = { |
| 0x00020018, 0x00030000, 0x00010046, 0x00000d70, |
| 0x00000c70 |
| }, |
| .timing_ref = 0x000000bb, |
| .timing_row = 0x6836650f, |
| .timing_data = 0x3630580b, |
| .timing_power = 0x41000a26, |
| .phy0_dqs = 0x08080808, |
| .phy1_dqs = 0x08080808, |
| .phy0_dq = 0x08080808, |
| .phy1_dq = 0x08080808, |
| .phy0_tFS = 0x8, |
| .phy1_tFS = 0x8, |
| .phy0_pulld_dqs = 0xf, |
| .phy1_pulld_dqs = 0xf, |
| |
| .lpddr3_ctrl_phy_reset = 0x1, |
| .ctrl_start_point = 0x10, |
| .ctrl_inc = 0x10, |
| .ctrl_start = 0x1, |
| .ctrl_dll_on = 0x1, |
| .ctrl_ref = 0x8, |
| |
| .ctrl_force = 0x1a, |
| .ctrl_rdlat = 0x0b, |
| .ctrl_bstlen = 0x08, |
| |
| .fp_resync = 0x8, |
| .iv_size = 0x7, |
| .dfi_init_start = 1, |
| .aref_en = 1, |
| |
| .rd_fetch = 0x3, |
| |
| .zq_mode_dds = 0x7, |
| .zq_mode_term = 0x1, |
| .zq_mode_noterm = 1, |
| |
| /* |
| * Dynamic Clock: Always Running |
| * Memory Burst length: 8 |
| * Number of chips: 1 |
| * Memory Bus width: 32 bit |
| * Memory Type: DDR3 |
| * Additional Latancy for PLL: 0 Cycle |
| */ |
| .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | |
| DMC_MEMCONTROL_DPWRDN_DISABLE | |
| DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | |
| DMC_MEMCONTROL_TP_DISABLE | |
| DMC_MEMCONTROL_DSREF_DISABLE | |
| DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | |
| DMC_MEMCONTROL_MEM_TYPE_DDR3 | |
| DMC_MEMCONTROL_MEM_WIDTH_32BIT | |
| DMC_MEMCONTROL_NUM_CHIP_1 | |
| DMC_MEMCONTROL_BL_8 | |
| DMC_MEMCONTROL_PZQ_DISABLE | |
| DMC_MEMCONTROL_MRR_BYTE_7_0, |
| .memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT | |
| DMC_MEMCONFIGX_CHIP_COL_10 | |
| DMC_MEMCONFIGX_CHIP_ROW_15 | |
| DMC_MEMCONFIGX_CHIP_BANK_8, |
| .prechconfig_tp_cnt = 0xff, |
| .dpwrdn_cyc = 0xff, |
| .dsref_cyc = 0xffff, |
| .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | |
| DMC_CONCONTROL_TIMEOUT_LEVEL0 | |
| DMC_CONCONTROL_RD_FETCH_DISABLE | |
| DMC_CONCONTROL_EMPTY_DISABLE | |
| DMC_CONCONTROL_AREF_EN_DISABLE | |
| DMC_CONCONTROL_IO_PD_CON_DISABLE, |
| .dmc_channels = 1, |
| .chips_per_channel = 1, |
| .chips_to_configure = 1, |
| .send_zq_init = 1, |
| .gate_leveling_enable = 1, |
| .read_leveling_enable = 0, |
| } |
| #else |
| { |
| .mem_manuf = MEM_MANUF_ELPIDA, |
| .mem_type = DDR_MODE_DDR3, |
| .frequency_mhz = 800, |
| .mpll_mdiv = 0xc8, |
| .mpll_pdiv = 0x3, |
| .mpll_sdiv = 0x0, |
| .cpll_mdiv = 0xde, |
| .cpll_pdiv = 0x4, |
| .cpll_sdiv = 0x2, |
| .gpll_mdiv = 0x215, |
| .gpll_pdiv = 0xc, |
| .gpll_sdiv = 0x1, |
| .epll_mdiv = 0x60, |
| .epll_pdiv = 0x3, |
| .epll_sdiv = 0x3, |
| .vpll_mdiv = 0x96, |
| .vpll_pdiv = 0x3, |
| .vpll_sdiv = 0x2, |
| |
| .bpll_mdiv = 0x64, |
| .bpll_pdiv = 0x3, |
| .bpll_sdiv = 0x0, |
| .pclk_cdrex_ratio = 0x5, |
| .direct_cmd_msr = { |
| 0x00020018, 0x00030000, 0x00010042, 0x00000d70 |
| }, |
| .timing_ref = 0x000000bb, |
| .timing_row = 0x8c36650e, |
| .timing_data = 0x3630580b, |
| .timing_power = 0x41000a44, |
| .phy0_dqs = 0x08080808, |
| .phy1_dqs = 0x08080808, |
| .phy0_dq = 0x08080808, |
| .phy1_dq = 0x08080808, |
| .phy0_tFS = 0x4, |
| .phy1_tFS = 0x4, |
| .phy0_pulld_dqs = 0xf, |
| .phy1_pulld_dqs = 0xf, |
| |
| .lpddr3_ctrl_phy_reset = 0x1, |
| .ctrl_start_point = 0x10, |
| .ctrl_inc = 0x10, |
| .ctrl_start = 0x1, |
| .ctrl_dll_on = 0x1, |
| .ctrl_ref = 0x8, |
| |
| .ctrl_force = 0x1a, |
| .ctrl_rdlat = 0x0b, |
| .ctrl_bstlen = 0x08, |
| |
| .fp_resync = 0x8, |
| .iv_size = 0x7, |
| .dfi_init_start = 1, |
| .aref_en = 1, |
| |
| .rd_fetch = 0x3, |
| |
| .zq_mode_dds = 0x7, |
| .zq_mode_term = 0x1, |
| .zq_mode_noterm = 0, |
| |
| /* |
| * Dynamic Clock: Always Running |
| * Memory Burst length: 8 |
| * Number of chips: 1 |
| * Memory Bus width: 32 bit |
| * Memory Type: DDR3 |
| * Additional Latancy for PLL: 0 Cycle |
| */ |
| .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | |
| DMC_MEMCONTROL_DPWRDN_DISABLE | |
| DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | |
| DMC_MEMCONTROL_TP_DISABLE | |
| DMC_MEMCONTROL_DSREF_ENABLE | |
| DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | |
| DMC_MEMCONTROL_MEM_TYPE_DDR3 | |
| DMC_MEMCONTROL_MEM_WIDTH_32BIT | |
| DMC_MEMCONTROL_NUM_CHIP_1 | |
| DMC_MEMCONTROL_BL_8 | |
| DMC_MEMCONTROL_PZQ_DISABLE | |
| DMC_MEMCONTROL_MRR_BYTE_7_0, |
| .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED | |
| DMC_MEMCONFIGX_CHIP_COL_10 | |
| DMC_MEMCONFIGX_CHIP_ROW_15 | |
| DMC_MEMCONFIGX_CHIP_BANK_8, |
| .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), |
| .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), |
| .prechconfig_tp_cnt = 0xff, |
| .dpwrdn_cyc = 0xff, |
| .dsref_cyc = 0xffff, |
| .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | |
| DMC_CONCONTROL_TIMEOUT_LEVEL0 | |
| DMC_CONCONTROL_RD_FETCH_DISABLE | |
| DMC_CONCONTROL_EMPTY_DISABLE | |
| DMC_CONCONTROL_AREF_EN_DISABLE | |
| DMC_CONCONTROL_IO_PD_CON_DISABLE, |
| .dmc_channels = 2, |
| .chips_per_channel = 2, |
| .chips_to_configure = 1, |
| .send_zq_init = 1, |
| .impedance = IMP_OUTPUT_DRV_30_OHM, |
| .gate_leveling_enable = 0, |
| }, { |
| .mem_manuf = MEM_MANUF_SAMSUNG, |
| .mem_type = DDR_MODE_DDR3, |
| .frequency_mhz = 800, |
| .mpll_mdiv = 0xc8, |
| .mpll_pdiv = 0x3, |
| .mpll_sdiv = 0x0, |
| .cpll_mdiv = 0xde, |
| .cpll_pdiv = 0x4, |
| .cpll_sdiv = 0x2, |
| .gpll_mdiv = 0x215, |
| .gpll_pdiv = 0xc, |
| .gpll_sdiv = 0x1, |
| .epll_mdiv = 0x60, |
| .epll_pdiv = 0x3, |
| .epll_sdiv = 0x3, |
| .vpll_mdiv = 0x96, |
| .vpll_pdiv = 0x3, |
| .vpll_sdiv = 0x2, |
| |
| .bpll_mdiv = 0x64, |
| .bpll_pdiv = 0x3, |
| .bpll_sdiv = 0x0, |
| .pclk_cdrex_ratio = 0x5, |
| .direct_cmd_msr = { |
| 0x00020018, 0x00030000, 0x00010000, 0x00000d70 |
| }, |
| .timing_ref = 0x000000bb, |
| .timing_row = 0x8c36650e, |
| .timing_data = 0x3630580b, |
| .timing_power = 0x41000a44, |
| .phy0_dqs = 0x08080808, |
| .phy1_dqs = 0x08080808, |
| .phy0_dq = 0x08080808, |
| .phy1_dq = 0x08080808, |
| .phy0_tFS = 0x8, |
| .phy1_tFS = 0x8, |
| .phy0_pulld_dqs = 0xf, |
| .phy1_pulld_dqs = 0xf, |
| |
| .lpddr3_ctrl_phy_reset = 0x1, |
| .ctrl_start_point = 0x10, |
| .ctrl_inc = 0x10, |
| .ctrl_start = 0x1, |
| .ctrl_dll_on = 0x1, |
| .ctrl_ref = 0x8, |
| |
| .ctrl_force = 0x1a, |
| .ctrl_rdlat = 0x0b, |
| .ctrl_bstlen = 0x08, |
| |
| .fp_resync = 0x8, |
| .iv_size = 0x7, |
| .dfi_init_start = 1, |
| .aref_en = 1, |
| |
| .rd_fetch = 0x3, |
| |
| .zq_mode_dds = 0x5, |
| .zq_mode_term = 0x1, |
| .zq_mode_noterm = 1, |
| |
| /* |
| * Dynamic Clock: Always Running |
| * Memory Burst length: 8 |
| * Number of chips: 1 |
| * Memory Bus width: 32 bit |
| * Memory Type: DDR3 |
| * Additional Latancy for PLL: 0 Cycle |
| */ |
| .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | |
| DMC_MEMCONTROL_DPWRDN_DISABLE | |
| DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | |
| DMC_MEMCONTROL_TP_DISABLE | |
| DMC_MEMCONTROL_DSREF_ENABLE | |
| DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | |
| DMC_MEMCONTROL_MEM_TYPE_DDR3 | |
| DMC_MEMCONTROL_MEM_WIDTH_32BIT | |
| DMC_MEMCONTROL_NUM_CHIP_1 | |
| DMC_MEMCONTROL_BL_8 | |
| DMC_MEMCONTROL_PZQ_DISABLE | |
| DMC_MEMCONTROL_MRR_BYTE_7_0, |
| .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED | |
| DMC_MEMCONFIGX_CHIP_COL_10 | |
| DMC_MEMCONFIGX_CHIP_ROW_15 | |
| DMC_MEMCONFIGX_CHIP_BANK_8, |
| .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), |
| .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), |
| .prechconfig_tp_cnt = 0xff, |
| .dpwrdn_cyc = 0xff, |
| .dsref_cyc = 0xffff, |
| .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | |
| DMC_CONCONTROL_TIMEOUT_LEVEL0 | |
| DMC_CONCONTROL_RD_FETCH_DISABLE | |
| DMC_CONCONTROL_EMPTY_DISABLE | |
| DMC_CONCONTROL_AREF_EN_DISABLE | |
| DMC_CONCONTROL_IO_PD_CON_DISABLE, |
| .dmc_channels = 2, |
| .chips_per_channel = 2, |
| .chips_to_configure = 1, |
| .send_zq_init = 1, |
| .impedance = IMP_OUTPUT_DRV_40_OHM, |
| .gate_leveling_enable = 1, |
| } |
| #endif |
| }; |
| |
| /** |
| * Get the required memory type and speed (SPL version). |
| * |
| * In SPL we have no device tree, so we use the machine parameters |
| * |
| * @param mem_type Returns memory type |
| * @param frequency_mhz Returns memory speed in MHz |
| * @param arm_freq Returns ARM clock speed in MHz |
| * @param mem_manuf Return Memory Manufacturer name |
| */ |
| static void clock_get_mem_selection(enum ddr_mode *mem_type, |
| unsigned *frequency_mhz, unsigned *arm_freq, |
| enum mem_manuf *mem_manuf) |
| { |
| struct spl_machine_param *params; |
| |
| params = spl_get_machine_params(); |
| *mem_type = params->mem_type; |
| *frequency_mhz = params->frequency_mhz; |
| *arm_freq = params->arm_freq_mhz; |
| *mem_manuf = params->mem_manuf; |
| } |
| |
| /* Get the ratios for setting ARM clock */ |
| struct arm_clk_ratios *get_arm_ratios(void) |
| { |
| struct arm_clk_ratios *arm_ratio; |
| enum ddr_mode mem_type; |
| enum mem_manuf mem_manuf; |
| unsigned frequency_mhz, arm_freq; |
| int i; |
| |
| clock_get_mem_selection(&mem_type, &frequency_mhz, |
| &arm_freq, &mem_manuf); |
| |
| for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); |
| i++, arm_ratio++) { |
| if (arm_ratio->arm_freq_mhz == arm_freq) |
| return arm_ratio; |
| } |
| |
| /* will hang if failed to find clock ratio */ |
| while (1) |
| ; |
| |
| return NULL; |
| } |
| |
| struct mem_timings *clock_get_mem_timings(void) |
| { |
| struct mem_timings *mem; |
| enum ddr_mode mem_type; |
| enum mem_manuf mem_manuf; |
| unsigned frequency_mhz, arm_freq; |
| int i; |
| |
| clock_get_mem_selection(&mem_type, &frequency_mhz, |
| &arm_freq, &mem_manuf); |
| for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); |
| i++, mem++) { |
| if (mem->mem_type == mem_type && |
| mem->frequency_mhz == frequency_mhz && |
| mem->mem_manuf == mem_manuf) |
| return mem; |
| } |
| |
| /* will hang if failed to find memory timings */ |
| while (1) |
| ; |
| |
| return NULL; |
| } |
| |
| static void exynos5250_system_clock_init(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| struct mem_timings *mem; |
| struct arm_clk_ratios *arm_clk_ratio; |
| u32 val, tmp; |
| |
| mem = clock_get_mem_timings(); |
| arm_clk_ratio = get_arm_ratios(); |
| |
| clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); |
| do { |
| val = readl(&clk->mux_stat_cpu); |
| } while ((val | MUX_APLL_SEL_MASK) != val); |
| |
| clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK); |
| do { |
| val = readl(&clk->mux_stat_core1); |
| } while ((val | MUX_MPLL_SEL_MASK) != val); |
| |
| clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK); |
| clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK); |
| clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK); |
| clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK); |
| tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK |
| | MUX_GPLL_SEL_MASK; |
| do { |
| val = readl(&clk->mux_stat_top2); |
| } while ((val | tmp) != val); |
| |
| clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK); |
| do { |
| val = readl(&clk->mux_stat_cdrex); |
| } while ((val | MUX_BPLL_SEL_MASK) != val); |
| |
| /* PLL locktime */ |
| writel(mem->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock); |
| writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock); |
| writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock); |
| writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock); |
| writel(mem->gpll_pdiv * PLL_X_LOCK_FACTOR, &clk->gpll_lock); |
| writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock); |
| writel(mem->vpll_pdiv * PLL_X_LOCK_FACTOR, &clk->vpll_lock); |
| |
| writel(CLK_REG_DISABLE, &clk->pll_div2_sel); |
| |
| writel(MUX_HPM_SEL_MASK, &clk->src_cpu); |
| do { |
| val = readl(&clk->mux_stat_cpu); |
| } while ((val | HPM_SEL_SCLK_MPLL) != val); |
| |
| val = arm_clk_ratio->arm2_ratio << 28 |
| | arm_clk_ratio->apll_ratio << 24 |
| | arm_clk_ratio->pclk_dbg_ratio << 20 |
| | arm_clk_ratio->atb_ratio << 16 |
| | arm_clk_ratio->periph_ratio << 12 |
| | arm_clk_ratio->acp_ratio << 8 |
| | arm_clk_ratio->cpud_ratio << 4 |
| | arm_clk_ratio->arm_ratio; |
| writel(val, &clk->div_cpu0); |
| do { |
| val = readl(&clk->div_stat_cpu0); |
| } while (0 != val); |
| |
| writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); |
| do { |
| val = readl(&clk->div_stat_cpu1); |
| } while (0 != val); |
| |
| /* Set APLL */ |
| writel(APLL_CON1_VAL, &clk->apll_con1); |
| val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv, |
| arm_clk_ratio->apll_sdiv); |
| writel(val, &clk->apll_con0); |
| while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set MPLL */ |
| writel(MPLL_CON1_VAL, &clk->mpll_con1); |
| val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); |
| writel(val, &clk->mpll_con0); |
| while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set BPLL */ |
| writel(BPLL_CON1_VAL, &clk->bpll_con1); |
| val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); |
| writel(val, &clk->bpll_con0); |
| while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set CPLL */ |
| writel(CPLL_CON1_VAL, &clk->cpll_con1); |
| val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); |
| writel(val, &clk->cpll_con0); |
| while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set GPLL */ |
| writel(GPLL_CON1_VAL, &clk->gpll_con1); |
| val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv); |
| writel(val, &clk->gpll_con0); |
| while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set EPLL */ |
| writel(EPLL_CON2_VAL, &clk->epll_con2); |
| writel(EPLL_CON1_VAL, &clk->epll_con1); |
| val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); |
| writel(val, &clk->epll_con0); |
| while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set VPLL */ |
| writel(VPLL_CON2_VAL, &clk->vpll_con2); |
| writel(VPLL_CON1_VAL, &clk->vpll_con1); |
| val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); |
| writel(val, &clk->vpll_con0); |
| while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0) |
| ; |
| |
| writel(CLK_SRC_CORE0_VAL, &clk->src_core0); |
| writel(CLK_DIV_CORE0_VAL, &clk->div_core0); |
| while (readl(&clk->div_stat_core0) != 0) |
| ; |
| |
| writel(CLK_DIV_CORE1_VAL, &clk->div_core1); |
| while (readl(&clk->div_stat_core1) != 0) |
| ; |
| |
| writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt); |
| while (readl(&clk->div_stat_sysrgt) != 0) |
| ; |
| |
| writel(CLK_DIV_ACP_VAL, &clk->div_acp); |
| while (readl(&clk->div_stat_acp) != 0) |
| ; |
| |
| writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft); |
| while (readl(&clk->div_stat_syslft) != 0) |
| ; |
| |
| writel(CLK_SRC_TOP0_VAL, &clk->src_top0); |
| writel(CLK_SRC_TOP1_VAL, &clk->src_top1); |
| writel(TOP2_VAL, &clk->src_top2); |
| writel(CLK_SRC_TOP3_VAL, &clk->src_top3); |
| |
| writel(CLK_DIV_TOP0_VAL, &clk->div_top0); |
| while (readl(&clk->div_stat_top0)) |
| ; |
| |
| writel(CLK_DIV_TOP1_VAL, &clk->div_top1); |
| while (readl(&clk->div_stat_top1)) |
| ; |
| |
| writel(CLK_SRC_LEX_VAL, &clk->src_lex); |
| while (1) { |
| val = readl(&clk->mux_stat_lex); |
| if (val == (val | 1)) |
| break; |
| } |
| |
| writel(CLK_DIV_LEX_VAL, &clk->div_lex); |
| while (readl(&clk->div_stat_lex)) |
| ; |
| |
| writel(CLK_DIV_R0X_VAL, &clk->div_r0x); |
| while (readl(&clk->div_stat_r0x)) |
| ; |
| |
| writel(CLK_DIV_R0X_VAL, &clk->div_r0x); |
| while (readl(&clk->div_stat_r0x)) |
| ; |
| |
| writel(CLK_DIV_R1X_VAL, &clk->div_r1x); |
| while (readl(&clk->div_stat_r1x)) |
| ; |
| |
| writel(CLK_REG_DISABLE, &clk->src_cdrex); |
| |
| writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); |
| while (readl(&clk->div_stat_cdrex)) |
| ; |
| |
| val = readl(&clk->src_cpu); |
| val |= CLK_SRC_CPU_VAL; |
| writel(val, &clk->src_cpu); |
| |
| val = readl(&clk->src_top2); |
| val |= CLK_SRC_TOP2_VAL; |
| writel(val, &clk->src_top2); |
| |
| val = readl(&clk->src_core1); |
| val |= CLK_SRC_CORE1_VAL; |
| writel(val, &clk->src_core1); |
| |
| writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); |
| writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); |
| while (readl(&clk->div_stat_fsys0)) |
| ; |
| |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_core); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_top); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex); |
| |
| writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); |
| writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); |
| |
| writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); |
| writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); |
| writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); |
| writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); |
| |
| writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp); |
| writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp); |
| writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); |
| writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); |
| writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); |
| |
| /* FIMD1 SRC CLK SELECTION */ |
| writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0); |
| |
| val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET |
| | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET |
| | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET |
| | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET; |
| writel(val, &clk->div_fsys2); |
| } |
| |
| static void exynos5420_system_clock_init(void) |
| { |
| struct exynos5420_clock *clk = |
| (struct exynos5420_clock *)samsung_get_base_clock(); |
| struct mem_timings *mem; |
| struct arm_clk_ratios *arm_clk_ratio; |
| u32 val; |
| |
| mem = clock_get_mem_timings(); |
| arm_clk_ratio = get_arm_ratios(); |
| |
| /* PLL locktime */ |
| writel(arm_clk_ratio->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock); |
| writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock); |
| writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock); |
| writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock); |
| writel(mem->dpll_pdiv * PLL_LOCK_FACTOR, &clk->dpll_lock); |
| writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock); |
| writel(mem->vpll_pdiv * PLL_LOCK_FACTOR, &clk->vpll_lock); |
| writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock); |
| writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock); |
| writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock); |
| writel(mem->rpll_pdiv * PLL_X_LOCK_FACTOR, &clk->rpll_lock); |
| |
| setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK); |
| |
| writel(0, &clk->src_top6); |
| |
| writel(0, &clk->src_cdrex); |
| writel(SRC_KFC_HPM_SEL, &clk->src_kfc); |
| writel(HPM_RATIO, &clk->div_cpu1); |
| writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); |
| |
| /* switch A15 clock source to OSC clock before changing APLL */ |
| clrbits_le32(&clk->src_cpu, APLL_FOUT); |
| |
| /* Set APLL */ |
| writel(APLL_CON1_VAL, &clk->apll_con1); |
| val = set_pll(arm_clk_ratio->apll_mdiv, |
| arm_clk_ratio->apll_pdiv, |
| arm_clk_ratio->apll_sdiv); |
| writel(val, &clk->apll_con0); |
| while ((readl(&clk->apll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* now it is safe to switch to APLL */ |
| setbits_le32(&clk->src_cpu, APLL_FOUT); |
| |
| writel(SRC_KFC_HPM_SEL, &clk->src_kfc); |
| writel(CLK_DIV_KFC_VAL, &clk->div_kfc0); |
| |
| /* switch A7 clock source to OSC clock before changing KPLL */ |
| clrbits_le32(&clk->src_kfc, KPLL_FOUT); |
| |
| /* Set KPLL*/ |
| writel(KPLL_CON1_VAL, &clk->kpll_con1); |
| val = set_pll(mem->kpll_mdiv, mem->kpll_pdiv, mem->kpll_sdiv); |
| writel(val, &clk->kpll_con0); |
| while ((readl(&clk->kpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* now it is safe to switch to KPLL */ |
| setbits_le32(&clk->src_kfc, KPLL_FOUT); |
| |
| /* Set MPLL */ |
| writel(MPLL_CON1_VAL, &clk->mpll_con1); |
| val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); |
| writel(val, &clk->mpll_con0); |
| while ((readl(&clk->mpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set DPLL */ |
| writel(DPLL_CON1_VAL, &clk->dpll_con1); |
| val = set_pll(mem->dpll_mdiv, mem->dpll_pdiv, mem->dpll_sdiv); |
| writel(val, &clk->dpll_con0); |
| while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set EPLL */ |
| writel(EPLL_CON2_VAL, &clk->epll_con2); |
| writel(EPLL_CON1_VAL, &clk->epll_con1); |
| val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); |
| writel(val, &clk->epll_con0); |
| while ((readl(&clk->epll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set CPLL */ |
| writel(CPLL_CON1_VAL, &clk->cpll_con1); |
| val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); |
| writel(val, &clk->cpll_con0); |
| while ((readl(&clk->cpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set IPLL */ |
| writel(IPLL_CON1_VAL, &clk->ipll_con1); |
| val = set_pll(mem->ipll_mdiv, mem->ipll_pdiv, mem->ipll_sdiv); |
| writel(val, &clk->ipll_con0); |
| while ((readl(&clk->ipll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set VPLL */ |
| writel(VPLL_CON1_VAL, &clk->vpll_con1); |
| val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); |
| writel(val, &clk->vpll_con0); |
| while ((readl(&clk->vpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set BPLL */ |
| writel(BPLL_CON1_VAL, &clk->bpll_con1); |
| val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); |
| writel(val, &clk->bpll_con0); |
| while ((readl(&clk->bpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set SPLL */ |
| writel(SPLL_CON1_VAL, &clk->spll_con1); |
| val = set_pll(mem->spll_mdiv, mem->spll_pdiv, mem->spll_sdiv); |
| writel(val, &clk->spll_con0); |
| while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| /* Set RPLL */ |
| writel(RPLL_CON2_VAL, &clk->rpll_con2); |
| writel(RPLL_CON1_VAL, &clk->rpll_con1); |
| val = set_pll(mem->rpll_mdiv, mem->rpll_pdiv, mem->rpll_sdiv); |
| writel(val, &clk->rpll_con0); |
| while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0) |
| ; |
| |
| writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0); |
| writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1); |
| |
| writel(CLK_SRC_TOP0_VAL, &clk->src_top0); |
| writel(CLK_SRC_TOP1_VAL, &clk->src_top1); |
| writel(CLK_SRC_TOP2_VAL, &clk->src_top2); |
| writel(CLK_SRC_TOP7_VAL, &clk->src_top7); |
| |
| writel(CLK_DIV_TOP0_VAL, &clk->div_top0); |
| writel(CLK_DIV_TOP1_VAL, &clk->div_top1); |
| writel(CLK_DIV_TOP2_VAL, &clk->div_top2); |
| |
| writel(0, &clk->src_top10); |
| writel(0, &clk->src_top11); |
| writel(0, &clk->src_top12); |
| |
| writel(CLK_SRC_TOP3_VAL, &clk->src_top3); |
| writel(CLK_SRC_TOP4_VAL, &clk->src_top4); |
| writel(CLK_SRC_TOP5_VAL, &clk->src_top5); |
| |
| /* DISP1 BLK CLK SELECTION */ |
| writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp10); |
| writel(CLK_DIV_DISP1_0_VAL, &clk->div_disp10); |
| |
| /* AUDIO BLK */ |
| writel(AUDIO0_SEL_EPLL, &clk->src_mau); |
| writel(DIV_MAU_VAL, &clk->div_mau); |
| |
| /* FSYS */ |
| writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); |
| writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); |
| writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1); |
| writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2); |
| |
| writel(CLK_SRC_ISP_VAL, &clk->src_isp); |
| writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); |
| writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); |
| |
| writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); |
| writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); |
| |
| writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); |
| writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); |
| writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); |
| writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); |
| writel(CLK_DIV_PERIC4_VAL, &clk->div_peric4); |
| |
| writel(CLK_DIV_CPERI1_VAL, &clk->div_cperi1); |
| |
| writel(CLK_DIV2_RATIO, &clk->clkdiv2_ratio); |
| writel(CLK_DIV4_RATIO, &clk->clkdiv4_ratio); |
| writel(CLK_DIV_G2D, &clk->div_g2d); |
| |
| writel(CLK_SRC_TOP6_VAL, &clk->src_top6); |
| writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex); |
| writel(CLK_SRC_KFC_VAL, &clk->src_kfc); |
| } |
| |
| void system_clock_init(void) |
| { |
| if (proid_is_exynos5420() || proid_is_exynos5422()) |
| exynos5420_system_clock_init(); |
| else |
| exynos5250_system_clock_init(); |
| } |
| |
| void clock_init_dp_clock(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| |
| /* DP clock enable */ |
| setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW); |
| |
| /* We run DP at 267 Mhz */ |
| setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1); |
| } |
| |
| /* |
| * Set clock divisor value for booting from EMMC. |
| * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz. |
| */ |
| void emmc_boot_clk_div_set(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned int div_mmc; |
| |
| div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK; |
| div_mmc |= FSYS1_MMC0_DIV_VAL; |
| writel(div_mmc, (unsigned int) &clk->div_fsys1); |
| } |